DJ JR's Build Thread - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

noonzor · 08-04-2011, 12:04 AM

haha, shouldnt he be happier about this whole deal? he looks upset to be dirty haha.

djracer · 08-04-2011, 10:10 PM

I would be as happy as a puppy with two peckers.

djracer · 08-06-2011, 06:26 PM

Motor is in the hole. We will try for the transmission tomorrow. Pics to come.

We have to go Dj tonight to support our Habits! LOL

noonzor · 08-06-2011, 08:03 PM

Quote:

Originally Posted by djracer

i would be as happy as a puppy with two peckers.

lol!!!

djracer · 08-07-2011, 04:02 PM

More pics

djracer · 08-07-2011, 04:04 PM

Continued...

KQQL IT · 08-07-2011, 10:07 PM

Dj ive got a extra manual box.
Posted via Mobile Device

djracer · 08-07-2011, 11:33 PM

Thanks but I think I can get one from pull a part for cheap. I need to find one of those and a van tilt.

KQQL IT · 08-07-2011, 11:36 PM

Quote:

Originally Posted by djracer

Thanks but I think I can get one from pull a part for cheap. I need to find one of those and a van tilt.

Right on. Theyre fairly rare out here, guess Cali people are too lazy.
By the way a friend of mine just moved to your town from san diego.

djracer · 08-08-2011, 07:42 AM

kool tell him If he needs anything to call me I know a ton of people in the area. I have been here since 76. 334six575583.

djracer · 08-08-2011, 07:47 AM

Cade picked out the wheels he wants last night so now all I have to do is to figure out how to pay for them. For a street strip truck would you guys go 4 or 6 inches wide in the front? I am gonna run a skinny volkswagon type tire.

KQQL IT · 08-08-2011, 08:50 AM

Good luck with a 5x5 narrower than 7" unless you order them from centerline or get a p/n from centerline. And go thru summit.
At least it was that way last time i was looking for new wheels.
and your guys build looks great.
Posted via Mobile Device

djracer · 08-08-2011, 10:00 AM

I think they are in stock at both.
Posted via Mobile Device

djracer · 08-11-2011, 10:48 PM

You have to love a Dumb AZZ parts guy. I ordered a water pump for a 67 corvette with a 427 and the A-holes sent me a small block water pump. I have a long Chrome Water pump
but All my brackets are for a short pump. I wanted to mock up the brackets but I have to have the pump first.

Marv D · 08-11-2011, 11:15 PM

There just trying to convert you Kevin,, one part at a time

djracer · 08-12-2011, 06:46 AM

I have owned several of both and I like a good small block for a street vehicle. BUT The old saying there is no replacement for displacement holds true. If you want to go fast for less cash buy a FAT MOTOR!

Marv D · 08-12-2011, 09:32 AM

If'n I ever do Kevin,, she is gonna be a big ol pfhat pig. Buddy of mine is wrenching on a PSCA ProNitrous car,, one of Mussi's 603" pfhat girls, DAYYMN that's a lot of motor!!!!

djracer · 08-13-2011, 12:38 AM

Slowly but surely getting there.

djracer · 08-15-2011, 12:07 AM

We now have a flex plate, Trans, Convertor, Carb and Regulator More to come soon.

noonzor · 08-15-2011, 12:09 AM

schweeeet. looks great!

djracer · 08-16-2011, 09:45 PM

A couple of spy photos. Cade hasn't even seen them yet. I am gonna get some skinny street tires put on them tomorrow.

1Bad62Pro/Street · 08-16-2011, 11:18 PM

Quote:

Originally Posted by djracer

You have to love a Dumb AZZ parts guy. I ordered a water pump for a 67 corvette with a 427 and the A-holes sent me a small block water pump. I have a long Chrome Water pump
but All my brackets are for a short pump. I wanted to mock up the brackets but I have to have the pump first.

Was it O'Reilly Auto Parts? Dad went back and forth with them 3 times untill he got the right one.... that worked. Even gave us one with reverse flow! What tha frig? Autozone is getting just as bad. If it isn't on the computer they have no clue. Cross reference this cross referance that...
Never had any trouble with Summit or Jegs!
Makes you wanna Hulk Out

You Tube

djracer · 08-16-2011, 11:29 PM

Most of the parts guys and girls blow these days.

KQQL IT · 08-17-2011, 12:17 AM

What width did you get.
Posted via Mobile Device

djracer · 08-17-2011, 06:18 AM

15x6 fronts and the 15x12 rears are ordered.

08-04-2011, 12:04 AM	#76
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: DJ JR's Build Thread haha, shouldnt he be happier about this whole deal? he looks upset to be dirty haha. __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

08-04-2011, 10:10 PM	#77
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread I would be as happy as a puppy with two peckers. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-06-2011, 06:26 PM	#78
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Motor is in the hole. We will try for the transmission tomorrow. Pics to come. We have to go Dj tonight to support our Habits! LOL __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-07-2011, 04:02 PM	#80
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread More pics Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-07-2011, 04:04 PM	#81
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Continued... Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-07-2011, 10:07 PM	#82
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,256	Re: DJ JR's Build Thread Dj ive got a extra manual box. Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

08-07-2011, 11:33 PM	#83
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Thanks but I think I can get one from pull a part for cheap. I need to find one of those and a van tilt. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-08-2011, 07:42 AM	#85
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread kool tell him If he needs anything to call me I know a ton of people in the area. I have been here since 76. 334six575583. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-08-2011, 07:47 AM	#86
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Cade picked out the wheels he wants last night so now all I have to do is to figure out how to pay for them. For a street strip truck would you guys go 4 or 6 inches wide in the front? I am gonna run a skinny volkswagon type tire. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-08-2011, 08:50 AM	#87
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,256	Re: DJ JR's Build Thread Good luck with a 5x5 narrower than 7" unless you order them from centerline or get a p/n from centerline. And go thru summit. At least it was that way last time i was looking for new wheels. and your guys build looks great. Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

08-08-2011, 10:00 AM	#88
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread I think they are in stock at both. Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-11-2011, 10:48 PM	#89
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread You have to love a Dumb AZZ parts guy. I ordered a water pump for a 67 corvette with a 427 and the A-holes sent me a small block water pump. I have a long Chrome Water pump but All my brackets are for a short pump. I wanted to mock up the brackets but I have to have the pump first. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-11-2011, 11:15 PM	#90
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: DJ JR's Build Thread There just trying to convert you Kevin,, one part at a time __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.

08-12-2011, 06:46 AM	#91
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread I have owned several of both and I like a good small block for a street vehicle. BUT The old saying there is no replacement for displacement holds true. If you want to go fast for less cash buy a FAT MOTOR! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-12-2011, 09:32 AM	#92
Marv D Registered Truck Offender Join Date: May 2008 Location: hells training ground (aka Ariz) Posts: 3,118	Re: DJ JR's Build Thread If'n I ever do Kevin,, she is gonna be a big ol pfhat pig. Buddy of mine is wrenching on a PSCA ProNitrous car,, one of Mussi's 603" pfhat girls, DAYYMN that's a lot of motor!!!! __________________ Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral.



Register or Log In To remove these advertisements.

08-13-2011, 12:38 AM	#93
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Slowly but surely getting there. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-15-2011, 12:07 AM	#94
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread We now have a flex plate, Trans, Convertor, Carb and Regulator More to come soon. Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-15-2011, 12:09 AM	#95
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: DJ JR's Build Thread schweeeet. looks great! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

08-16-2011, 09:45 PM	#96
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread A couple of spy photos. Cade hasn't even seen them yet. I am gonna get some skinny street tires put on them tomorrow. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-16-2011, 11:29 PM	#98
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread Most of the parts guys and girls blow these days. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

08-17-2011, 12:17 AM	#99
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,256	Re: DJ JR's Build Thread What width did you get. Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

08-17-2011, 06:18 AM	#100
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: DJ JR's Build Thread 15x6 fronts and the 15x12 rears are ordered. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.