Parting out 83 Chevy Longbed - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NO LONGER DISTURBED KONCEPTZ · 11-23-2005, 08:20 PM

Quote:

Originally Posted by Tx Firefighter

What's your best price on the Th350c trans?

By the way, my step father's son is in your truck club I think....

I think I was asking 200 for it. What does he drive or is his name Ben????

Quote:

Originally Posted by benoit454

Great just post some bracket pics here or email them to me when ya get them

benoit454@yahoo.com and thanks.

Ok man Ill try soon.

Tx Firefighter · 11-23-2005, 10:06 PM

His name is Corely and he has a body dropped Suburban.

NO LONGER DISTURBED KONCEPTZ · 11-24-2005, 01:02 AM

Ok yeah, I posted pic of it a few months a go. He was at our Toy Run but I was in a wedding and didnt get to go.

corder13 · 11-28-2005, 06:31 PM

Would you happen to have the wiper motor in good working condition? Mine works on my '84, but on high it takes quite a few seconds to sweep the windshield, so it won't pass inspection. In otherwords, mine is REALLLLLLLY SLOOOOOW. LOL Anyway, if you have it, how much shipped to zip code 63351? Thanks.

Rick

NO LONGER DISTURBED KONCEPTZ · 11-29-2005, 01:02 PM

Quote:

Originally Posted by corder13

Would you happen to have the wiper motor in good working condition? Mine works on my '84, but on high it takes quite a few seconds to sweep the windshield, so it won't pass inspection. In otherwords, mine is REALLLLLLLY SLOOOOOW. LOL Anyway, if you have it, how much shipped to zip code 63351? Thanks.

Rick

It went to my wife's truck.

corder13 · 11-30-2005, 02:57 PM

Ok, thanks for the reply.

Rick

JonnyTechMech · 01-16-2006, 10:40 PM

Hey Disturbed,

I don't know if you started parting out the bed yet. If you haven't, go for it. I'll have to pass. I scored a free 79 chevy with a long bed this weekend. Besides I got a bigger problem. I have to replace a engine since my got craked during the freeze this past Nov.

NO LONGER DISTURBED KONCEPTZ · 01-17-2006, 11:49 AM

I havent parted the bed out yet. I would like to just sell it whole.

karichey22 · 01-26-2006, 12:16 AM

i need the bed bolts and the nuts how much if they are useable?

NO LONGER DISTURBED KONCEPTZ · 01-26-2006, 12:46 AM

Quote:

Originally Posted by karichey22

i need the bed bolts and the nuts how much if they are useable?

I used them on my daily when I took out the 3" body lift.

Prerunner1982 · 01-26-2006, 01:15 AM

Quote:

Originally Posted by karichey22

i need the bed bolts and the nuts how much if they are useable?

you can buy these at home depot or lowes.. they are called Carriage bolts.

do you happen to have the door stops? the drivers side on my wifes 87 completely fell off and door wont stay open.. how much shipped to 73003.

Clos'84TX · 01-26-2006, 08:30 AM

Hey Distrurbed, I'm just down the road from you. How much for the bed, and what condition is it in? How is the tail gate?

Oh yeah do you have a bumper with? I'm looking for a smooth.

NO LONGER DISTURBED KONCEPTZ · 01-26-2006, 03:32 PM

Quote:

Originally Posted by Clos'84TX

Hey Distrurbed, I'm just down the road from you. How much for the bed, and what condition is it in? How is the tail gate?

Oh yeah do you have a bumper with? I'm looking for a smooth.

The bed has some dents in it. There are pictures earlier in this thread of them. I already sold the tailgate. I dont have a factory rear bumper. If I did it would be on my other 84. Im asking 300.00 for the bed or some 67 truck parts. Pm me on those.

Prerunner1982 · 01-26-2006, 08:23 PM

Quote:

Originally Posted by Prerunner1982

do you happen to have the door stops? the drivers side on my wifes 87 completely fell off and door wont stay open.. how much shipped to 73003.

NO LONGER DISTURBED KONCEPTZ · 01-27-2006, 06:48 PM

Quote:

Originally Posted by Prerunner1982

you can buy these at home depot or lowes.. they are called Carriage bolts.

do you happen to have the door stops? the drivers side on my wifes 87 completely fell off and door wont stay open.. how much shipped to 73003.

No I dont have any door stops for the truck.

On another note the bolts are carriage bolts but the square part is longer then a normal bolt.

11-23-2005, 10:06 PM	#77
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Parting out 83 Chevy Longbed His name is Corely and he has a body dropped Suburban. __________________ I'm on the Instagram- @Gearhead_Kevin

11-24-2005, 01:02 AM	#78
NO LONGER DISTURBED KONCEPTZ Registered User Join Date: Aug 2004 Posts: 257	Re: Parting out 83 Chevy Longbed Ok yeah, I posted pic of it a few months a go. He was at our Toy Run but I was in a wedding and didnt get to go.

11-28-2005, 06:31 PM	#79
corder13 Registered User Join Date: Nov 2005 Location: Jonesburg, MO USA Posts: 7	Re: Parting out 83 Chevy Longbed Would you happen to have the wiper motor in good working condition? Mine works on my '84, but on high it takes quite a few seconds to sweep the windshield, so it won't pass inspection. In otherwords, mine is REALLLLLLLY SLOOOOOW. LOL Anyway, if you have it, how much shipped to zip code 63351? Thanks. Rick

11-30-2005, 02:57 PM	#81
corder13 Registered User Join Date: Nov 2005 Location: Jonesburg, MO USA Posts: 7	Re: Parting out 83 Chevy Longbed Ok, thanks for the reply. Rick

01-16-2006, 10:40 PM	#82
JonnyTechMech STOP! Hamma time!!! Join Date: Feb 2005 Location: Dallas TX. Posts: 145	Re: Parting out 83 Chevy Longbed Hey Disturbed, I don't know if you started parting out the bed yet. If you haven't, go for it. I'll have to pass. I scored a free 79 chevy with a long bed this weekend. Besides I got a bigger problem. I have to replace a engine since my got craked during the freeze this past Nov. __________________ Plan your work and work your plan!!!, or pitty da fool!! 87 GMC BaseTrim, 305 under the wrench/TH400/ 92 Chevy 1500, 350,TH700R4 sittin on dubs

01-17-2006, 11:49 AM	#83
NO LONGER DISTURBED KONCEPTZ Registered User Join Date: Aug 2004 Posts: 257	Re: Parting out 83 Chevy Longbed I havent parted the bed out yet. I would like to just sell it whole.

01-26-2006, 12:16 AM	#84
karichey22 Registered User Join Date: Jul 2005 Location: Red Oak, TX Posts: 11	Re: Parting out 83 Chevy Longbed i need the bed bolts and the nuts how much if they are useable? __________________ 83 swb in the works.

01-26-2006, 08:30 AM	#87
Clos'84TX Foom, foom, foom! Join Date: Mar 2005 Location: Abilene, TX Posts: 106	Re: Parting out 83 Chevy Longbed Hey Distrurbed, I'm just down the road from you. How much for the bed, and what condition is it in? How is the tail gate? Oh yeah do you have a bumper with? I'm looking for a smooth. __________________ - Dan 84' LWB C10 // 2.5" from collector back. duel Turbo Mufflers // 350 w/ TH350 long Headers//3.73 rearend gears Future Mods *3/4 suspension drop* Last edited by Clos'84TX; 01-26-2006 at 08:32 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.