What did you do to your truck today? - Page 38 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

markeb01 · 03-01-2010, 11:56 PM

Quote:

Originally Posted by lakeroadster

Got the gauges mounted in the '67 Camaro dash in my '65 SWB SS. Also installed boots for the Shifter and floor hand brake.

Can't wait to see this finished!

markeb01 · 03-02-2010, 12:06 AM

Added diamond tufting to the firewall to match the rest of the interior.

ravens65 · 03-02-2010, 10:12 PM

Quote:

Originally Posted by Vernski

Eric nice looking truck I like the gauges they look good. Did you powder-coat the grill & bumper or paint it? They have that soft look....Vernski

nope just primer black, it just looks wicked in flat black

jgh64pkup · 03-02-2010, 11:02 PM

wow mark im amazed every time i see your interior

markeb01 · 03-03-2010, 02:09 AM

Quote:

Originally Posted by jgh64pkup

wow mark im amazed every time i see your interior

Thanks for the feedback. I guess one of these days I'll have to stop messing with it and leave it alone, but I never seem to run out of ideas for new projects.

glendale · 03-06-2010, 03:16 PM

well i have not done much. but my plaque showed up yesterday so i flaked it and hung it. what do you guys think?

jbgroby · 03-06-2010, 04:53 PM

Today with the weather being near perfect I was able to weld up the last of the small holes that the PO had put in the door for bigger West Coast mirror's and welded up the chevy C-20 badge holes. I drilled out the two holes needed for mounting the V-6 emblems on the front part of the fender.

I also drilled out the last remaining nut (broken bolt) that held on the stock mirrors. I'll have to use longer bolts and reach from behind the panel to put on the new mirror.

I can't remember if they have a blind nut anchor for this I thought there was, Anybody got a pic or link for one.

I tapped my very first hole for a 16 t/per inch for the lower fender mount.

And tonight I'm going to a club cruise-in.

All in All a perfect day.

rendus · 03-06-2010, 06:46 PM

I dug into both my front fender bottoms to see what kind of patching they'll need.

The right side had a 4" x 5" metal patch riveted in and then slathered with bondo. The left side had just bondo filling the rust holes and dents. A half inch over most of it and a clob the size of a baby's fist in the biggest hole. Gotta love previous owners!

badriv455 · 03-06-2010, 10:43 PM

I replaced the windshield and the hood today on my '64 C10. Thanks to my father in law who new how to put the windshield in. I never would've gotten it on my own.

64GMCHorsepower · 03-06-2010, 11:05 PM

I actually installed my bed fill gas filler, installed the peel-a-mat in the doors to quieten them down, put the right bolts to hold my front bumper on, and installed almost all of the bolts holding the bed wood and the strips together.....

oh, and I sprayed off the truck to help keep it clean.....

1Bad62Pro/Street · 03-06-2010, 11:41 PM

Well I was off today so I did some cleaning for preparation for this Spring when I will start back on her.
I checked the truck all over and seen all the troubled areas that needs to be addressed.
The truck has sat for 4 years so there is a lot issues that need to be addressed.
My plans are to beef up the Power Train Set-Up.
Engine, trans, front and rear suspension.
The theme idea is going to stay the same.
Nostalgia Pro/Street.
Here are some of the Pics I took today.

64GMCHorsepower · 03-06-2010, 11:52 PM

You need bigger tires in the rear 1BAD62.......

1Bad62Pro/Street · 03-06-2010, 11:55 PM

Here is some of the issues:

markeb01 · 03-07-2010, 12:03 AM

I really like your truck and the direction you're taking it. Anxious to see the progress coming up.

1Bad62Pro/Street · 03-07-2010, 12:06 AM

Quote:

Originally Posted by 64GMCHorsepower

You need bigger tires in the rear 1BAD62.......

Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!
http://67-72chevytrucks.com/vboard/s...66#post3847666

I agree 100%
I'm still not satisfied!
I want this:
Mickey Thompson Sportsman Pro
The Widest High Performance Street Legal Tire.
33X21.50-15LT

http://www.mickeythompsontires.com/s...m=SportsmanPro

I have these:

1Bad62Pro/Street · 03-07-2010, 12:13 AM

Quote:

Originally Posted by markeb01

I really like your truck and the direction you're taking it. Anxious to see the progress coming up.

Thanks Bud!
I have to stop looking at you interior!
It's giving me ideas.
Yea, I am going to start back on her soon.
It will be a slow progress though.
Little bit of money along with a little bit of time it seems.
I will keep the updates coming.
I just miss driving her, and barking the tires when I shift the gears manually....

64GMCHorsepower · 03-07-2010, 12:14 AM

What kinda BS would you need to run those.......and I am assuming you have a narrowed rear end?

hossmann · 03-07-2010, 12:16 AM

I'm finishing some painting getting thing ready to fire up on 3-12

Sillyoldman · 03-07-2010, 12:22 AM

I set up another bedroom

No room in shop. At least its dry. Other than that I only had time to bend & install one brake line.

**Chevy Fleetside** · 03-07-2010, 12:26 AM

I cut up an 8 ft bed (only an 81 year model) then cut up some of the frame and rear diff and stuffed it all in my Ford Ranger. Oh yeah. And a front crossmember out of a 66 c 20. Drum brakes and all. Next time I go to my shop space, I think I am going to bring the front end home so I can clean and rebuild it.

markeb01 · 03-07-2010, 12:27 AM

Bed room!! I get it!

1Bad62Pro/Street · 03-07-2010, 12:29 AM

The Neglected Engine:

1Bad62Pro/Street · 03-07-2010, 12:34 AM

Front End:

joehalford01 · 03-07-2010, 12:35 AM

Finally got the sob 305 motor in my 65 ready to pull, couldn't finish though, I'm doing the engine swap in grass so I needed to pick up some plywood to roll the engine hoist on

.

Alan's Classic · 03-07-2010, 12:52 AM

Hung my fuel tank using these.

03-02-2010, 12:06 AM	#927
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Added diamond tufting to the firewall to match the rest of the interior.

03-02-2010, 11:02 PM	#929
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: What did you do to your truck today? wow mark im amazed every time i see your interior __________________ Gage 1967 C10 Shortbed Stepside

03-06-2010, 03:16 PM	#931
glendale Registered User Join Date: Jul 2009 Location: sacramento,ca Posts: 338	Re: What did you do to your truck today? well i have not done much. but my plaque showed up yesterday so i flaked it and hung it. what do you guys think?

03-06-2010, 04:53 PM	#932
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today? Today with the weather being near perfect I was able to weld up the last of the small holes that the PO had put in the door for bigger West Coast mirror's and welded up the chevy C-20 badge holes. I drilled out the two holes needed for mounting the V-6 emblems on the front part of the fender. I also drilled out the last remaining nut (broken bolt) that held on the stock mirrors. I'll have to use longer bolts and reach from behind the panel to put on the new mirror. I can't remember if they have a blind nut anchor for this I thought there was, Anybody got a pic or link for one. I tapped my very first hole for a 16 t/per inch for the lower fender mount. And tonight I'm going to a club cruise-in. All in All a perfect day. __________________ http://s1299.photobucket.com/user/jb...23904108567829

03-06-2010, 06:46 PM	#933
rendus Registered User Join Date: Apr 2009 Location: smyrna tn Posts: 221	Re: What did you do to your truck today? I dug into both my front fender bottoms to see what kind of patching they'll need. The right side had a 4" x 5" metal patch riveted in and then slathered with bondo. The left side had just bondo filling the rust holes and dents. A half inch over most of it and a clob the size of a baby's fist in the biggest hole. Gotta love previous owners!

03-06-2010, 10:43 PM	#934
badriv455 '67 Chevy C-50 Join Date: Feb 2008 Location: Monticello, IA Posts: 62	Re: What did you do to your truck today? I replaced the windshield and the hood today on my '64 C10. Thanks to my father in law who new how to put the windshield in. I never would've gotten it on my own. __________________ Bad Riv '67 C50 Flatbed Dump '98 Z71 Ext. Cab

03-06-2010, 11:05 PM	#935
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: What did you do to your truck today? I actually installed my bed fill gas filler, installed the peel-a-mat in the doors to quieten them down, put the right bolts to hold my front bumper on, and installed almost all of the bolts holding the bed wood and the strips together..... oh, and I sprayed off the truck to help keep it clean..... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-06-2010, 11:41 PM	#936
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Well I was off today so I did some cleaning for preparation for this Spring when I will start back on her. I checked the truck all over and seen all the troubled areas that needs to be addressed. The truck has sat for 4 years so there is a lot issues that need to be addressed. My plans are to beef up the Power Train Set-Up. Engine, trans, front and rear suspension. The theme idea is going to stay the same. Nostalgia Pro/Street. Here are some of the Pics I took today. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 03-06-2010 at 11:42 PM.

03-06-2010, 11:52 PM	#937
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: What did you do to your truck today? You need bigger tires in the rear 1BAD62....... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-06-2010, 11:55 PM	#938
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Here is some of the issues: Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

03-07-2010, 12:03 AM	#939
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? I really like your truck and the direction you're taking it. Anxious to see the progress coming up.

03-07-2010, 12:14 AM	#942
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: What did you do to your truck today? What kinda BS would you need to run those.......and I am assuming you have a narrowed rear end? __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-07-2010, 12:16 AM	#943
hossmann Registered User Join Date: Aug 2009 Location: Grinnell iowa Posts: 42	Re: What did you do to your truck today? I'm finishing some painting getting thing ready to fire up on 3-12

03-07-2010, 12:22 AM	#944
Sillyoldman #16876 Join Date: Apr 2005 Location: Auburn WA Posts: 12,266	Re: What did you do to your truck today? I set up another bedroom No room in shop. At least its dry. Other than that I only had time to bend & install one brake line. Attached Images __________________ Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. *"I love that old car smell"* *Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs.*

03-07-2010, 12:26 AM	#945
Chevy Fleetside Registered User Join Date: Sep 2006 Location: San Francisco Posts: 4,782	Re: What did you do to your truck today? I cut up an 8 ft bed (only an 81 year model) then cut up some of the frame and rear diff and stuffed it all in my Ford Ranger. Oh yeah. And a front crossmember out of a 66 c 20. Drum brakes and all. Next time I go to my shop space, I think I am going to bring the front end home so I can clean and rebuild it. __________________ "A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536



Register or Log In To remove these advertisements.

03-07-2010, 12:27 AM	#946
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Bed room!! I get it!

03-07-2010, 12:29 AM	#947
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? The Neglected Engine: Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

03-07-2010, 12:34 AM	#948
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Front End: Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

03-07-2010, 12:35 AM	#949
joehalford01 Registered User Join Date: May 2007 Location: Visalia, CA Posts: 98	Re: What did you do to your truck today? Finally got the sob 305 motor in my 65 ready to pull, couldn't finish though, I'm doing the engine swap in grass so I needed to pick up some plywood to roll the engine hoist on . __________________ Dirty fingernails don't make you a man...missing fingernails...now that makes you a man.

03-07-2010, 12:52 AM	#950
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: What did you do to your truck today? Hung my fuel tank using these. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

Register or Log In To remove these advertisements.