06-06-2019, 12:41 PM | #801 | |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Quote:
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
06-06-2019, 12:47 PM | #802 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Ok, lets talk trucks again for the moment. I took loaded Jake up on my recently purchased trailer. Its a tight squueze on an 18' but it works. I jetted off the New Star Muffler to get a temporay exhaust installed from the manifold back.
My plan was to have them tun new 2.5" pipe from the stock manifolds down to the middle of the truck. They would install my Magna-Flow mufflers and use the existing hangers. I was shocked that the quoted me 400.00 considering I provided the mufflers but I wanted it quieter. I would like to work on the motor and not rattle the walls with an open exhaust. Unfortunately the bolts on the passenger side were seized up. They tried heating them, but they sheared off. Even after welding a nut to the remaining stud that sheared off too. So I picked it up as is and decided to hold off till contemplate my options.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
06-06-2019, 12:52 PM | #803 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
The next leg of the Saturday morning adventure led me to Cypress Auto Interiors. I dropped off the inserts that Jaime had previously stitched up. The padding on the top was too thick so they had to be modified and re-glued.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
06-06-2019, 12:55 PM | #804 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
The final stop for that trip was at Homegrown Hotrods. We wanted to pull the bed so Aaron and his crew could get another round of blocking and Tamco sealer in place. We pulled the bed and left it on a cart .
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
06-07-2019, 03:33 PM | #805 | |
chevy truck fan
Join Date: Mar 2005
Location: Gilbert, arizona 85298
Posts: 2,008
|
Re: "Crewcab Jake" the 84 to 74 conversion
Quote:
Thanks for the info. Yea.. I "autometered" my '72 dash as I installed a Custom bezel too. So i know what you mean!!! i would venture to say that the squarebody dash is a little more involved - you know with all the new tech. that the manufacture had bettered in a year or so... thanks again... |
|
06-13-2019, 02:06 PM | #806 |
Garage wrench
Join Date: Feb 2008
Location: LaCrosse, WI
Posts: 1,855
|
Re: "Crewcab Jake" the 84 to 74 conversion
With the exhaust issue, is it now LS swap time for Jake?
__________________
-Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD..... |
06-13-2019, 05:15 PM | #807 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: "Crewcab Jake" the 84 to 74 conversion
Problem: Broken manifold collector flange bolts for a non-LS based engine.
Possible fixes: 1) A set of headers or manifolds. Or..... 2) A complete LS swap. I can see where serious thought is required to come to a decision .
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
06-17-2019, 01:22 PM | #808 | |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Quote:
I plan to see what difficulties I run in to on the exhaust manifold removal. If I can save it, I will. If not I'll replace it with a new stock manifold. The motor swap will come at some point when I find a donor at a fair price. Regarding that, in the past I have sought after an LS 6.2 based on my experience with them. Unfortunately they are expensive and finding a low mileage donor is now near impossible. The LT is certainly as good as the LS platform and I think it will prove to be even better. Couple that with the ability to find low mileage take outs, and it looks very inviting. I just bought a 2019 GMC Sierra (ugliest truck I have ever owned) and love what the 8L90 does for the LT 5.3. I'm getting 22mpg and it has less than 1000 miles on it. I feel that a cammed and tuned 5.3LT with a 8L90 would be a great package for Jake.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
06-17-2019, 03:24 PM | #809 |
Registered User
Join Date: Feb 2012
Location: CA
Posts: 846
|
Re: "Crewcab Jake" the 84 to 74 conversion
Truck looks great Ken.
__________________
"Dixie" - 1988 Chevrolet V30 CC DRW "3+3" | 7.4L 454 (L19) | TH400 | 4" lift | 35"s "Lucille" - 1949 Chevrolet 3100 (on hold) |
06-20-2019, 07:22 PM | #810 |
Registered User
Join Date: Mar 2007
Location: Farmington, MN
Posts: 928
|
Re: "Crewcab Jake" the 84 to 74 conversion
I once had "luck" blowing a broken stud out with the torch. I saw the owner of a local engine shop do it and it looked pretty slick. I was able to do this on a customer's truck to the dismay of my boss when I told him how I fixed the problem. I have tried it a couple times since and basically cut the ear off the manifold. If you had the correct size torch tip and some luck this could be an option to get the stud out.
__________________
I can still count my vehicles on two... wait three hands. |
06-28-2019, 11:46 AM | #811 | |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Quote:
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
07-05-2019, 03:01 PM | #812 |
Registered User
Join Date: Jul 2010
Location: cleveland Ga.
Posts: 40
|
Re: "Crewcab Jake" the 84 to 74 conversion
I'm suffering withdrawals...Just sayin.
|
07-08-2019, 10:16 AM | #813 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: "Crewcab Jake" the 84 to 74 conversion
Are you finished playing with trailers yet? Its been a whole month without any Jake progress...C10' in the Park is only 74 days away.
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
07-09-2019, 10:16 AM | #814 | |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Quote:
I actually sold a 2018 C&M 18' dovetail yesterday. My HOA is threatening legal action so I'm taking a break from trailer sales. Since time is short between now and C10s in the Park, its time to get busy again. I'll have updates coming soon.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
07-09-2019, 12:22 PM | #815 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Ok, I do have a small update. I dropped by Homegrown and checked in my bed progress. The factory spot welds on the tailgate had been worked smooth a a coat of Tamco high build had been added. That was blocked and Tamco 2k sealer was laid over the top. Its baking in Texas sun before another round of blocking.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
07-09-2019, 02:56 PM | #816 |
State of Confusion!
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,221
|
Re: "Crewcab Jake" the 84 to 74 conversion
Very nice Ken. I may have missed it somewhere but is this one going to be a semi-gloss/flat paint or is there eventually going to be shiny paint like the old one?
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
07-09-2019, 03:53 PM | #817 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: "Crewcab Jake" the 84 to 74 conversion
That's the nice part about Texas, Free paint baking! Dang, no more Krazy Ken's Trailer Emporium! I had Discovery Channel on the phone!
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
07-10-2019, 12:09 AM | #818 |
Senior Member
Join Date: Feb 2011
Location: Papillion, Ne
Posts: 897
|
Re: "Crewcab Jake" the 84 to 74 conversion
Oh, what could have been
__________________
-Doug '05 RCSB Sierra 2WD '71 Sierra 2WD Longbed '98 Silverado K1500 Xcab...sold '72 Highlander"Raymond"...sold |
07-15-2019, 01:28 PM | #819 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
It will have a gloss finish when complete. What your looking at is a slow process of the bodywork getting done between complete paints at the bodyshop. It should be in final stages of K2 epoxy before C10s in the Park.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
07-15-2019, 01:31 PM | #820 | ||
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Quote:
Quote:
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
||
07-16-2019, 11:01 AM | #821 |
Registered User
Join Date: Sep 2009
Location: Quitman, Texas
Posts: 52
|
Re: "Crewcab Jake" the 84 to 74 conversion
How did I just find out about this, and it's only 2 hours from my house. I guess I better get busy too. We built/rebuilt/converted the Falcon Gasser in 21 days and completely built the Model A in 90 days. Yeah, plenty of time.
|
07-16-2019, 12:19 PM | #822 | |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: "Crewcab Jake" the 84 to 74 conversion
Quote:
I still plan to attend as a spectator and visit with friends.
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
|
07-16-2019, 12:30 PM | #823 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: "Crewcab Jake" the 84 to 74 conversion
I woke up that AM, went to register, & found out it sold-out within hours after the midnight launch. You're not the only one that will be attending as a spectator
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
08-02-2019, 09:31 AM | #824 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Are ya'll ready for some updates? Man its been a busy Summer here. Between geting ready for family to come stay, family vacation, and friends in town for my daughters baby shower its been crazy. I bought a new truck and I'm trying to get my 2016 ready for market. I also picked up a 1998 Lincoln Navigator from a friend that needed to move it out.
Chris and I spent a couple of days last weekend building a gazebo for my house and installing a roof on a deck he built. Beyond that we aint been doing nothing.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
08-02-2019, 09:34 AM | #825 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: "Crewcab Jake" the 84 to 74 conversion
Sunday we finally started back on Crewcab Jake. I committed to have a motor worth looking at for C10s in the Park. Theres a whole bunch of ugly under that hood, but we plan to make it presentable.
Our objective is to make it as nice as possible without breaking the bank. Eventually it will be replaced with a late model conversion. Until then lets see if this old smog dog will hunt.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 08-02-2019 at 10:01 AM. |
Bookmarks |
|
|