84 with a Dropmember - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortchev · 04-09-2008, 06:28 PM

Nate ,

Yeah i have been reasearching on the internet hahaha and now my head hurts . I didnt realize that you were going to sell this kit , i was looking at the KP kit . Is your kit going to be complete...Bags , shocks , Notch,etc.

PBFAB.COM · 04-09-2008, 06:51 PM

Quote:

Originally Posted by shortchev

Nate ,

Yeah i have been reasearching on the internet hahaha and now my head hurts . I didnt realize that you were going to sell this kit , i was looking at the KP kit . Is your kit going to be complete...Bags , shocks , Notch,etc.

I just sent you a PM. Just keep in mind that there's always more than one way to skin a cat, and that often times the difference between "better" and "worse" is merely based on opinion, not fact. You can get the same ride quality out of a tapered sleeve and out of a double convoluted... when they are set-up properly.

The kit is complete from a-z. All you need is a drill and something to cut your frame in half with!

bcj67chevy · 04-09-2008, 08:12 PM

With the drop member, how far would the frame be off the ground at ride heigth?
And is the bottom of the straight part of the frame level?
Thanks,
bryan

PBFAB.COM · 04-09-2008, 09:32 PM

Quote:

Originally Posted by bcj67chevy

With the drop member, how far would the frame be off the ground at ride heigth?
And is the bottom of the straight part of the frame level?
Thanks,
bryan

The bottom of the framerials under the cab will be approx. 5", and yes... they sit level (I am not a big fan of the raked look!).

royo · 04-09-2008, 09:53 PM

nice

72BlckButy · 04-09-2008, 10:03 PM

Wow... from one Nate to another, you do some amazing work! Can't wait to see the kit you put together for lolife99, it will make the '86 ride just right.

tds · 04-10-2008, 02:15 AM

ahh i forgot a few questions. how much lift? are you a performance online dealer for that tank? got a pic from behind with that tank installed? just wondering if you mount a rollpan can you see the tank?

bcj67chevy · 04-10-2008, 04:46 AM

Quote:

Originally Posted by porterbuilt

The bottom of the framerials under the cab will be approx. 5", and yes... they sit level (I am not a big fan of the raked look!).

Thanks a lot for the info, i'll probably have many more questions to come.

FlatBrokeRacing · 04-10-2008, 05:36 AM

Amazing work once again.

PBFAB.COM · 04-10-2008, 05:39 AM

Quote:

Originally Posted by tds

ahh i forgot a few questions. how much lift? are you a performance online dealer for that tank? got a pic from behind with that tank installed? just wondering if you mount a rollpan can you see the tank?

The rear gets 8" of lift to match the front.

I am not a performance on-line dealer.

I will look to see if I have a pic from behind with the tank installed... I am pretty sure a roll pan will cover it up, you can't see it with a bumper.

PBFAB.COM · 04-10-2008, 05:39 AM

Quote:

Originally Posted by FlatBrokeRacing

Amazing work once again.

Thanks!

shortchev · 04-12-2008, 11:04 PM

Hello Nate ,

Thanks for letting me pick you brain on the phone the other day , You do great work and I will be talking to you soon on a rear kit .

Thanks Pete

shortchev · 04-19-2008, 03:46 AM

Any new pics yet ?

**lolife99** · 04-23-2008, 06:53 PM

ttt for updates?

tds · 04-23-2008, 11:43 PM

lets keep this at the top.

PBFAB.COM · 04-24-2008, 04:05 AM

Here's some updates... good and bad!

Bad:

The powdercoater I use is slower than I am! Looks like I should have the parts back by the end of the week.

Good:

Here's some pics of a front and rear that's heading off to MO.

**lolife99** · 04-24-2008, 04:54 AM

Christmas was never this good! Thanks for posting the pics.

**N2TRUX** · 04-24-2008, 06:06 AM

Quote:

Originally Posted by porterbuilt

.... Here's some pics of a front and rear that's heading off to MO.

tvblazer78 · 04-24-2008, 06:07 AM

I see no pics?

RunninLo · 04-24-2008, 06:24 AM

Nathan is secretly prototyping a new "reflex" powder that renders all parts near invisible similar to star trek cloaking device. Don't let DARPA find out he's been skimming for personal parts or there might be an "accident"

Josh
PS the powder coaters would have been in a bigger hurry if they would've been 72 Suburban parts

PBFAB.COM · 04-24-2008, 09:15 AM

Where did the pics go?????? They were there, I know they were!!!

Looks like I will have to repost them in the morning.

**lolife99** · 04-24-2008, 01:22 PM

They WERE there. Maybe I just imagined them.

SCOTI · 04-24-2008, 03:19 PM

Put the pipe down & step away. . . .....

PBFAB.COM · 04-24-2008, 04:27 PM

Quote:

Originally Posted by RunninLo

PS the powder coaters would have been in a bigger hurry if they would've been 72 Suburban parts

Actually... those parts have been at the powdercoaters for several months now!

PBFAB.COM · 04-24-2008, 04:30 PM

Let's try this again...

04-09-2008, 06:28 PM	#76
shortchev Registered User Join Date: Feb 2008 Location: Paradise,NL , Canada Posts: 77	Re: 84 with a Dropmember Nate , Yeah i have been reasearching on the internet hahaha and now my head hurts . I didnt realize that you were going to sell this kit , i was looking at the KP kit . Is your kit going to be complete...Bags , shocks , Notch,etc.

04-09-2008, 08:12 PM	#78
bcj67chevy 402 BIG BLOCK Join Date: Mar 2006 Location: McClelland IA Posts: 286	Re: 84 with a Dropmember With the drop member, how far would the frame be off the ground at ride heigth? And is the bottom of the straight part of the frame level? Thanks, bryan __________________ 1967 C10 swb 1970 GMC Jimmy 4x4 2005 Chevy tahoe Z71 2001 Chevy impala Last edited by bcj67chevy; 04-09-2008 at 08:15 PM.

04-09-2008, 09:53 PM	#80
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: 84 with a Dropmember nice __________________ nickle and dime Last edited by royo; 10-18-2008 at 10:26 PM. Reason: du huh

04-09-2008, 10:03 PM	#81
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 84 with a Dropmember Wow... from one Nate to another, you do some amazing work! Can't wait to see the kit you put together for lolife99, it will make the '86 ride just right. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 04-09-2008 at 10:04 PM.

04-10-2008, 02:15 AM	#82
tds Registered User Join Date: Jul 2007 Location: minnesota Posts: 191	Re: 84 with a Dropmember ahh i forgot a few questions. how much lift? are you a performance online dealer for that tank? got a pic from behind with that tank installed? just wondering if you mount a rollpan can you see the tank? __________________ 1981 - C-10 SCSB Planning on putting this thing on it's rocker! Last edited by tds; 04-10-2008 at 02:21 AM.

04-10-2008, 05:36 AM	#84
FlatBrokeRacing Registered User Join Date: Mar 2007 Location: Montgomery, Al. Posts: 289	Re: 84 with a Dropmember Amazing work once again.

04-12-2008, 11:04 PM	#87
shortchev Registered User Join Date: Feb 2008 Location: Paradise,NL , Canada Posts: 77	Re: 84 with a Dropmember Hello Nate , Thanks for letting me pick you brain on the phone the other day , You do great work and I will be talking to you soon on a rear kit . Thanks Pete

04-19-2008, 03:46 AM	#88
shortchev Registered User Join Date: Feb 2008 Location: Paradise,NL , Canada Posts: 77	Re: 84 with a Dropmember Any new pics yet ?

04-23-2008, 06:53 PM	#89
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 84 with a Dropmember ttt for updates? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-23-2008, 11:43 PM	#90
tds Registered User Join Date: Jul 2007 Location: minnesota Posts: 191	Re: 84 with a Dropmember lets keep this at the top. __________________ 1981 - C-10 SCSB Planning on putting this thing on it's rocker!

04-24-2008, 04:05 AM	#91
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 84 with a Dropmember Here's some updates... good and bad! Bad: The powdercoater I use is slower than I am! Looks like I should have the parts back by the end of the week. Good: Here's some pics of a front and rear that's heading off to MO. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

04-24-2008, 04:54 AM	#92
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 84 with a Dropmember Christmas was never this good! Thanks for posting the pics. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-24-2008, 06:07 AM	#94
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: 84 with a Dropmember I see no pics? __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

04-24-2008, 06:24 AM	#95
RunninLo 3DrDwn--the 'burb not the band Join Date: Jan 2007 Location: missoula, mt Posts: 598	Re: 84 with a Dropmember Nathan is secretly prototyping a new "reflex" powder that renders all parts near invisible similar to star trek cloaking device. Don't let DARPA find out he's been skimming for personal parts or there might be an "accident" Josh PS the powder coaters would have been in a bigger hurry if they would've been 72 Suburban parts __________________ Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327

04-24-2008, 09:15 AM	#96
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 84 with a Dropmember Where did the pics go?????? They were there, I know they were!!! Looks like I will have to repost them in the morning. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!



Register or Log In To remove these advertisements.

04-24-2008, 01:22 PM	#97
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 84 with a Dropmember They WERE there. Maybe I just imagined them. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-24-2008, 03:19 PM	#98
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,066	Re: 84 with a Dropmember Put the pipe down & step away. . . ..... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

04-24-2008, 04:30 PM	#100
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: 84 with a Dropmember Let's try this again... Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

Register or Log In To remove these advertisements.