baclay9's 83' SWB Build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

baclay9 · 09-07-2010, 06:05 PM

Quote:

Originally Posted by scotts62

I think i found all the parts to the serp setup too, ill try and lay it out to be sure..

Cool deal man. I appreciate it. By the way, the oil pan I got from you is way to shallow. I bet your buddy had a really short oil pump on his boat and had to have that pan custom made to clear the hull or something. Sooo, you are going to get a sandblasted and nicely painted pan back.

**scotts62** · 09-07-2010, 06:43 PM

Thanks!

Is it hitting the pickup tube?

There are different ones out there if you wana try and use it, if not a stock one will look just as good

baclay9 · 09-07-2010, 07:12 PM

I just pulled the one off the donor engine ad stuck it on there. It just has one small dent in it. I figure if someone is looking that close at my oil pan they have no life.

**scotts62** · 09-07-2010, 07:15 PM

or get kicked in the arse while their down there!

JohnC · 09-08-2010, 04:04 PM

*nbpro* · 09-11-2010, 06:31 AM

sweet truck love da color on it.

baclay9 · 09-12-2010, 10:58 AM

Quote:

Originally Posted by nbpro

sweet truck love da color on it.

Thanks man but the color is going bye, bye...

Scored this on CL yesterday for the BB conversion. Had to drive about 2 hours north of where I am working to pick it up but it is in great shape. Ready to bolt on. 750 Holley w/ vacuum secondaries. Electric Choke.

By claypool782 at 2010-09-12

I also picked up these "spinners"(I guess that is what they are called) for my rallies. The caps need to be cleaned up but I can't decide if I am going to like the way they look. What do you guys think?

By claypool782 at 2010-09-12

LiveAnimals · 09-12-2010, 11:08 AM

I need that carb

joe231 · 09-12-2010, 11:25 AM

Nice score!
I'm torn on the 3 bar spinners, I dig them, but they kinda scream "circa 1980"
But if that's what your going for then your golden

Posted via Mobile Device

JohnC · 09-12-2010, 11:40 AM

I think the spinners are cool. The great thing about them is if you get tired of them you can just throw on some regular centers, and swap back from time to time. 3r!c84 has them on his truck. Here is a pic of it.

Name: 3r!c84.jpg
Views: 1014
Size: 29.4 KB

Name: 3r!c84.jpg
Views: 1014
Size: 29.4 KB

baclay9 · 09-12-2010, 12:26 PM

I am going to try and get my tires put on the rallies when I get home this time and we will see how it all looks when put together. I am just hoping I can get my caps to clean up as good as yours did Joe!

baclay9 · 09-21-2010, 09:08 PM

Well, I got a little done over the last couple of days. It is finally off the Jack stands and on the ground. I had to buy a new tire due to one of the ones I had was separated. I hated to do it seeing how this setup is temporary but the Coys just aren't in the budget right now due to all the motor work I have to do.

Here are a couple of pics. I got the newly painted rallies on with the trim rings on but still haven't cleaned up the caps yet. I had the wheels blasted and then painted them with several coats of Rustoleum Proffesional "Stainless Steel". I got all the steering system on and started running the fuel lines and got the wiring harness on. I am going to get the rest of the lines in (brake, fuel) and the tanks painted up and on later this week. I will get some better pics then.

After that it will be time to start on the 454 and tranny work.

By claypool782 at 2010-09-21

By claypool782 at 2010-09-21

More to come....

joe231 · 09-21-2010, 10:38 PM

nice work!

JohnC · 09-23-2010, 12:50 PM

Looks good man! Keep at it!

baclay9 · 09-23-2010, 09:24 PM

Here is some more. I am pretty much done with this "phase" of my build. All the fuel lines are run and the brake lines are pretty much done. I have to replace the hard brake line that goes from the proportioning valve to the frame because I had to cut them to get them off.

I got the tanks put on and everything. As soon as I get the front hard brake ins replaced I am going to slap the motor mounts on. Here are a few more pics.

By claypool782 at 2010-09-23

By claypool782 at 2010-09-23

Next time I come home it will be time to tear into this bad boy...

By claypool782 at 2010-09-23

joe231 · 09-23-2010, 09:34 PM

Right On!!

I forgot again

What paint did you use on the frame?
Posted via Mobile Device

baclay9 · 09-23-2010, 09:43 PM

Quote:

Originally Posted by joe231

Right On!!

I forgot again

What paint did you use on the frame?
Posted via Mobile Device

It is PM Industries "Chassis Black"
http://www.nomorerust.com/

Good stuff. Lays down thick and doesn't leave brush marks. It is really hard. It doesn't have a UV protectant in it though so it will fade if you leave it out in the sun. It doesn't make it chip off or anything but it takes the gloss away.

joe231 · 09-23-2010, 09:55 PM

Ah,
Yeah
Now I remember!
Thanks

Posted via Mobile Device

baclay9 · 09-29-2010, 02:35 PM

I just bought something preeettyyyy!!!!!

joe231 · 09-29-2010, 02:42 PM

Spill it!!!!

Posted via Mobile Device

**scotts62** · 09-29-2010, 05:02 PM

what?????????
Posted via Mobile Device

joe231 · 09-29-2010, 05:11 PM

come on man....
you killin' us ova here!!

*nbpro* · 09-29-2010, 07:17 PM

Looks good

baclay9 · 09-29-2010, 08:37 PM

Sorry guys, I didn't mean to leave ya hangin like that. I got slammed at work right after typing that. LOL

I ordered a set of Boss 338's today. I got 2 18x9.5 and 2 18x8's. I supposedly got two of the last three 18x8's there are available according to Eagle. I am freaking pumped. I got called out in the middle of the night the other night so they threw a little extra cash my way. I knew exactly what to do with it

Posted via Mobile Device

joe231 · 09-29-2010, 08:40 PM

Right on man!!!

Did you get gray?
After you get them, I might need to come out and test fit those on the crew to see how I like the 18's

Posted via Mobile Device

09-07-2010, 06:43 PM	#52
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build Thanks! Is it hitting the pickup tube? There are different ones out there if you wana try and use it, if not a stock one will look just as good __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 09-07-2010 at 06:44 PM.

09-07-2010, 07:12 PM	#53
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build I just pulled the one off the donor engine ad stuck it on there. It just has one small dent in it. I figure if someone is looking that close at my oil pan they have no life.

09-07-2010, 07:15 PM	#54
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build or get kicked in the arse while their down there! __________________ Scott 93 crew cab build Project 62

09-08-2010, 04:04 PM	#55
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: baclay9's 83' SWB Build

09-11-2010, 06:31 AM	#56
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: baclay9's 83' SWB Build sweet truck love da color on it.

09-12-2010, 11:08 AM	#58
LiveAnimals Registered User Join Date: Dec 2008 Location: Antelope, CA Posts: 681	Re: baclay9's 83' SWB Build I need that carb __________________ Kameron YESTERDAY IS HISTORY - TOMORROW IS A MYSTERY I'm a Middle ClASS HOLE 07.5 Dodge 3500 CTD -- Daily 73 C10 Factory BB SWB 2WD

09-12-2010, 11:25 AM	#59
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build Nice score! I'm torn on the 3 bar spinners, I dig them, but they kinda scream "circa 1980" But if that's what your going for then your golden Posted via Mobile Device __________________ *CHEVY ONLY*

09-12-2010, 11:40 AM	#60
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: baclay9's 83' SWB Build I think the spinners are cool. The great thing about them is if you get tired of them you can just throw on some regular centers, and swap back from time to time. 3r!c84 has them on his truck. Here is a pic of it. Last edited by JohnC; 09-12-2010 at 11:43 AM.

09-12-2010, 12:26 PM	#61
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build I am going to try and get my tires put on the rallies when I get home this time and we will see how it all looks when put together. I am just hoping I can get my caps to clean up as good as yours did Joe!

09-21-2010, 09:08 PM	#62
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Well, I got a little done over the last couple of days. It is finally off the Jack stands and on the ground. I had to buy a new tire due to one of the ones I had was separated. I hated to do it seeing how this setup is temporary but the Coys just aren't in the budget right now due to all the motor work I have to do. Here are a couple of pics. I got the newly painted rallies on with the trim rings on but still haven't cleaned up the caps yet. I had the wheels blasted and then painted them with several coats of Rustoleum Proffesional "Stainless Steel". I got all the steering system on and started running the fuel lines and got the wiring harness on. I am going to get the rest of the lines in (brake, fuel) and the tanks painted up and on later this week. I will get some better pics then. After that it will be time to start on the 454 and tranny work. By claypool782 at 2010-09-21 By claypool782 at 2010-09-21 By claypool782 at 2010-09-21 More to come....

09-21-2010, 10:38 PM	#63
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build nice work! __________________ *CHEVY ONLY*

09-23-2010, 12:50 PM	#64
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: baclay9's 83' SWB Build Looks good man! Keep at it!

09-23-2010, 09:24 PM	#65
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Here is some more. I am pretty much done with this "phase" of my build. All the fuel lines are run and the brake lines are pretty much done. I have to replace the hard brake line that goes from the proportioning valve to the frame because I had to cut them to get them off. I got the tanks put on and everything. As soon as I get the front hard brake ins replaced I am going to slap the motor mounts on. Here are a few more pics. By claypool782 at 2010-09-23 By claypool782 at 2010-09-23 By claypool782 at 2010-09-23 Next time I come home it will be time to tear into this bad boy... By claypool782 at 2010-09-23

09-23-2010, 09:34 PM	#66
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build Right On!! I forgot again What paint did you use on the frame? Posted via Mobile Device __________________ *CHEVY ONLY*

09-23-2010, 09:55 PM	#68
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build Ah, Yeah Now I remember! Thanks Posted via Mobile Device __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

09-29-2010, 02:35 PM	#69
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build I just bought something preeettyyyy!!!!!

09-29-2010, 02:42 PM	#70
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build Spill it!!!! Posted via Mobile Device __________________ *CHEVY ONLY*

09-29-2010, 05:02 PM	#71
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build what????????? Posted via Mobile Device __________________ Scott 93 crew cab build Project 62

09-29-2010, 05:11 PM	#72
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build come on man.... you killin' us ova here!! __________________ *CHEVY ONLY*

09-29-2010, 07:17 PM	#73
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: baclay9's 83' SWB Build Looks good

09-29-2010, 08:37 PM	#74
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Sorry guys, I didn't mean to leave ya hangin like that. I got slammed at work right after typing that. LOL I ordered a set of Boss 338's today. I got 2 18x9.5 and 2 18x8's. I supposedly got two of the last three 18x8's there are available according to Eagle. I am freaking pumped. I got called out in the middle of the night the other night so they threw a little extra cash my way. I knew exactly what to do with it Posted via Mobile Device

09-29-2010, 08:40 PM	#75
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build Right on man!!! Did you get gray? After you get them, I might need to come out and test fit those on the crew to see how I like the 18's Posted via Mobile Device __________________ *CHEVY ONLY* Last edited by joe231; 09-29-2010 at 08:42 PM.

Register or Log In To remove these advertisements.