How about some pics of Static Dropped C-10's - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CC69Rat · 09-22-2011, 09:29 PM

Here's my heap. 4.5"/6" with the extra weight up front

205/70/15 (too small IMO)
255/70/15

I just put them together for rollers right now. I have 20" Billet Specialties Dagger's on the way in a few weeks and thinking I might go lower eventually / before I finish it. The back would look lower with the steps on.

PAINTERDAVE · 09-24-2011, 08:36 AM

Quote:

Originally Posted by TxSqueeze

Here's mine with a 5.5/7 and 20's

Very nice!

Slammed66 · 10-02-2011, 02:56 PM

kinda sorta static.

spindles, cut coils.
the back is on bags with schraders..

front = 225/60/15 on 15x8 ( in search of 15x7s)
rear= 295/50/15 on 15x11

plan is to tub it over 20x14s in the future..... just a beater for now..

diamondave · 10-08-2011, 08:40 PM

Yep a ladder in the bed.. its a work truck

coontz74 · 10-13-2011, 06:02 PM

Quote:

Originally Posted by ddoles

Here is mine with with 20's.

What are your details on the drop? Very, very nice.

Exactly what I'm wanting mine to look like..

shawno72 · 10-13-2011, 06:16 PM

Name: truck 004.jpg
Views: 36026
Size: 53.3 KB

Name: truck 005.jpg
Views: 36628
Size: 55.5 KB

Name: truck 006.jpg
Views: 34411
Size: 51.8 KB

Name: truck 008.jpg
Views: 52590
Size: 49.2 KB

all 5/7 drop with p235/70r15 on 15" rally's

ddoles · 10-13-2011, 09:01 PM

Quote:

Originally Posted by coontz74

What are your details on the drop? Very, very nice.

Exactly what I'm wanting mine to look like..

Thank you very much. Front is 2.5 spindles along with 2 inch lowering springs, rear is 4 inch lowering springs and 2 inch lowering blocks, adjustable pan hard bar. Shocks are from Classic Performance.

coontz74 · 10-14-2011, 09:16 PM

Quote:

Originally Posted by ddoles

Thank you very much. Front is 2.5 spindles along with 2 inch lowering springs, rear is 4 inch lowering springs and 2 inch lowering blocks, adjustable pan hard bar. Shocks are from Classic Performance.

Do you have any more pics? You can email them to me if you want. grcoontz@comcast.net

Also could you PM me where you ordered your parts from? I am going to buy the exact same stuff you have an I want to get it from the same place so no chance of getting it wrong...(yes, I like it that much..

)

Thanks

ddoles · 10-16-2011, 09:06 PM

Quote:

Originally Posted by coontz74

Do you have any more pics? You can email them to me if you want. grcoontz@comcast.net

Also could you PM me where you ordered your parts from? I am going to buy the exact same stuff you have an I want to get it from the same place so no chance of getting it wrong...(yes, I like it that much..

)

Thanks

Sent you email.

coontz74 · 10-16-2011, 11:21 PM

Quote:

Originally Posted by ddoles

Sent you email.

Thanks...Hope mine turns out with the same stance and look as yours...

jwgeorge · 10-25-2011, 03:37 PM

Here's my 68, it is what I assume to be a 4/6 static drop with 28-inch 235/75-15 tires on it. I bought it like this and have no details other than it has 2' drop spindles on the front. I am seriously considering going up to a 2/4 drop because the mean streets of Houston make this thing ride like HELL! The angles of the shocks and the drop make the shocks almost useless. Anyone know of any drop shocks that actually work well-enough for me to keep my drop? I hope the picture attaches, no gurantees.

jwgeorge · 10-25-2011, 03:45 PM

Sorry, POS photo sharing website won't give me a link to my photos of my truck!
Why does it have to be so hard?

CC69Rat · 10-25-2011, 08:00 PM

IMO - dropped spindles wouldn't make it ride rough, but if the rear shocks are in the factory location it definitely would. ECE offers shock relocation brackets for the rear that could probably help a bunch.
Posted via Mobile Device

jwgeorge · 10-25-2011, 10:42 PM

I finally did some research and realized that the stock rear shock locations are useless with a 6" drop. I will be taking care of that soon. So this relates to the thread: If you drop the rear, relocate the shock mounts making sure that the shocks fit the application. An adjustable track bar is nice to have too. How many people with large rear drops have an adjustable rear track bar?
Is it mounted to the swingarm or the stock position?
OK, Trying to post pics of my 4/6 drop.

jwgeorge · 10-25-2011, 10:43 PM

OK, Real funny! Now how about a decent picture!

http://images2.snapfish.com/23232323...46534%3Bnu0mrj

jwgeorge · 10-25-2011, 10:44 PM

One more picture of my 4/6, with 28-inch O.D. 235/75-15 tires.

nuke1 · 11-07-2011, 05:11 PM

HERE IS MINE!! 4.5" and a 5", I want another 1.5" static lower yet

dliving69 · 11-14-2011, 01:54 PM

I really like the look of them tires and rims. what size of tires are they? 215/60?

dliving69 · 11-14-2011, 01:58 PM

Quote:

Originally Posted by 72BlckButy

Here's my '69 running an ECE 4.5/6" Drop and 6-lug disc brakes:

Attachment 768401

Attachment 768404

What size of tires are you running on the smaller rims?

69vetteside · 11-23-2011, 12:34 AM

heres mine3/4 drop 20 x9 with 235x35x20

Jarwood · 11-26-2011, 07:32 PM

I have a quick question. Working on my new project- 72 GMC. It appears to have some static drop, but how can I tell how much the drop is? The front fender measures 31 inches from the ground to bottom of fender. I have 20'' wheels. I would like to go about 2 '' lower. What are my options? I don't know if it has a drop spindle or not.....learning!

kieth · 11-30-2011, 10:13 AM

Mines a hybrid, trailing arms with bags in the rear, 6 cylinder coils in front with -2.5" spindles......17" wheels....

Name: stance10.jpg
Views: 32692
Size: 54.0 KB

kieth · 12-01-2011, 05:30 PM

Quote:

Originally Posted by Jarwood

I have a quick question. Working on my new project- 72 GMC. It appears to have some static drop, but how can I tell how much the drop is? The front fender measures 31 inches from the ground to bottom of fender. I have 20'' wheels. I would like to go about 2 '' lower. What are my options? I don't know if it has a drop spindle or not.....learning!

does not look like it has drop spindles, too much clearance in the front, do a 2.5" drop in the front you can lower the rear after you do the front so you can get the stance you want.

**lolife99** · 12-01-2011, 07:33 PM

Quote:

Originally Posted by Jarwood

I don't know if it has a drop spindle or not.....learning!

Take a picture of the spindle and post it up.
Very easy to identify.

See below:
Drop spindle on the right,...

Jarwood · 12-03-2011, 12:56 AM

I plan on tearing into the front end soon. I will post pics and maybe you guys can tell me. I definitely want to get the truck lower. There are some awesome trucks here and love the stance of a lowered look.

09-22-2011, 09:29 PM	#51
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,213	Re: How about some pics of Static Dropped C-10's Here's my heap. 4.5"/6" with the extra weight up front 205/70/15 (too small IMO) 255/70/15 I just put them together for rollers right now. I have 20" Billet Specialties Dagger's on the way in a few weeks and thinking I might go lower eventually / before I finish it. The back would look lower with the steps on. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-02-2011, 02:56 PM	#53
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: How about some pics of Static Dropped C-10's kinda sorta static. spindles, cut coils. the back is on bags with schraders.. front = 225/60/15 on 15x8 ( in search of 15x7s) rear= 295/50/15 on 15x11 plan is to tub it over 20x14s in the future..... just a beater for now.. Attached Images __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

10-08-2011, 08:40 PM	#54
diamondave Registered User Join Date: Jul 2009 Location: Luverne,Mn Posts: 92	Re: How about some pics of Static Dropped C-10's Yep a ladder in the bed.. its a work truck __________________ Static Dropped 1988 Chevrolet ECLB "Hovering less then 3 inches from the ground... full-time"

10-13-2011, 06:16 PM	#56
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: How about some pics of Static Dropped C-10's all 5/7 drop with p235/70r15 on 15" rally's __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

10-25-2011, 03:37 PM	#61
jwgeorge Registered User Join Date: Dec 2010 Location: Pearland, TX Posts: 224	Re: How about some pics of Static Dropped C-10's Here's my 68, it is what I assume to be a 4/6 static drop with 28-inch 235/75-15 tires on it. I bought it like this and have no details other than it has 2' drop spindles on the front. I am seriously considering going up to a 2/4 drop because the mean streets of Houston make this thing ride like HELL! The angles of the shocks and the drop make the shocks almost useless. Anyone know of any drop shocks that actually work well-enough for me to keep my drop? I hope the picture attaches, no gurantees. __________________ 1968 C-10 Longbed, 6-cyl., 4-speed. 832-584-1245 "You see, in this world there's two kinds of people, my friend, those with loaded guns and those who dig."

10-25-2011, 03:45 PM	#62
jwgeorge Registered User Join Date: Dec 2010 Location: Pearland, TX Posts: 224	Re: How about some pics of Static Dropped C-10's Sorry, POS photo sharing website won't give me a link to my photos of my truck! Why does it have to be so hard? __________________ 1968 C-10 Longbed, 6-cyl., 4-speed. 832-584-1245 "You see, in this world there's two kinds of people, my friend, those with loaded guns and those who dig."

10-25-2011, 08:00 PM	#63
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,213	Re: How about some pics of Static Dropped C-10's IMO - dropped spindles wouldn't make it ride rough, but if the rear shocks are in the factory location it definitely would. ECE offers shock relocation brackets for the rear that could probably help a bunch. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-25-2011, 10:42 PM	#64
jwgeorge Registered User Join Date: Dec 2010 Location: Pearland, TX Posts: 224	Re: How about some pics of Static Dropped C-10's I finally did some research and realized that the stock rear shock locations are useless with a 6" drop. I will be taking care of that soon. So this relates to the thread: If you drop the rear, relocate the shock mounts making sure that the shocks fit the application. An adjustable track bar is nice to have too. How many people with large rear drops have an adjustable rear track bar? Is it mounted to the swingarm or the stock position? OK, Trying to post pics of my 4/6 drop. __________________ 1968 C-10 Longbed, 6-cyl., 4-speed. 832-584-1245 "You see, in this world there's two kinds of people, my friend, those with loaded guns and those who dig."

10-25-2011, 10:43 PM	#65
jwgeorge Registered User Join Date: Dec 2010 Location: Pearland, TX Posts: 224	Re: How about some pics of Static Dropped C-10's OK, Real funny! Now how about a decent picture! http://images2.snapfish.com/23232323...46534%3Bnu0mrj __________________ 1968 C-10 Longbed, 6-cyl., 4-speed. 832-584-1245 "You see, in this world there's two kinds of people, my friend, those with loaded guns and those who dig."

10-25-2011, 10:44 PM	#66
jwgeorge Registered User Join Date: Dec 2010 Location: Pearland, TX Posts: 224	Re: How about some pics of Static Dropped C-10's One more picture of my 4/6, with 28-inch O.D. 235/75-15 tires. __________________ 1968 C-10 Longbed, 6-cyl., 4-speed. 832-584-1245 "You see, in this world there's two kinds of people, my friend, those with loaded guns and those who dig."

11-07-2011, 05:11 PM	#67
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: How about some pics of Static Dropped C-10's HERE IS MINE!! 4.5" and a 5", I want another 1.5" static lower yet Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

11-14-2011, 01:54 PM	#68
dliving69 Registered User Join Date: Sep 2011 Location: Neodesha, Kansas Posts: 151	Re: static drop pics I really like the look of them tires and rims. what size of tires are they? 215/60?

11-23-2011, 12:34 AM	#70
69vetteside Registered User Join Date: Nov 2011 Location: perth western australia Posts: 127	Re: How about some pics of Static Dropped C-10's heres mine3/4 drop 20 x9 with 235x35x20 Attached Images

11-26-2011, 07:32 PM	#71
Jarwood Registered User Join Date: Oct 2011 Location: Jefferson, Georgia Posts: 248	Re: How about some pics of Static Dropped C-10's I have a quick question. Working on my new project- 72 GMC. It appears to have some static drop, but how can I tell how much the drop is? The front fender measures 31 inches from the ground to bottom of fender. I have 20'' wheels. I would like to go about 2 '' lower. What are my options? I don't know if it has a drop spindle or not.....learning! Attached Images

11-30-2011, 10:13 AM	#72
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: How about some pics of Static Dropped C-10's Mines a hybrid, trailing arms with bags in the rear, 6 cylinder coils in front with -2.5" spindles......17" wheels....



Register or Log In To remove these advertisements.

12-03-2011, 12:56 AM	#75
Jarwood Registered User Join Date: Oct 2011 Location: Jefferson, Georgia Posts: 248	Re: How about some pics of Static Dropped C-10's I plan on tearing into the front end soon. I will post pics and maybe you guys can tell me. I definitely want to get the truck lower. There are some awesome trucks here and love the stance of a lowered look.

Register or Log In To remove these advertisements.