KS Parting: 157" 69 GMC 1 Ton with buckets - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedRoad · 04-07-2015, 11:18 PM

Please take pics of the steering wheel.

Thanks

RedRoad · 04-08-2015, 12:25 AM

thanks for the effort, its a lot worse off than I hoped. Ill have to pass.

Oddfire · 04-08-2015, 03:09 AM

Mike P-lights look good. How much for those w/pigtails + mounting screws shipped to 22630? Jamie

**1968k20** · 04-08-2015, 05:58 AM

Just the radio and knobs

mgkgmc · 04-08-2015, 09:40 AM

How's the white ashtray in the truck?

**Cash3481** · 04-08-2015, 07:52 PM

Quote:

Originally Posted by mgkgmc

How's the white ashtray in the truck?

Here's your pic!

OLDTRUCKHAULER · 04-08-2015, 01:23 PM

Mike, there is a machined pad at the front of the pass. cyl. head. The engine displacement
and serial number is stamped on it, displacement is first set of numbers.
Price is good for me. Shipping to 28401?
And $ for back wheels? Don't need the fronts if they are snap rings.
May be able to make a roadtrip out of this vs shipping everything, (therapy for me).

mattgoat · 04-08-2015, 02:24 PM

Yes, I would like the whole assembly. From where it clips into under dash harness to the metal cage part that attaches to the heater control. My metal part that holds bulb and attaches to the heater control is broken.

Matt

**Cash3481** · 04-08-2015, 02:49 PM

Quote:

Originally Posted by OLDTRUCKHAULER

Mike, there is a machined pad at the front of the pass. cyl. head. The engine displacement
and serial number is stamped on it, displacement is first set of numbers.
Price is good for me. Shipping to 28401?
And $ for back wheels? Don't need the fronts if they are snap rings.
May be able to make a roadtrip out of this vs shipping everything, (therapy for me).

It will take a few days to get this palletized and in to a freight co. Do you need the tranny and motor or just the motor. I have a co that does crates but not sure on the price. Ill find out.

Quote:

Originally Posted by mattgoat

Yes, I would like the whole assembly. From where it clips into under dash harness to the metal cage part that attaches to the heater control. My metal part that holds bulb and attaches to the heater control is broken.
Matt

Matt,
Ill get you a picture of what I can do without.

**Cash3481** · 04-08-2015, 10:42 PM

Quote:

Originally Posted by oldtruckhauler

mike, there is a machined pad at the front of the pass. Cyl. Head. The engine displacement
and serial number is stamped on it, displacement is first set of numbers.
Price is good for me. Shipping to 28401?
And $ for back wheels? Don't need the fronts if they are snap rings.
May be able to make a roadtrip out of this vs shipping everything, (therapy for me).

305e523601

jjzepplin · 04-09-2015, 05:23 AM

I need an ashtray and bracket for a 70 Chevy. No specific color. I think it screws to the dash? 33578

hanly2 · 04-08-2015, 04:16 PM

I need the clutch fork wedge and the spring that goes to the frame. Also need a wheel hub if you decide to part the rear. I think I have a h072, may even need the brake shoes I cant find them online either.

OLDTRUCKHAULER · 04-08-2015, 05:12 PM

Mike, both eng/trans. $200.00 and 1 piece rear wheels for? Let me know, I'll load my paypal account.

Mike OLDTRUCKHAULER

Oddfire · 04-08-2015, 07:20 PM

Mike $35 shipped sounds good. I'll send payment tomorrow after my check posts. Thanks for the great deal. Jamie

**Cash3481** · 04-08-2015, 07:28 PM

Quote:

Originally Posted by hanly2

I need the clutch fork wedge and the spring that goes to the frame. Also need a wheel hub if you decide to part the rear. I think I have a h072, may even need the brake shoes I cant find them online either.

I think dieselwrencher is buyng the rolling chassis... I'll let you know!

Quote:

Originally Posted by OLDTRUCKHAULER

Mike, both eng/trans. $200.00 and 1 piece rear wheels for? Let me know, I'll load my paypal account.
Mike OLDTRUCKHAULER

I'll get the rough estimate tomorrow around lunch.

Quote:

Originally Posted by Oddfire

Mike $35 shipped sounds good. I'll send payment tomorrow after my check posts. Thanks for the great deal. Jamie

Thank you sir.

**Cash3481** · 04-08-2015, 07:56 PM

Quote:

Originally Posted by OLDTRUCKHAULER

Mike, both eng/trans. $200.00 and 1 piece rear wheels for? Let me know, I'll load my paypal account.

Mike OLDTRUCKHAULER

Checked the wheels and they are ALL split rims. I didn't realize they are turned inside out on the dually rears. Sorry!

OLDTRUCKHAULER · 04-08-2015, 09:45 PM

Mike, Bummer on the DRW's. I'll stay with the eng/trans. Did you look at the
#'s stamped in front of pass head for displacement?

OLDTRUCKHAULER

**1968k20** · 04-09-2015, 06:08 AM

Price plus shipping on radio? If you don't find the knob, that's ok.

**Cash3481** · 04-09-2015, 06:46 AM

Quote:

Originally Posted by jjzepplin

I need an ashtray and bracket for a 70 Chevy. No specific color. I think it screws to the dash? 33578

$15 shipped

Quote:

Originally Posted by 1968k20

Price plus shipping on radio? If you don't find the knob, that's ok.

radio $15
Cups and knobs $5
Shipping $12
Total $32

Oddfire · 04-09-2015, 05:01 PM

Mike I need your paypal addie. Jamie

**Cash3481** · 04-09-2015, 09:49 PM

Quote:

Originally Posted by mgkgmc

I'll take it.

very well, thanks.

Quote:

Originally Posted by 1968k20

Payment sent for radio!

Thank you sir!

Quote:

Originally Posted by jakewalter

Is the front sway bar for sale?
Thanks so much,
Jake

Sorry, this didn't have one when I got it.

Quote:

Originally Posted by Oddfire

Mike I need your paypal addie. Jamie

Pm incoming.

**Cash3481** · 04-09-2015, 10:11 PM

Picture for jjzeplin!
This is a regular one.
If you need the one with ball bearings just let me know.

jjzepplin · 04-10-2015, 03:13 AM

Quote:

Originally Posted by Cash3481

Picture for jjzeplin!
This is a regular one.
If you need the one with ball bearings just let me know.

That will work just fine but I need the bracket that this slides into as well. Does this come with that?

**1968k20** · 04-09-2015, 10:48 AM

I will take radio, cups and knobs please! Sending pm now

mgkgmc · 04-09-2015, 11:23 AM

I'll take it.

04-07-2015, 11:18 PM	#1
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 928	Re: Parting: 157" 69 GMC 1 Ton with buckets Please take pics of the steering wheel. Thanks

04-08-2015, 12:25 AM	#2
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 928	Re: Parting: 157" 69 GMC 1 Ton with buckets thanks for the effort, its a lot worse off than I hoped. Ill have to pass.

04-08-2015, 03:09 AM	#3
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting: 157" 69 GMC 1 Ton with buckets Mike P-lights look good. How much for those w/pigtails + mounting screws shipped to 22630? Jamie

04-08-2015, 05:58 AM	#4
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: Parting: 157" 69 GMC 1 Ton with buckets Just the radio and knobs Last edited by 1968k20; 04-08-2015 at 06:04 AM. Reason: Had asked same question twice

04-08-2015, 09:40 AM	#5
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,355	Re: Parting: 157" 69 GMC 1 Ton with buckets How's the white ashtray in the truck? __________________ 1970 GMC 1500 stepside 1972 GMC Jimmy Custom 2004 Chevy Colorado 1989 Swb Silverado 1972 Aj's Stormer

04-08-2015, 01:23 PM	#7
OLDTRUCKHAULER Registered User Join Date: Mar 2015 Location: Wilmington, NC Posts: 39	Re: Parting: 157" 69 GMC 1 Ton with buckets Mike, there is a machined pad at the front of the pass. cyl. head. The engine displacement and serial number is stamped on it, displacement is first set of numbers. Price is good for me. Shipping to 28401? And $ for back wheels? Don't need the fronts if they are snap rings. May be able to make a roadtrip out of this vs shipping everything, (therapy for me).

04-08-2015, 02:24 PM	#8
mattgoat Registered User Join Date: Oct 2009 Location: south san francisco CA Posts: 23	Re: Parting: 157" 69 GMC 1 Ton with buckets Yes, I would like the whole assembly. From where it clips into under dash harness to the metal cage part that attaches to the heater control. My metal part that holds bulb and attaches to the heater control is broken. Matt

04-09-2015, 05:23 AM	#11
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Parting: 157" 69 GMC 1 Ton with buckets I need an ashtray and bracket for a 70 Chevy. No specific color. I think it screws to the dash? 33578 __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

04-08-2015, 04:16 PM	#12
hanly2 Registered User Join Date: Mar 2014 Location: Gibbstown, NJ Posts: 176	Re: Parting: 157" 69 GMC 1 Ton with buckets I need the clutch fork wedge and the spring that goes to the frame. Also need a wheel hub if you decide to part the rear. I think I have a h072, may even need the brake shoes I cant find them online either.

04-08-2015, 05:12 PM	#13
OLDTRUCKHAULER Registered User Join Date: Mar 2015 Location: Wilmington, NC Posts: 39	Re: Parting: 157" 69 GMC 1 Ton with buckets Mike, both eng/trans. $200.00 and 1 piece rear wheels for? Let me know, I'll load my paypal account. Mike OLDTRUCKHAULER

04-08-2015, 07:20 PM	#14
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting: 157" 69 GMC 1 Ton with buckets Mike $35 shipped sounds good. I'll send payment tomorrow after my check posts. Thanks for the great deal. Jamie

04-08-2015, 09:45 PM	#17
OLDTRUCKHAULER Registered User Join Date: Mar 2015 Location: Wilmington, NC Posts: 39	Re: Parting: 157" 69 GMC 1 Ton with buckets Mike, Bummer on the DRW's. I'll stay with the eng/trans. Did you look at the #'s stamped in front of pass head for displacement? OLDTRUCKHAULER

04-09-2015, 06:08 AM	#18
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: Parting: 157" 69 GMC 1 Ton with buckets Price plus shipping on radio? If you don't find the knob, that's ok.

04-09-2015, 05:01 PM	#20
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting: 157" 69 GMC 1 Ton with buckets Mike I need your paypal addie. Jamie

04-09-2015, 10:11 PM	#22
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting: 157" 69 GMC 1 Ton with buckets Picture for jjzeplin! This is a regular one. If you need the one with ball bearings just let me know. Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!



Register or Log In To remove these advertisements.

04-09-2015, 10:48 AM	#24
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: Parting: 157" 69 GMC 1 Ton with buckets I will take radio, cups and knobs please! Sending pm now

04-09-2015, 11:23 AM	#25
mgkgmc Registered User Join Date: Dec 2007 Location: Glendale Arizona Posts: 1,355	Re: Parting: 157" 69 GMC 1 Ton with buckets I'll take it. __________________ 1970 GMC 1500 stepside 1972 GMC Jimmy Custom 2004 Chevy Colorado 1989 Swb Silverado 1972 Aj's Stormer

Register or Log In To remove these advertisements.