Daverods project 66 - Page 36 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ruffrida2005 · 10-12-2009, 10:07 PM

check out my photobucket. http://s581.photobucket.com/albums/ss260/ruffrida2005/

daverod · 10-12-2009, 10:07 PM

Now I have to build stuff and rember too.

Good thing I kept my rear notch maybe I can use it in the front.

daverod · 10-12-2009, 10:10 PM

Now that's more like it. All I wanted to know. Whats the diff between the mustang one and the pinto one? Is yours a mustang?

Strodder · 10-12-2009, 10:21 PM

Quote:

Originally Posted by daverod

Started thinking about my front end parts. I want to get everything powder coated. I'm going with 2 1/2" dropped spindles and air bags. My cross member has been pancaked 1 1/2". Do you think I'll need to remove the rubber bumper and its bracket to lay frame. What about the shock mount location? Does this stay in the same location or will this also have to be moved? I'm also thinking about the steering. If I lay frame do I need to go with rack and pinion or can I do it some other way.

U need shorter shocks.

daverod · 10-12-2009, 10:22 PM

Quote:

Originally Posted by Strodder

U need shorter shocks.

Do they go in the same spots? Did I tell you I screwed up and fell asleep and missed out on some more bezels. Sold for like 60 bucks some used ones for 40 somthing. Woke up missed them by 15 min.

Strodder · 10-12-2009, 10:44 PM

Quote:

Originally Posted by daverod

Do they go in the same spots? Did I tell you I screwed up and fell asleep and missed out on some more bezels. Sold for like 60 bucks some used ones for 40 somthing. Woke up missed them by 15 min.

It does help if you stay awake.

bubba327 · 10-12-2009, 11:12 PM

What's the update on the transmission? Now that it is out.....Keep me posted-- mine comes out maybe next week if time and weather permits.
Something to add to "This I Know thread"--- "Take the crossmember out and un-bolt the bell housing...."

daverod · 10-12-2009, 11:37 PM

Quote:

Originally Posted by bubba327

What's the update on the transmission? Now that it is out.....Keep me posted-- mine comes out maybe next week if time and weather permits.
Something to add to "This I Know thread"--- "Take the crossmember out and un-bolt the bell housing...."

I did'nt have to remove the cross member. Once I saw I could unbolt the bell housing it came right out. The bolts for the bell housing where on the inside. It like a 2 part bell housing. Unbolt it from the engine, then slid it back enough to get a wrench inside to undo the two bolts on the side. Unbolt the last two transmission bolts and bam it's out.

I took it down this afternoon should know tomrorrow.

daverod · 10-12-2009, 11:44 PM

Quote:

Originally Posted by Strodder

It does help if you stay awake.

Just wait when the time is right, bam! I'll have me some bezels. For cheap

I just have to stay awake and relax. And no beer or Rockstar. Damn, it might be awhile.

Any idea how to tell a 71-72 front a arm from a 73 a arm. I took my arms off a sub. The guy said it was a 71. I don't have the title or anything so I don't really know? The sway arm was rubber mounted.

ruffrida2005 · 10-12-2009, 11:52 PM

Mine is a mustang rack, 79-93. I'm not sure what the diffrence between the musgang and pinto. I think the pinto may be a little shorter though.

ruffrida2005 · 10-12-2009, 11:56 PM

My understanding is that the 63-87 are all the same, 63-72 use pressed in bushings. Then you know the ball joints are diffrent from 63-70; 71-72; 73-87

daverod · 10-13-2009, 09:58 AM

Quote:

Originally Posted by ruffrida2005

My understanding is that the 63-87 are all the same, 63-72 use pressed in bushings. Then you know the ball joints are diffrent from 63-70; 71-72; 73-87

I was wondering if the arms are the same except for the bushings I wonder why the ball joints are different? I need to get new ball joints. Just want to make sure I get the right ones.

ruffrida2005 · 10-13-2009, 10:05 AM

balljoints are diffrent because the spindles are diffrent. You know GM has to change something to make more money. It just depends on what spindles you wanna use, if your going 5 lug go look for some 73+ spindles, the other 2 are 6 lug.

daverod · 10-13-2009, 10:08 AM

Quote:

Originally Posted by ruffrida2005

balljoints are diffrent because the spindles are diffrent. You know GM has to change something to make more money. It just depends on what spindles you wanna use, if your going 5 lug go look for some 73+ spindles, the other 2 are 6 lug.

The guy said mine was a 71 and it has 5 lug. I'm starting to think maybe it was'nt a 71. Anybody know if this is a 71?

bubba327 · 10-13-2009, 11:41 AM

71 & 72 were the first year of standard issue disc brakes and are 5 lug. I think that I heard that the 71 and 72 were steel on steel in the upper and lower control shaft threaded ends and that 73 and up were rubber mounted in the shaft ends. Does yours have grease zerks in the ends??? if so, it is probably is 71/72,
Bubba

daverod · 10-13-2009, 02:33 PM

I don't get it now I can't post pictures?

watahyahknow · 10-13-2009, 03:03 PM

dunno why , do you use photobucket.com? you should at least be able to post the links to the pics

Strodder · 10-13-2009, 04:03 PM

I've been using smugmug.com for years. Mention my name if you use it. I get a discount for the year.
Check out my Smugmug.
www.belair.smugmug.com

watahyahknow · 10-13-2009, 04:16 PM

it might be site related or you just have to much pics in youre account
photobucket is free you could open one just to see if that helps you posting the pics here

daverod · 10-13-2009, 05:10 PM

I can't believe they limit the pictures. Look at Allans site.

I'm pissed. It just not the same unless I get to post pictures.

ruffrida2005 · 10-13-2009, 05:22 PM

Man i keep forgetting that 71-72 are 5 lug, I need to drill that in my brain. But if your going to go 5 lug go with the 73-87 since it doesn't use the crazy bushings.

daverod · 10-13-2009, 07:21 PM

Quote:

Originally Posted by ruffrida2005

Man i keep forgetting that 71-72 are 5 lug, I need to drill that in my brain. But if your going to go 5 lug go with the 73-87 since it doesn't use the crazy bushings.

to late.

joe231 · 10-13-2009, 08:30 PM

Quote:

Originally Posted by watahyahknow

it might be site related or you just have to much pics in youre account
photobucket is free you could open one just to see if that helps you posting the pics here

Quote:

Originally Posted by daverod

I can't believe they limit the pictures. Look at Allans site.

I'm pissed. It just not the same unless I get to post pictures.

I always upload pics from my computer and have never had problems with any limit... Are you sure your pics aren't too big?

ol Curt · 10-13-2009, 09:01 PM

Quote:

Originally Posted by joe231

I always upload pics from my computer and have never had problems with any limit... Are you sure your pics aren't too big?

Or that you didn't fall asleep while posting them?

joe231 · 10-13-2009, 09:36 PM

10-12-2009, 10:07 PM	#876
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 check out my photobucket. http://s581.photobucket.com/albums/ss260/ruffrida2005/ __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-12-2009, 10:07 PM	#877
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Now I have to build stuff and rember too. Good thing I kept my rear notch maybe I can use it in the front. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 10-13-2009 at 10:04 AM.

10-12-2009, 10:10 PM	#878
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Now that's more like it. All I wanted to know. Whats the diff between the mustang one and the pinto one? Is yours a mustang? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 10-12-2009 at 10:10 PM.

10-12-2009, 11:12 PM	#882
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 What's the update on the transmission? Now that it is out.....Keep me posted-- mine comes out maybe next week if time and weather permits. Something to add to "This I Know thread"--- "Take the crossmember out and un-bolt the bell housing...." __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

10-12-2009, 11:52 PM	#885
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Mine is a mustang rack, 79-93. I'm not sure what the diffrence between the musgang and pinto. I think the pinto may be a little shorter though. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-12-2009, 11:56 PM	#886
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 My understanding is that the 63-87 are all the same, 63-72 use pressed in bushings. Then you know the ball joints are diffrent from 63-70; 71-72; 73-87 __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-13-2009, 10:05 AM	#888
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 balljoints are diffrent because the spindles are diffrent. You know GM has to change something to make more money. It just depends on what spindles you wanna use, if your going 5 lug go look for some 73+ spindles, the other 2 are 6 lug. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-13-2009, 11:41 AM	#890
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 71 & 72 were the first year of standard issue disc brakes and are 5 lug. I think that I heard that the 71 and 72 were steel on steel in the upper and lower control shaft threaded ends and that 73 and up were rubber mounted in the shaft ends. Does yours have grease zerks in the ends??? if so, it is probably is 71/72, Bubba __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

10-13-2009, 02:33 PM	#891
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I don't get it now I can't post pictures? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

10-13-2009, 03:03 PM	#892
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 dunno why , do you use photobucket.com? you should at least be able to post the links to the pics __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-13-2009, 04:03 PM	#893
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 I've been using smugmug.com for years. Mention my name if you use it. I get a discount for the year. Check out my Smugmug. www.belair.smugmug.com __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

10-13-2009, 04:16 PM	#894
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 it might be site related or you just have to much pics in youre account photobucket is free you could open one just to see if that helps you posting the pics here __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-13-2009, 05:10 PM	#895
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I can't believe they limit the pictures. Look at Allans site. I'm pissed. It just not the same unless I get to post pictures. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

10-13-2009, 05:22 PM	#896
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Man i keep forgetting that 71-72 are 5 lug, I need to drill that in my brain. But if your going to go 5 lug go with the 73-87 since it doesn't use the crazy bushings. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-13-2009, 09:36 PM	#900
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Daverods project 66 __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.