CA 72 Blazer part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 03-18-2014, 09:14 AM

Please hang in there everyone, i just removed it from my trailer and began to start un bolting..Will take a little bit of time. I will be able to spend a few hours on it Thursday morning before going into work and again Saturday.

budnikguy · 03-18-2014, 09:17 AM

I do, and the a pillar can be cut to your specifications.
"Windshield Frame $400 plus shipping"

Quote:

Originally Posted by BLUE THUNDER

Do you still have the windshield frame? If so, how much?

doo142 · 03-18-2014, 01:05 PM

Thanks for the up date, no worry here .

Coda O'Dell · 03-19-2014, 04:58 PM

Can I get the wiper transmission arm clip and if so how much to 74066.

budnikguy · 03-20-2014, 10:26 PM

This right?! Sorry only pic I had shows two of them...

Quote:

Originally Posted by Coda O'Dell

Can I get the wiper transmission arm clip and if so how much to 74066.

1972 Jimmy · 03-24-2014, 07:00 AM

Quote:

Originally Posted by budnikguy

Please hang in there everyone, i just removed it from my trailer and began to start un bolting..Will take a little bit of time. I will be able to spend a few hours on it Thursday morning before going into work and again Saturday.

Adam,
Good morning! Any luck on part removal over the weekend?
Thanks,
Eric (1972 Jimmy)

JJH Jimmy · 03-24-2014, 11:38 AM

What is the deal on the mirror? Have you shipped it out yet? Can i get some tracking info?

Thanks

Coda O'Dell · 03-24-2014, 04:29 PM

Quote:

Originally Posted by budnikguy

This right?! Sorry only pic I had shows two of them...

Ya that's the one. Can you just mail it in the Mail for me? how much for one?

**JimH2828** · 03-30-2014, 04:24 PM

Any progress with tearing her down?

1) Rear side panel mount brackets
- center top hat bracket type (there should be 6x)
- floor and tailgate L bracket type (there should be 6x)
2) Firewall to rear wire harness
3) Rear bench rear hold down bracket and bolt

Thanks
Jim

ikesboy · 04-04-2014, 08:01 AM

What's the best you could do on the windshield frame/ I'm in Va. 20132?

k5build · 04-06-2014, 12:20 AM

also interested in the windshield frame if it doesn't work out with ikesboy. I'm in Fresno, could possibly drive to you to pick it up

budnikguy · 04-06-2014, 09:31 AM

I am out of town till Tuesday all, I will be able to get back to things ..Ty for the patience .

budnikguy · 04-06-2014, 09:32 AM

$5 in an envelope for ya...

Quote:

Originally Posted by Coda O'Dell

Ya that's the one. Can you just mail it in the Mail for me? how much for one?

budnikguy · 04-06-2014, 09:34 AM

Windhield frame is $400 firm plus shipping and can be cut to need on the A pillar.

Dale99 · 04-09-2014, 10:42 PM

I'm a little late in on the party here. Attached is a piece of metal I would like to get if your cutting it up. Would need shipped to 72120 home or 72116 business.

ikesboy · 04-10-2014, 08:04 AM

i'll have to pass for $400. thanks tho

doo142 · 04-19-2014, 05:45 PM

Bump

MrGoodpliers · 04-23-2014, 09:48 AM

How about the rocker boxes? Rocker box end caps?

budnikguy · 04-23-2014, 05:42 PM

Getting ready for cuts...as it is stripped down to that point...

budnikguy · 04-23-2014, 05:48 PM

pics of wheel wells removed, have been posted, lmk. Thanks Adam

Quote:

Originally Posted by doo142

Interested in wheel wells let me know price, thanks

budnikguy · 04-23-2014, 05:57 PM

These are all removed, I will add a picture or 2 tomorrow for you!

Thanks
Adam

Quote:

Originally Posted by JimH2828

Interested in the below items if the price is right, shipped to GA 30005

1) Rear side panel mount brackets
- center top hat type
- floor and tailgate L type - I think they are spot welded
2) firewall to rear wire harness
- any cuts or breaks?
3) Rear bench rear hold down bracket and bolt

Thanks
Jim

budnikguy · 04-23-2014, 05:59 PM

I have posted more pics of the floor, I would need $80 shipped for your cut.lmk

Thanks
Adam

Quote:

Originally Posted by IronCanine

Interested in the last 4 or 5 inches of the bed/deck leading up to the tailgate.

Thanks, Brad

budnikguy · 04-23-2014, 06:03 PM

Might be able to ship reasonably via Greyhound...I have cuts already for another member that include 5" all the way around the wheel well openings both sides. LMK if this is still an option with considering what I stated above.

Thanks
Adam

Quote:

Originally Posted by IronCanine

On second thought, if shipping is doable, I really need to get the back half of the rear deck. So I'll revise my request to: interested in the deck mid wheel well to tailgate shipped to 30622 vs. just the last 5 inches leading to the tailgate.

Thanks,

Brad

doo142 · 04-23-2014, 09:45 PM

I'll take the wheel wells, if you can do the cowl vent cut I would like to combine shipping. To make that cowl cutler simple I would take the whole corner of the cab, let me know, thanks referring to passenger side

rkgjl · 04-23-2014, 11:17 PM

Hi just wondering if you have the windshield washer spray nozzles would be interested in them

03-18-2014, 09:14 AM	#51
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72 Blazer part out Please hang in there everyone, i just removed it from my trailer and began to start un bolting..Will take a little bit of time. I will be able to spend a few hours on it Thursday morning before going into work and again Saturday.

03-18-2014, 01:05 PM	#53
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: 72 Blazer part out Thanks for the up date, no worry here .

03-19-2014, 04:58 PM	#54
Coda O'Dell Registered User Join Date: Mar 2008 Location: Sapulpa, Oklahoma Posts: 70	Re: 72 Blazer part out Can I get the wiper transmission arm clip and if so how much to 74066.

03-24-2014, 11:38 AM	#57
JJH Jimmy Registered User Join Date: Jun 2012 Location: Schoolcraft, Michigan Posts: 928	Re: 72 Blazer part out What is the deal on the mirror? Have you shipped it out yet? Can i get some tracking info? Thanks __________________ 1972 GMC Jimmy 4x4 LS Swap 1985 Chevy K20 1994 GMC Yukon 2021 GMC 2500HD Duramax AT4 My "It's a Jimmy Thing" Build http://67-72chevytrucks.com/vboard/s...d.php?t=583528 Budget Build 1985 K20 http://67-72chevytrucks.com/vboard/s...d.php?t=801565

03-30-2014, 04:24 PM	#59
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 72 Blazer part out Any progress with tearing her down? 1) Rear side panel mount brackets - center top hat bracket type (there should be 6x) - floor and tailgate L bracket type (there should be 6x) 2) Firewall to rear wire harness 3) Rear bench rear hold down bracket and bolt Thanks Jim

04-04-2014, 08:01 AM	#60
ikesboy Registered User Join Date: Mar 2014 Location: Winchester, Va Posts: 27	Re: 72 Blazer part out What's the best you could do on the windshield frame/ I'm in Va. 20132?

04-06-2014, 12:20 AM	#61
k5build Registered User Join Date: Apr 2014 Location: Fresno, Ca Posts: 1	Re: 72 Blazer part out also interested in the windshield frame if it doesn't work out with ikesboy. I'm in Fresno, could possibly drive to you to pick it up

04-06-2014, 09:31 AM	#62
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72 Blazer part out I am out of town till Tuesday all, I will be able to get back to things ..Ty for the patience .

04-06-2014, 09:34 AM	#64
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72 Blazer part out Windhield frame is $400 firm plus shipping and can be cut to need on the A pillar.

04-09-2014, 10:42 PM	#65
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: 72 Blazer part out I'm a little late in on the party here. Attached is a piece of metal I would like to get if your cutting it up. Would need shipped to 72120 home or 72116 business. Attached Images __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

04-10-2014, 08:04 AM	#66
ikesboy Registered User Join Date: Mar 2014 Location: Winchester, Va Posts: 27	Re: 72 Blazer part out i'll have to pass for $400. thanks tho

04-19-2014, 05:45 PM	#67
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: 72 Blazer part out Bump

04-23-2014, 09:48 AM	#68
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: 72 Blazer part out How about the rocker boxes? Rocker box end caps? __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

04-23-2014, 05:42 PM	#69
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 72 Blazer part out Getting ready for cuts...as it is stripped down to that point...

04-23-2014, 09:45 PM	#74
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: 72 Blazer part out I'll take the wheel wells, if you can do the cowl vent cut I would like to combine shipping. To make that cowl cutler simple I would take the whole corner of the cab, let me know, thanks referring to passenger side Last edited by doo142; 04-23-2014 at 09:50 PM. Reason: Forgot to mention



Register or Log In To remove these advertisements.

04-23-2014, 11:17 PM	#75
rkgjl Registered User Join Date: Nov 2013 Location: Arrroyo Grande California Posts: 24	Re: 72 Blazer part out Hi just wondering if you have the windshield washer spray nozzles would be interested in them

Register or Log In To remove these advertisements.