The Official Bagged K5 thread - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scf100 · 01-22-2018, 01:46 PM

Quote:

Originally Posted by lowlifej

a couple shots of my turd

couple of shots of what?.........that things frigging awesome!

elkniks · 01-22-2018, 09:09 PM

Anyone have a suggested thread for notching the rear on a 4wd conversion? I installed trailing arms but have not got to notching the frame yet. I am way too high in the rear! Most would say the front too but one thing at a time.

smbrouss70 · 01-22-2018, 09:41 PM

Dead End Garage has a notch just for 4wd conversions.

http://www.azproperformance.com/Dead...Notch-4wd.html

elkniks · 01-22-2018, 10:03 PM

Quote:

Originally Posted by smbrouss70

Dead End Garage has a notch just for 4wd conversions.

http://www.azproperformance.com/Dead...Notch-4wd.html

Sweet, nice part. I wish I would have found those before I made my own spring pads but makes it clear what I need to do. Thanks.

smbrouss70 · 10-09-2018, 12:02 PM

Updated pics of mine.

5150 · 10-09-2018, 12:07 PM

Looks great Steve!

smbrouss70 · 10-10-2018, 09:59 AM

Quote:

Originally Posted by 5150

Looks great Steve!

Thanks Bryan!

YBNORML · 10-14-2018, 12:39 AM

Finally got around to bagging mine.

Just a basic bag job with a bolt in notch and Accuair.

american revolution · 10-20-2018, 01:42 AM

heres mine

**lolife99** · 10-20-2018, 10:24 AM

Awesome^^^^

YBNORML · 10-20-2018, 11:02 PM

Quote:

Originally Posted by american revolution

heres mine

Sexxy!!!!

smbrouss70 · 10-21-2018, 11:42 AM

Quote:

Originally Posted by YBNORML

Finally got around to bagging mine.

Just a basic bag job with a bolt in notch and Accuair.

Quote:

Originally Posted by american revolution

heres mine

I love both of these!

3drburb · 10-21-2018, 01:23 PM

Wow!! These are very impressive.

Duraburb · 01-31-2020, 07:51 PM

A ways to go, but here's mine

Urclever · 08-04-2020, 08:18 PM

I am looking to bag my blazer, where is a good place to mount the tanks?

smbrouss70 · 08-05-2020, 10:46 AM

I put my single 5 gallon tank between the back crossmember and the bumper. All of the electronics and valves are mounted on the crossmember itself, and the compressors are mounted on the outside of the framerails just in front of the bumper. Wiring was cleaned up after these pictures were taken.

smbrouss70 · 08-05-2020, 10:49 AM

A couple more pics showing the compressors tied into the tank. I also used the remote mount intake filters that came with the compressors and mounted them on that crossmember as well. They are in a spot where any water that is splashed up can't get to the filters. I don't have any pictures of that because it is all packed in so tightly that you can't even see it once it is all in place.

Urclever · 08-25-2020, 10:08 PM

Thank you i have been struggling with this for weeks now before I purchased. I bagged my c10 and there was more room to hide the components. I really appreciate it. Cheers

01-22-2018, 09:09 PM	#77
elkniks Registered User Join Date: Mar 2015 Location: Seaside,CA Posts: 142	Re: The Official Bagged K5 thread Anyone have a suggested thread for notching the rear on a 4wd conversion? I installed trailing arms but have not got to notching the frame yet. I am way too high in the rear! Most would say the front too but one thing at a time.

01-22-2018, 09:41 PM	#78
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: The Official Bagged K5 thread Dead End Garage has a notch just for 4wd conversions. http://www.azproperformance.com/Dead...Notch-4wd.html __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

10-09-2018, 12:02 PM	#80
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: The Official Bagged K5 thread Updated pics of mine. Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

10-09-2018, 12:07 PM	#81
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: The Official Bagged K5 thread Looks great Steve! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-14-2018, 12:39 AM	#83
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,844	Re: The Official Bagged K5 thread Finally got around to bagging mine. Just a basic bag job with a bolt in notch and Accuair. Attached Images __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

10-20-2018, 01:42 AM	#84
american revolution Registered User Join Date: Apr 2007 Location: san francisco Posts: 446	Re: The Official Bagged K5 thread heres mine Attached Images

10-20-2018, 10:24 AM	#85
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: The Official Bagged K5 thread Awesome^^^^ __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-21-2018, 01:23 PM	#88
3drburb Registered User Join Date: Jul 2011 Location: Kent, WA. Posts: 856	Re: The Official Bagged K5 thread Wow!! These are very impressive.

01-31-2020, 07:51 PM	#89
Duraburb Registered User Join Date: Aug 2014 Location: Eureka CA Posts: 94	Re: The Official Bagged K5 thread A ways to go, but here's mine Attached Images __________________ 1972 C20 Suburban, Bagged and c10 swapped Suspension (sold) 1969 Jimmy, 2wd swapped. bagged, body dropped

08-04-2020, 08:18 PM	#90
Urclever Registered User Join Date: Dec 2013 Location: San Jose Posts: 4	Re: The Official Bagged K5 thread I am looking to bag my blazer, where is a good place to mount the tanks?

08-05-2020, 10:46 AM	#91
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: The Official Bagged K5 thread I put my single 5 gallon tank between the back crossmember and the bumper. All of the electronics and valves are mounted on the crossmember itself, and the compressors are mounted on the outside of the framerails just in front of the bumper. Wiring was cleaned up after these pictures were taken. Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

08-05-2020, 10:49 AM	#92
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: The Official Bagged K5 thread A couple more pics showing the compressors tied into the tank. I also used the remote mount intake filters that came with the compressors and mounted them on that crossmember as well. They are in a spot where any water that is splashed up can't get to the filters. I don't have any pictures of that because it is all packed in so tightly that you can't even see it once it is all in place. Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

08-25-2020, 10:08 PM	#93
Urclever Registered User Join Date: Dec 2013 Location: San Jose Posts: 4	Re: The Official Bagged K5 thread Thank you i have been struggling with this for weeks now before I purchased. I bagged my c10 and there was more room to hide the components. I really appreciate it. Cheers



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.