The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board > 1969 - 1972 Blazers and Jimmys Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-25-2021, 05:27 PM   #51
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

I've been slammed busy at work and was out of the state for work for a bit. Moving along but, still slower than I would like. I'm almost ready to install inner fenders, core support, grille, bumpers, and hood. Doing a few final checks to make sure I have everything buttoned up on the engine before I install those parts. I wanted to do some day 2 hickey items like differential covers etc. but, I may hold off until the truck is done before spending money on those. I found some subdued differential covers, transmission pan, and flywheel cover I've liked using on other trucks. I also did a new engine compartment wiring harness. Bluetooth radio is in. Front carpet, console, sill plates etc. Driveshafts are in. New heater core and all the HVAC tubing. I had the emissions lines in the back remade by Williams Oil Filter in Tacoma, WA. Hood hinges rebuilt by Wilson Antique Auto Parts. Tilt column, console, and instrument cluster rebuilt by Randy here in Tacoma. Used the van shifter arm as it fits better with the 15" wheel. Exhaust manifolds were coated by Performance Coatings in Auburn, WA. Lots of other little details I'm forgetting. It is scary how close I'm getting. I always seem to drag my feet at the end because I enjoy the building aspect most.
Attached Images
     
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 12-25-2021, 05:35 PM   #52
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

The door panels are original. I was able to clean them up with SEM soap and no need to dye them. I got my upholstery in from SMS. I ordered the front and rear covers back in the spring and got them last month. Need to get those installed once I get my seat foam in from ACI. It is a challenger building anything with the delays right now.
Attached Images
     
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 12-25-2021, 05:42 PM   #53
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

Some more pictures
Attached Images
     
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 12-25-2021, 05:43 PM   #54
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

some more pictures
Attached Images
   
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 12-25-2021, 06:05 PM   #55
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: 1972 Highlander (Forum Truck)

Quote:
Originally Posted by HeloCrewChief View Post
some more pictures
Looks great!
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 01-15-2022, 08:46 PM   #56
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Quote:
Originally Posted by Ol Blue K20 View Post
Looks great!
Thanks Dale. Your Dually went to a good home. I let it go to another truck guy. He flew in and drove it home to Texas. Even picked up a C10 project along the way and towed it home. Once I calculated paint and all the other things I wanted to do to it, I figured it was best to send it down the road to a guy that had the time. Too many projects on my plate.
Posted via Mobile Device
Attached Images
     
HeloCrewChief is offline   Reply With Quote
Old 01-15-2022, 08:52 PM   #57
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Got the roll bar in. It’s a motor city K5 piece and I’m happy with the look and quality. I was shorted 4 mounting bolts but, a quick run to the hardware store will solve that. The CST rear panels are in. Wasn’t too bad locating all the brackets back into position since the holes had to be located and drilled since the reproduction bedsides/ floor don’t have them. Next challenge will be the seat mounting and spare tire carrier. I also painted the dash top as the windshield is going in soon.
Posted via Mobile Device
Attached Images
  
HeloCrewChief is offline   Reply With Quote
Old 01-15-2022, 10:01 PM   #58
Orange71shorty
Senior Member
 
Join Date: Feb 2009
Location: Helena, Montana
Posts: 617
Re: 1972 Highlander (Forum Truck)

Quote:
Originally Posted by HeloCrewChief View Post
Got the roll bar in. It’s a motor city K5 piece and I’m happy with the look and quality. I was shorted 4 mounting bolts but, a quick run to the hardware store will solve that. The CST rear panels are in. Wasn’t too bad locating all the brackets back into position since the holes had to be located and drilled since the reproduction bedsides/ floor don’t have them. Next challenge will be the seat mounting and spare tire carrier. I also painted the dash top as the windshield is going in soon.
Posted via Mobile Device
Where did you source the rear CST panels, and are you happy with the quality?
Orange71shorty is online now   Reply With Quote
Old 01-15-2022, 10:12 PM   #59
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

I think I got them from Brothers a while back. I believe the brand is PUI. The fit was about as good as reproduction parts fit. They’re much puffier than original but, most reproduction door panels I’ve used are puffier than originals. I've used Chevelle, Nova, and Camaro PUI door panels and they are all overstuffed. I think Legendary interiors makes the nicest stuff but, not sure if they make the CST panels. Not many options though as finding originals is not going to happen.
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins

Last edited by HeloCrewChief; 01-15-2022 at 11:14 PM.
HeloCrewChief is offline   Reply With Quote
Old 01-15-2022, 10:23 PM   #60
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: 1972 Highlander (Forum Truck)

Quote:
Originally Posted by HeloCrewChief View Post
Got the roll bar in. It’s a motor city K5 piece and I’m happy with the look and quality. I was shorted 4 mounting bolts but, a quick run to the hardware store will solve that. The CST rear panels are in. Wasn’t too bad locating all the brackets back into position since the holes had to be located and drilled since the reproduction bedsides/ floor don’t have them. Next challenge will be the seat mounting and spare tire carrier. I also painted the dash top as the windshield is going in soon.
Posted via Mobile Device
Thanks for letting me know. It deserves to be loved!
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 01-15-2022, 11:59 PM   #61
Orange71shorty
Senior Member
 
Join Date: Feb 2009
Location: Helena, Montana
Posts: 617
Re: 1972 Highlander (Forum Truck)

Quote:
Originally Posted by HeloCrewChief View Post
I think I got them from Brothers a while back. I believe the brand is PUI. The fit was about as good as reproduction parts fit. They’re much puffier than original but, most reproduction door panels I’ve used are puffier than originals. I've used Chevelle, Nova, and Camaro PUI door panels and they are all overstuffed. I think Legendary interiors makes the nicest stuff but, not sure if they make the CST panels. Not many options though as finding originals is not going to happen.
Thanks, the rig is looking awesome
Orange71shorty is online now   Reply With Quote
Old 01-18-2022, 05:46 PM   #62
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

Condenser and some of the A/C hoses and lines are in. Also the windshield and wipers are on.
Attached Images
 
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 01-18-2022, 06:10 PM   #63
IronCanine
I'm trying....
 
IronCanine's Avatar
 
Join Date: Oct 2013
Location: Athens, GA
Posts: 2,753
Re: 1972 Highlander (Forum Truck)

Looking good! Love the progress, love the build (and love the shop).
IronCanine is offline   Reply With Quote
Old 01-18-2022, 10:05 PM   #64
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: 1972 Highlander (Forum Truck)

Quote:
Originally Posted by IronCanine View Post
Looking good! Love the progress, love the build (and love the shop).
I agree with all points!
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 01-24-2022, 12:44 PM   #65
BigBird05
Registered User
 
Join Date: Aug 2019
Location: Cheraw
Posts: 1,300
Re: 1972 Highlander (Forum Truck)

In all of your photos do you have one that shows the bottom ( drain ) part of the A/C housing?
BigBird05 is offline   Reply With Quote
Old 01-24-2022, 04:38 PM   #66
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

Quote:
Originally Posted by BigBird05 View Post
In all of your photos do you have one that shows the bottom ( drain ) part of the A/C housing?
BigBird,

This is the only picture I could find. Not the best.
Attached Images
 
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 01-24-2022, 04:40 PM   #67
BigBird05
Registered User
 
Join Date: Aug 2019
Location: Cheraw
Posts: 1,300
Re: 1972 Highlander (Forum Truck)

Thanks
BigBird05 is offline   Reply With Quote
Old 01-29-2022, 12:39 AM   #68
Bmdully
Registered User
 
Bmdully's Avatar
 
Join Date: Dec 2013
Location: Seattle, wa
Posts: 31
Re: 1972 Highlander (Forum Truck)

Gotta asked Oliver, where did you find hose clamps to match the paint? Looking at the picture of the fuel tank.
Bmdully is offline   Reply With Quote
Old 02-02-2022, 02:16 PM   #69
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

Quote:
Originally Posted by Bmdully View Post
Gotta asked Oliver, where did you find hose clamps to match the paint? Looking at the picture of the fuel tank.
Brandon, not too sue what you are seeing. Guessing it must be some sort of reflection. The gas tank straps are originals that I powder coated. Clamps are just regular worm gear style from NAPA. Hope all is well. I have a buddy building a 70' K10 Suburban now. Sure do miss that K20. It drove so well. Have a feeling I wont love how squirly these Blazers are.
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 02-02-2022, 02:18 PM   #70
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

Brandon,

Just looked back through my pictures. I see what you are talking about now. I got those clamps at Mclendons in their hardware section. Just a weird OCD thing but, trying to match up all the clamps and clips in the correct colors they were originally. I've had to paint some to match as well.
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 02-02-2022, 08:04 PM   #71
YellowK5
Active Member
 
Join Date: Jun 2021
Location: Rancho Cucamonga California
Posts: 170
Re: 1972 Highlander (Forum Truck)

Really nice looking Blazer..great work
YellowK5 is offline   Reply With Quote
Old 02-04-2022, 01:07 AM   #72
Bmdully
Registered User
 
Bmdully's Avatar
 
Join Date: Dec 2013
Location: Seattle, wa
Posts: 31
Re: 1972 Highlander (Forum Truck)

Well it’s looking great buddy. We need to organize some WA cruise when she’s finished.
Bmdully is offline   Reply With Quote
Old 04-13-2022, 11:12 AM   #73
HeloCrewChief
Senior Member
 
HeloCrewChief's Avatar
 
Join Date: Aug 2010
Location: North Alabama
Posts: 1,056
Re: 1972 Highlander (Forum Truck)

Back seat, carpet, spare tire in. Just need to source a spare tire bolt.
Attached Images
    
__________________
1970 C10 to K20 conversion
1974 GMC Jimmy
1968 50th Anniversary Short Bed
1968 Chevelle
1964 Comet Caliente
1990 W250 Cummins
HeloCrewChief is offline   Reply With Quote
Old 04-13-2022, 01:17 PM   #74
DeadheadNM
Carpe manana

 
DeadheadNM's Avatar
 
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,446
Re: 1972 Highlander (Forum Truck)

Boom! Nice CB too...
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547
1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308

Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland
DeadheadNM is offline   Reply With Quote
Old 04-13-2022, 09:41 PM   #75
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: 1972 Highlander (Forum Truck)

It's looking great Oliver! I love it!
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:52 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com