1967 C10 Custom Big Window - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

eagleuh1 · 07-27-2010, 08:54 PM

Wow, wish they'de still have some rockers and cab corners in stock. Maybe a core support too. The trucks real nice lookin slick67. I really like the side emblem, makes it look like its going real fast sittin still.

Slick67 · 07-28-2010, 04:11 AM

Quote:

Originally Posted by 67chevy1series

man looks nice even with the hood not lining up it still looks awesome

Thanks! It sux, but I'll get it there!!!

Quote:

Originally Posted by ripdog28

Damn this thing is just Beautiful.

Thanks Ripdog! Been a long time to get it there. My first build is comin out a little better than I had expected.

Quote:

Originally Posted by VA72C10

hey, quick ????

Got my antenna installed today in the cowl but don't see the hole for the grommet....do you remember where it's located since you just installed that mac daddy antenna???

Right by where the antenna goes in the cowl there is a small hole like 3/8 just below the windsheild in the cab.

Quote:

Originally Posted by 67chevy1series

did your truck have a antenna from the factory or dealership if not then you will need to drill a hole but if you did then it should be there i would take the cowl panel off and put it all the way you want it then bolt the cowl back on

^ agreed!

Quote:

Originally Posted by VA72C10

don't want to thread jack too much

but it did have an antenna...so that's what is puzzling me...everything is shaved on my other truck so I never paid attention to where the antenna came out of and this one was done before as well of course...

Drill in the closest spot on the cab where the antenna wire is, you will be very close!

Quote:

Originally Posted by suville

Ya might remove the springs and then see if you can get it aligned, but I'm thinkin and from experience yur hinges are worn out You can find good used ones, cant vouch for repops tho.

Hey Suville! Yeah, worn out hinges will do that but I gotta try aligning the hinges one more time.

Quote:

Originally Posted by 68 Quad C10

that is what i was just going to say

if you take the springs off and it can be lined up good then you need new springs if it don't then i would say you need hinges..... its been to long since i did mine i had the same issue and i believe we went with new springs and hinges........oh and your truck looks AWSOME!!!!!

Cool. That gives me a little something to try. Thanks for the compliments!

Quote:

Originally Posted by smbrouss70

DO NOT USE REPRO HOOD HINGES! They will fold up due to thin metal and damage your hood and fenders. GMpartsdirect.com has Original GM Hood hinges, so they are probably still available from a local GM dealer (special order, I'm sure). GMpartsdirect shows the parts numbers and prices like below:

LH Hood Hinge 3911705 $66.64
RH Hood Hinge 3911706 $45.46

I have heard they suck too. The hinges are tight and seem to be in perfect shape, guess I'll test them by taking the springs out.

Quote:

Originally Posted by eagleuh1

Wow, wish they'de still have some rockers and cab corners in stock. Maybe a core support too. The trucks real nice lookin slick67. I really like the side emblem, makes it look like its going real fast sittin still.

Meeee too! Thanks eagleuh1, guess you are talkin about the 55 Bel Air emblems on the side! When people see it they don't even realize it's not factory badging..............I love that.

67-C10 · 07-28-2010, 10:42 PM

Oh, yeah this is looking sweet buddy, Great Work.

67chevy1series · 07-29-2010, 01:01 AM

x2

jlaird · 07-29-2010, 01:45 AM

looks great but what happened with the rallies?

Slick67 · 07-29-2010, 10:26 PM

Quote:

Originally Posted by 67-C10

Oh, yeah this is looking sweet buddy, Great Work.

Thanks for checkin out the thread! I appreciate the comments!!!

Quote:

Originally Posted by 67chevy1series

x2

Thanks Bro!

Quote:

Originally Posted by jlaird

looks great but what happened with the rallies?

Still got em! They are in the storage shed behind the shop and are awaiting new tires. I have plenty of other things to spend my money on for now so the tires are kinda on the backburner. Radiator and hoses, brake booster and lines, and front crossdrilled rotors are on the menu for now.

67chevy1series · 08-03-2010, 09:01 PM

well when you get any of that stuff let see it or hear about it oh wait its a sit well lets see about it

**kev2809** · 08-03-2010, 10:46 PM

hey david, figure i would drop by. i checked out your truck and "that other car" the day i went by the shop lol

both are very clean man, the paint on both of them looks flawless. i was asking your friend ronnie about the a/c setup and he said you might go with vintage. did you already get the stock setup or is it just going to be easier to go with vintage?

Slick67 · 08-04-2010, 12:40 AM

Quote:

Originally Posted by 67chevy1series

well when you get any of that stuff let see it or hear about it oh wait its a sit well lets see about it

It's gonna be a while before that stuff happens, having to slow my roll on the project to save some $$$. It will crank back up when the funds are right!

Quote:

Originally Posted by kev2809

hey david, figure i would drop by. i checked out your truck and "that other car" the day i went by the shop lol

both are very clean man, the paint on both of them looks flawless. i was asking your friend ronnie about the a/c setup and he said you might go with vintage. did you already get the stock setup or is it just going to be easier to go with vintage?

Thanks Kevin! Glad you got to see them! It was an A/C truck so I have all the stuff that came off of it, but Vintage Air is probably what I will go back with. The expense and the reliability are what made up my mind. To revive the old system would actually cost more in the long run. I'll get those parts powdercoated Thursday maybe Friday so you can scoop em up this weekend.

**kev2809** · 08-04-2010, 09:53 PM

no rush on the parts. im going to corpus christi this weekend anyways, might get a chance to go sunday if your there.

hey, what headers are you gonna run? i seen the stock ones in there, you gonna paint them or go with shorties?

Slick67 · 08-05-2010, 01:11 AM

Quote:

Originally Posted by kev2809

no rush on the parts. im going to corpus christi this weekend anyways, might get a chance to go sunday if your there.

hey, what headers are you gonna run? i seen the stock ones in there, you gonna paint them or go with shorties?

Goin with shorties or 3/4's not sure yet, but they will be ceramic coated. I hope others on here don't think I am going to run the crusty manifolds!

67chevy1series · 08-05-2010, 11:10 PM

so whats next on the interior

Slick67 · 08-06-2010, 12:06 PM

Quote:

Originally Posted by 67chevy1series

so whats next on the interior

Ducting under the dash and getting the seats bolted down for a test fit with the carpet in. I suppose I could wire everything under the hood so I could get my radio workin. You are more than welcome to come by and help!

67chevy1series · 08-06-2010, 01:26 PM

i will be right there

David67 · 08-07-2010, 10:50 PM

Man.....I just read through the thread and your truck is sick!!

Nice meeting you at the show tonight. I hope I can see this someday in person!

Slick67 · 08-08-2010, 02:04 AM

Quote:

Originally Posted by David67

Man.....I just read through the thread and your truck is sick!!

Nice meeting you at the show tonight. I hope I can see this someday in person!

Dude, anytime you like. Likewise, nice meeting you. I'll PM you my number and you can swing by the shop and check it out. It's about 12 minutes from the car show.

**kev2809** · 08-08-2010, 10:53 AM

what car show was there that I missed?

Slick67 · 08-08-2010, 12:40 PM

Quote:

Originally Posted by kev2809

what car show was there that I missed?

It's the Niftee 50ees, every Saturday night starting at about 5:30 till about 9. Located at Spring Cypress @ Champions Forest Dr. right off of 249.

Slick67 · 08-09-2010, 10:08 PM

Since I got my new camera I have been takin a few photos. This is my nephews truck beside mine, and a shot of the candy paint. If you look to the side of the shop......Ronnie's new doghouse is being built for when the little woman gets mad at him.

Name: oldies.jpg
Views: 2485
Size: 51.0 KB

Name: oldies1.jpg
Views: 1942
Size: 48.3 KB

David67 · 08-09-2010, 10:50 PM

Quote:

Originally Posted by Slick67

Since I got my new camera I have been takin a few photos. This is my nephews truck beside mine, and a shot of the candy paint. If you look to the side of the shop......Ronnie's new doghouse is being built for when the little woman gets mad at him.

Attachment 619937

Attachment 619938

Attachment 619930

Good to see them together! That paint really pops!! What's the color again?

**kev2809** · 08-09-2010, 11:05 PM

I see you guys cleaned up lol..truck looks nice! what's the plans for your nephews truck?

ima have to check out that show when I get my truck running..sounds like fun. I wish we had somethin like that around here.

VA72C10 · 08-10-2010, 12:00 AM

Looking good! Nice pair of trucks. Clean stock and clean modified!!!

Love the pearl....

mcbassin · 08-10-2010, 12:24 AM

Still trying to get used to your avatar change, it was different for so long.... Every time I stop by, I'm like, I recognize that truck but not that avatar? wait I know who that is. Anyways, the paint looks amazing in the sun! The other truck is very nice too!

67-C10 · 08-10-2010, 12:24 AM

Quote:

Originally Posted by David67

Good to see them together! That paint really pops!! What's the color again?

Heres his info.

Quote:

Originally Posted by Slick67

Here we go. PAINT!!! Went to the paint store and got my paint it's called Oh So Orange. I got my blue ghost pearl powder in on Thursday so ready to paint. I moved everything outta the shop and cleaned it. We moved all of the truck parts in and set them up as they would be painted. Ready for Saturday.

Quote:

Originally Posted by Slick67

Bottom line - 1 coat of sealer, 4 coats of orange, 4 coats of candy, 1 coat of ghost blue pearl, 2 coats of clear coat. That's 12 coats on it. D@MN!!!!!

Slick67 · 08-10-2010, 12:29 AM

Quote:

Originally Posted by David67

Good to see them together! That paint really pops!! What's the color again?

Thanks David! It is PPG Oh So Orange with Ghost Blue Pearl in the clearcoat.

Quote:

Originally Posted by kev2809

I see you guys cleaned up lol..truck looks nice! what's the plans for your nephews truck?

ima have to check out that show when I get my truck running..sounds like fun. I wish we had somethin like that around here.

We cleaned a little, but still have a mess to the side. Cody wants to keep it as stock as possible which is cool cause it is a Highlander truck. Come out before you get it running too. It's every Saturday and it's close to the shop.

Quote:

Originally Posted by VA72C10

Looking good! Nice pair of trucks. Clean stock and clean modified!!!

Love the pearl....

Thanks VA, since I have not done anything to it lately I decided to take a pic of NO progress.

07-27-2010, 08:54 PM	#776
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: 1967 C10 Custom Big Window Wow, wish they'de still have some rockers and cab corners in stock. Maybe a core support too. The trucks real nice lookin slick67. I really like the side emblem, makes it look like its going real fast sittin still.

07-28-2010, 10:42 PM	#778
67-C10 Registered User Join Date: Jul 2008 Location: Taunton, MA Posts: 224	Re: 1967 C10 Custom Big Window Oh, yeah this is looking sweet buddy, Great Work. __________________ 67 C10 2wd Stepside (to be fleetside), Factory AC truck, Big Back Window, just got a 6.0/6l90e to jam in it now..... Needed: paint and lots of it. and i'm sure lots more misc. parts. Project 67 short step Build Thread 01 Sierra Crew 6.0 2015 Ford F150 Work gave me truck i really wouldn't buy a ford. Last edited by 67-C10; 07-28-2010 at 10:42 PM.

07-29-2010, 01:01 AM	#779
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window x2

07-29-2010, 01:45 AM	#780
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	Re: 1967 C10 Custom Big Window looks great but what happened with the rallies?

08-03-2010, 09:01 PM	#782
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window well when you get any of that stuff let see it or hear about it oh wait its a sit well lets see about it

08-03-2010, 10:46 PM	#783
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: 1967 C10 Custom Big Window hey david, figure i would drop by. i checked out your truck and "that other car" the day i went by the shop lol both are very clean man, the paint on both of them looks flawless. i was asking your friend ronnie about the a/c setup and he said you might go with vintage. did you already get the stock setup or is it just going to be easier to go with vintage? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-04-2010, 09:53 PM	#785
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: 1967 C10 Custom Big Window no rush on the parts. im going to corpus christi this weekend anyways, might get a chance to go sunday if your there. hey, what headers are you gonna run? i seen the stock ones in there, you gonna paint them or go with shorties? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-05-2010, 11:10 PM	#787
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window so whats next on the interior

08-06-2010, 01:26 PM	#789
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 C10 Custom Big Window i will be right there

08-07-2010, 10:50 PM	#790
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: 1967 C10 Custom Big Window Man.....I just read through the thread and your truck is sick!! Nice meeting you at the show tonight. I hope I can see this someday in person! __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-08-2010, 10:53 AM	#792
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: 1967 C10 Custom Big Window what car show was there that I missed? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-09-2010, 10:08 PM	#794
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Since I got my new camera I have been takin a few photos. This is my nephews truck beside mine, and a shot of the candy paint. If you look to the side of the shop......Ronnie's new doghouse is being built for when the little woman gets mad at him. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

08-09-2010, 11:05 PM	#796
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: 1967 C10 Custom Big Window I see you guys cleaned up lol..truck looks nice! what's the plans for your nephews truck? ima have to check out that show when I get my truck running..sounds like fun. I wish we had somethin like that around here. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-10-2010, 12:00 AM	#797
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1967 C10 Custom Big Window Looking good! Nice pair of trucks. Clean stock and clean modified!!! Love the pearl.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-10-2010, 12:24 AM	#798
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1967 C10 Custom Big Window Still trying to get used to your avatar change, it was different for so long.... Every time I stop by, I'm like, I recognize that truck but not that avatar? wait I know who that is. Anyways, the paint looks amazing in the sun! The other truck is very nice too! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.