Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-04-2017, 03:43 PM | #51 | |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Quote:
|
|
04-04-2017, 04:03 PM | #52 |
Registered User
Join Date: Mar 2015
Location: Utah
Posts: 750
|
Re: Complete build change. Lifted 2wd
It definitely is! And I know for a fact that buying that plate will save on install time, at least 3 hours of my install time was making that plate, and doing little modifications so it would fit like I wanted it to.
__________________
72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab |
04-04-2017, 04:05 PM | #53 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Good to hear, thats exactly why i bought it. figured by the time i make it im loosing money and time lol. any tips would be appreciated. Did you use the HP 4060 lights that were mentioned in that thread?
|
04-04-2017, 04:44 PM | #54 |
Registered User
Join Date: Mar 2015
Location: Utah
Posts: 750
|
Re: Complete build change. Lifted 2wd
yes I did, and they go in with minimal modifications, just cut 2 of the 4 tabs off, and trim the other 2 and they go right on. One tip that will save you a lot of time, would be on the trip reset, instead of taking a screw to lengthen the trip reset button, just build up the "ramp" that moves the metal rods that reset the trip with some epoxy, so it moves those rods sooner.
__________________
72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab |
04-04-2017, 04:49 PM | #55 | |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Quote:
|
|
04-04-2017, 10:09 PM | #56 |
Registered User
Join Date: Mar 2015
Location: Utah
Posts: 750
|
Re: Complete build change. Lifted 2wd
I used 8. I agree it will be nice having a trip!
__________________
72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab |
04-10-2017, 12:05 PM | #57 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Wrapped up all the brake lines we could this weekend. Made a tubing straightener from some wheels from Lowe's. worked decent.
We Decided to run the proportioning valve on the frame rail rather than off the master cylinder. My brother had these nice little stainless clamps that make the lines look really nice and uniform. |
04-10-2017, 12:13 PM | #58 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Pulled the front clip as a complete piece
|
04-10-2017, 12:15 PM | #59 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Set the front clip on the new frame to see how it was gonna look.
Pretty happy with the height at this point. |
04-10-2017, 05:19 PM | #60 |
Active Member
Join Date: Sep 2013
Location: Elk Grove Village IL
Posts: 152
|
Re: Complete build change. Lifted 2wd
I can't wait to see this done! Bad ass
__________________
1972 GMC C2500 Tow Rig project 1972 C10 Air Bag project 1967 C10 Drag Truck project 1967 GMC Patina Special project 1968 C10 I have no clue what to do with project 1969 GMC C6500 I wish I had more money project 1986 K10 I have too many damn projects |
04-10-2017, 05:59 PM | #61 |
Registered User
Join Date: Oct 2015
Location: Peoria, AZ
Posts: 67
|
Re: Complete build change. Lifted 2wd
Awesome project!!!
|
04-10-2017, 06:21 PM | #62 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
|
04-12-2017, 01:56 PM | #63 |
Active Member
Join Date: Sep 2013
Location: Elk Grove Village IL
Posts: 152
|
Re: Complete build change. Lifted 2wd
What's the height from the bottom of the fender to the ground?
__________________
1972 GMC C2500 Tow Rig project 1972 C10 Air Bag project 1967 C10 Drag Truck project 1967 GMC Patina Special project 1968 C10 I have no clue what to do with project 1969 GMC C6500 I wish I had more money project 1986 K10 I have too many damn projects |
04-12-2017, 06:12 PM | #64 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
|
04-13-2017, 04:22 AM | #65 |
Senior Member
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 4,220
|
Re: Complete build change. Lifted 2wd
Looking good, excellent job on the brake lines.
__________________
Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant |
04-13-2017, 01:48 PM | #66 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
|
05-08-2017, 02:47 PM | #67 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Well this weekend started out with a disappointment. We had our hopes set on getting the motor ready to go in. I ordered an AC-Delco transmission filter/gasket and had a corvette shift solenoid for the 4l60E thats goin. Everything was good until we pulled the pan. There was a Ton of what looked like clutch material in the pan. I knew this was a possibility considering I got the motor from the junkyard but i was optimistic. So now we either have to try our hand at rebuilding it or have it done. We've never done one before so any tips are appreciated.
This is after we wiped most the junk out. the whole pan was covered holding up the whole project now |
05-08-2017, 03:00 PM | #68 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Since the tranmission is now gonna need some attention we finished up the brake lines. For anyone doing this style lift you'll quickly find that routing the rubber hoses for the caliper is a bit tricky. We went to the front of the control arm which required the hose shape to be slightly modified.
The hose still has slack at full droop and is out of the way of any steering components The hoses ran through an existing hole in the frame and meets up nicely with the brake lines we made a while ago. using a horse shoe clip to retain them. The rear end brake line also completed and has plenty of slack. We figured out a way to use the stock 2001 silverado brake cables in the factory brackets for the 69 so that should be an easy hook up also. The frame is basically done. if only the transmission wasn't an issue, it'd be time to really start the swap! |
05-10-2017, 12:43 AM | #69 |
Registered User
Join Date: Mar 2015
Location: Utah
Posts: 750
|
Re: Complete build change. Lifted 2wd
when you wrap up the park brake cable setup, make sure you post pics. I hope to be able to do something similar with the rear end of my truck one day.
__________________
72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab |
05-11-2017, 01:40 PM | #70 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
|
05-11-2017, 08:16 PM | #71 |
Registered User
Join Date: Apr 2010
Location: So Cal
Posts: 1,467
|
Re: Complete build change. Lifted 2wd
On your first page you had a picture of this reinforcement bracket you found on the later front end. I found the same reinforcement on the '76 C30 SRW that I took the disc brake parts from for my '67. I believe they added the reinforcement, because the brackets on the outside of the frame that the upper A-arm bolts to is a lighter weight pressed steel piece, rather than the former Forged Steel bracket, riveted to the cross member.
I used my '67 cross member with the Forged brackets and added the inside reinforcement brackets as well. I used the six cylinder coil springs, but everything else including the brake lines and forward mounted Combination Valve is from the '76. I realize that you are well past the cross member, but the original, later Combination Valve mounting on the small cross member, under the radiator might be worth considering. It is hardly noticeable down there and there is already one usable mounting hole. Later you will need easy access to it, to hold the Metering pin in for bleeding. Just a thought.
__________________
'67 GMC 2500, 292, 4spd, AC |
05-11-2017, 08:58 PM | #72 | |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Quote:
as far as mounting the prop valve down there, we had considered it but ended up mounting it just behind where the motor would sit because I want the lines to go right up as close to the firewall as possible. hopefully keep it clean. Im hoping, like the front mount that it too is easy to get to. I appreciate the suggestion though. |
|
05-11-2017, 09:10 PM | #73 |
6>8 Plugless........
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
|
Re: Complete build change. Lifted 2wd
Nice work on your new frame. Sorry to see about the trans. Could you find a decent used 4L60E to keep you going for now?
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
05-11-2017, 09:15 PM | #74 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Thank you sir! For now as suggested by a few members im going to try and run it. worst case, im out fluid. . best case it works. lol. but yes if it comes down to it not working, I will look for a solid used one I think.
|
05-15-2017, 12:16 PM | #75 |
Registered User
Join Date: Dec 2007
Location: Riverside, Ca
Posts: 407
|
Re: Complete build change. Lifted 2wd
Well this weekend was a ton of work. Started by getting the cab off the bagged frame. was a bit sketchy because we had to do it in the dirt but it was surprisingly sturdy.
|
Bookmarks |
Tags |
2wd lift, 67-72 chevy, lifted, lifted 2wd, ls swap |
|
|