MO Parting out 69 C10,,, what you need??? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 02-16-2018, 01:32 PM

Quote:

Originally Posted by 69Tom

Do you still have the power steering box and pump? I'm interested.

Gearbox is still there, the pump is gone. Thanks, Fred.

desertnick69 · 02-16-2018, 05:39 PM

Quote:

Originally Posted by 69Tom

Do you still have the power steering box and pump? I'm interested.

Not to jump in on his post but I have a box and pump here in Phoenix

69Tom · 02-16-2018, 05:41 PM

Quote:

Originally Posted by desertnick69

Not to jump in on his post but I have a box and pump here in Phoenix

PM sent.

**FL71C10** · 02-18-2018, 08:34 PM

Quote:

Originally Posted by specialtyretail

Sorry for the crappy pic. $32.00 shipped. Thanks, Fred.

If you take the emergency brake pedal out and can get a decent picture of it, I might be interested. It is just hard to see the condition in that picture.

Thanks!

C1ph3r · 02-18-2018, 09:57 PM

What kind of shape is the PS box? I guess it should work on a 70? And last, shipped to 28027.

Thanks,
A.W.

**specialtyretail** · 02-19-2018, 10:37 AM

Quote:

Originally Posted by C1ph3r

What kind of shape is the PS box? I guess it should work on a 70? And last, shipped to 28027.

Thanks,
A.W.

Looks pretty clean. $85.00 shipped. Thanks, Fred.

Firefighterkk · 02-19-2018, 11:30 AM

Needing a clutch pedal for my 68. Appears this truck is an auto, but have noticed you have made several other posts. Happen to have one?

C1ph3r · 02-19-2018, 11:57 AM

Quote:

Originally Posted by specialtyretail

Looks pretty clean. $85.00 shipped. Thanks, Fred.

Thanks for the quick response Fred. If you still have it next month I will take it. Truck budget is already exhausted for this month.

Gus350 · 02-19-2018, 12:51 PM

Fred is this a SWB frame if so what kind of shape is it and do you want to sell it. Nice running into you at the swap meet Sunday to.

Kevin

Lumaestas · 02-19-2018, 12:59 PM

is it a V8? you have the power steering brackets?
Posted via Mobile Device

**specialtyretail** · 02-19-2018, 06:37 PM

Quote:

Originally Posted by Firefighterkk

Needing a clutch pedal for my 68. Appears this truck is an auto, but have noticed you have made several other posts. Happen to have one?

I have a 68 that is a manual. $60.00 shipped for the clutch pedal assembly. Thanks, Fred.

**specialtyretail** · 02-19-2018, 06:40 PM

Quote:

Originally Posted by Gus350

Fred is this a SWB frame if so what kind of shape is it and do you want to sell it. Nice running into you at the swap meet Sunday to.

Kevin

Hey Kevin, good seeing you too. No, it is a long bed frame,, just has that goofy late model short bed on it. Thanks, Fred.

**specialtyretail** · 02-19-2018, 06:40 PM

Quote:

Originally Posted by Lumaestas

is it a V8? you have the power steering brackets?
Posted via Mobile Device

It was a V8, but the power steering pump and brackets are long gone. Thanks, Fred.

desertnick69 · 02-19-2018, 11:23 PM

Quote:

Originally Posted by specialtyretail

I don't think so, but will check Saturday afternoon.

Do you have the shifter assy? If so how much to 85027?

hunter1123 · 02-20-2018, 12:59 AM

Got any interior door panels?

**specialtyretail** · 02-20-2018, 05:29 PM

Quote:

Originally Posted by hunter1123

Got any interior door panels?

Let me check this evening. Thanks, Fred.

hunter1123 · 02-21-2018, 11:44 AM

Quote:

Originally Posted by specialtyretail

Let me check this evening. Thanks, Fred.

Okay thank you
Posted via Mobile Device

69BUCKET · 02-23-2018, 03:31 PM

Looking for heater vent duct tubes that GO TO defrost vents in dash...

**specialtyretail** · 02-23-2018, 05:25 PM

Quote:

Originally Posted by 69BUCKET

Looking for heater vent duct tubes that GO TO defrost vents in dash...

They are ALWAYS rotten, just buy them new. Thanks, Fred.

**specialtyretail** · 02-26-2018, 03:54 PM

Quote:

Originally Posted by hunter1123

Okay thank you
Posted via Mobile Device

No door panels that are fit to use. Thanks, Fred.

67see10 · 02-26-2018, 06:19 PM

Quote:

Originally Posted by specialtyretail

Ignition switch and lock cylinder,, $18.00 shipped.

i'll take it and one more like it if you have it

**dmjlambert** · 02-26-2018, 08:59 PM

Hi, what is the condition of the short rubber cooling tube in the engine bay that goes between the blower motor and A/C evaporator core housing? If you have one... Mine is cracking and could use a fresher one.

**specialtyretail** · 02-27-2018, 12:01 PM

Quote:

Originally Posted by 67see10

i'll take it and one more like it if you have it

It is yours, but right now, I only have the one. Thanks, Fred.

**specialtyretail** · 02-27-2018, 12:02 PM

Quote:

Originally Posted by dmjlambert

Hi, what is the condition of the short rubber cooling tube in the engine bay that goes between the blower motor and A/C evaporator core housing? If you have one... Mine is cracking and could use a fresher one.

This truck is a heater only truck. Thanks, Fred.

**specialtyretail** · 03-04-2018, 06:38 PM

Quote:

Originally Posted by 67see10

i'll take it and one more like it if you have it

Just got another switch and cylinder assembly if you still need one. Thanks, Fred.

02-18-2018, 09:57 PM	#55
C1ph3r Registered User Join Date: Nov 2015 Location: Concord NC Posts: 263	Re: Parting out 69 C10,,, what you need??? What kind of shape is the PS box? I guess it should work on a 70? And last, shipped to 28027. Thanks, A.W. __________________ ~~~~~~~~~~~~~~~~~* 1970 C-10 LWB Build Thread

02-19-2018, 11:30 AM	#57
Firefighterkk Registered User Join Date: Jan 2015 Location: Miami Oklahoma Posts: 54	Re: Parting out 69 C10,,, what you need??? Needing a clutch pedal for my 68. Appears this truck is an auto, but have noticed you have made several other posts. Happen to have one?

02-19-2018, 12:51 PM	#59
Gus350 68 C 10 Join Date: Aug 2010 Location: Advance ,Mo Posts: 554	Re: Parting out 69 C10,,, what you need??? Fred is this a SWB frame if so what kind of shape is it and do you want to sell it. Nice running into you at the swap meet Sunday to. Kevin __________________ Kevin "Life is Hard But its Harder when your Stupid" John Wayne 68 C10 70 C20 http://67-72chevytrucks.com/vboard/s....php?t=602326#

02-20-2018, 12:59 AM	#65
hunter1123 Registered User Join Date: Apr 2014 Location: haines city Posts: 56	Re: Parting out 69 C10,,, what you need??? Got any interior door panels?

02-23-2018, 03:31 PM	#68
69BUCKET Registered User Join Date: Oct 2017 Location: Newton Posts: 216	Re: Parting out 69 C10,,, what you need??? Looking for heater vent duct tubes that GO TO defrost vents in dash...

02-19-2018, 12:59 PM	#60
Lumaestas Registered User Join Date: Jan 2016 Location: Albuquerque, New Mexico Posts: 36	is it a V8? you have the power steering brackets? Posted via Mobile Device

02-26-2018, 08:59 PM	#72
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,894	Re: Parting out 69 C10,,, what you need??? Hi, what is the condition of the short rubber cooling tube in the engine bay that goes between the blower motor and A/C evaporator core housing? If you have one... Mine is cracking and could use a fresher one.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.