Jim Bob a build thread - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VWBeamer · 06-23-2011, 10:30 AM

Do ya'll actually think it looks better painted with a roller. I'd rather have the worn old paint. It adds character. you could have touched it up and waxed it.

The red roller job shouts back woods redneck.

motornut · 06-23-2011, 11:58 AM

with the peeling cracking and over spray....yup
Can't get any more redder......
up here weathered and worn gets rusty
oh and up here blue and white is leafs colours (truck bought about an hour from Toronto)(it's a hockey thing)
and i'm saving it, being a Sens fan (red, black, and white) Ottawa about 6 hours away
Toronto has 11 Stanley Cups since 1927 - none since 1967
Ottawa has 11 Stanley Cups from 1917 - 1934 - none since BUT we didn't have a team from 1934 to 1992

VWBeamer · 06-23-2011, 12:22 PM

It's a sports thing then...

Quote:

Originally Posted by motornut

with the peeling cracking and over spray....yup
Can't get any more redder......
up here weathered and worn gets rusty
oh and up here blue and white is leafs colours (truck bought about an hour from Toronto)(it's a hockey thing)
and i'm saving it, being a Sens fan (red, black, and white) Ottawa about 6 hours away

motornut · 06-23-2011, 01:24 PM

Sure ok
The redneck is what you get from rolling it in the sun
Posted via Mobile Device

kikkegek · 06-23-2011, 03:34 PM

hi John,

what do you mean with "I'm gona try thinning the top coats(after 3/100s)"?
I dont understand

motornut · 06-23-2011, 04:45 PM

3 coats at 100%
then try to thin it out to 80% paint

motornut · 06-26-2011, 11:19 PM

after days of rain we got some sun today
got first coat pass side door and rear
second coat front fenders,hood,drivers door and rear fender

motornut · 06-27-2011, 04:40 PM

didn't go so well
not sure maybe cause i was painting late maybe the dew screwed the shine?

kikkegek · 06-28-2011, 09:01 AM

why?
it doesnt look bad besides the orangepeel skin on pic 3 from the top.

You can get rid of the orangepeel by sanding (if the caot is thick enough) and you can bring the shine up by buffing and polishing the paint...

motornut · 06-28-2011, 10:24 AM

this is the second coat
i'm doing three for sure,
but i'm still seeing blue lol so it might be four
and lol and a "bug pick n sand" between

when i've done it in the past it's been outside and starting early morning
to dry all day
not finish at dusk,would cut down on the UFOs
Unidentified Foreign Objects

under a rain delay today

motornut · 07-01-2011, 08:36 AM

got the second coat now on most of it
cept under the headlights

motornut · 07-01-2011, 08:38 AM

Quote:

Originally Posted by motornut

got the second coat now on most of it
cept under the headlights

white under the GMC factory or otherwise?
i wondered if it was another gate that was white before

motornut · 07-01-2011, 08:44 AM

woke up to dew but i think it's fine

kikkegek · 07-01-2011, 01:20 PM

nice! I cant waite to get started over here!

I got the advise over here to use a wood flooring roller. These have short hard hairs. This way it does not suck up too much paint and doesnt stick too much, thus causing less orange peal...makes sense?

I'll post some pick when I get some results...

thanks for the update john!

motornut · 07-03-2011, 09:08 AM

did some quick work on the lettering
the GMC is gona take some work to get that out

motornut · 07-03-2011, 09:25 AM

did a quick 3rd coat on the hood and some other dull spots and the top of the box

motornut · 07-03-2011, 09:31 AM

i paid about 6 bucks for the red tray and and roller and two rolls
but then went to the dollar store and found them cheaper
havn't had the foam rollers fall apart but the paper ones yes

motornut · 07-03-2011, 09:45 AM

then drove the guys downtown to the hill

motornut · 07-03-2011, 09:49 AM

slight hue difference with the third coat on top of the box sides
get the shine right and BAM worth a million bucks lol

kikkegek · 07-03-2011, 12:44 PM

I think it looks absolutely fine!

good job Jonh!

motornut · 07-05-2011, 06:04 PM

gee got a few scratches
thats ok cause it still needs two more coats
out on tour found a few buildings moving today

79beater · 07-05-2011, 09:32 PM

This web site has alot of information on how to roll it on and look show quality. http://rolledon.forummotion.com/

luifer76 · 07-05-2011, 09:43 PM

truck looks good.....i like them blazers man.....

motornut · 07-06-2011, 08:55 AM

Quote:

Originally Posted by 79beater

This web site has alot of information on how to roll it on and look show quality. http://rolledon.forummotion.com/

thanks I'll check it out,not to worried bout show quality,but I tell ya from 20 feet you can't really tell it's roll on, got quite a few complements on the nice paint.

Quote:

Originally Posted by luifer76

truck looks good.....i like them blazers man.....

thanks I sure am loven it too

kikkegek · 07-07-2011, 02:55 AM

john, did you sand between paintjobs?

06-23-2011, 10:30 AM	#76
VWBeamer Registered User Join Date: Jun 2011 Location: GA Posts: 281	Re: Jim Bob a build thread Do ya'll actually think it looks better painted with a roller. I'd rather have the worn old paint. It adds character. you could have touched it up and waxed it. The red roller job shouts back woods redneck.

06-23-2011, 11:58 AM	#77
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread with the peeling cracking and over spray....yup Can't get any more redder...... up here weathered and worn gets rusty oh and up here blue and white is leafs colours (truck bought about an hour from Toronto)(it's a hockey thing) and i'm saving it, being a Sens fan (red, black, and white) Ottawa about 6 hours away Toronto has 11 Stanley Cups since 1927 - none since 1967 Ottawa has 11 Stanley Cups from 1917 - 1934 - none since BUT we didn't have a team from 1934 to 1992 __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 Last edited by motornut; 06-23-2011 at 04:58 PM.

06-23-2011, 01:24 PM	#79
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread Sure ok The redneck is what you get from rolling it in the sun Posted via Mobile Device __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 Last edited by motornut; 06-23-2011 at 04:58 PM.

06-23-2011, 03:34 PM	#80
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Jim Bob a build thread hi John, what do you mean with "I'm gona try thinning the top coats(after 3/100s)"? I dont understand __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

06-23-2011, 04:45 PM	#81
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread 3 coats at 100% then try to thin it out to 80% paint __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 Last edited by motornut; 06-23-2011 at 04:59 PM.

06-26-2011, 11:19 PM	#82
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread after days of rain we got some sun today got first coat pass side door and rear second coat front fenders,hood,drivers door and rear fender Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 Last edited by motornut; 06-27-2011 at 09:24 AM.

06-27-2011, 04:40 PM	#83
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread didn't go so well not sure maybe cause i was painting late maybe the dew screwed the shine? Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

06-28-2011, 09:01 AM	#84
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Jim Bob a build thread why? it doesnt look bad besides the orangepeel skin on pic 3 from the top. You can get rid of the orangepeel by sanding (if the caot is thick enough) and you can bring the shine up by buffing and polishing the paint... __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

06-28-2011, 10:24 AM	#85
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread this is the second coat i'm doing three for sure, but i'm still seeing blue lol so it might be four and lol and a "bug pick n sand" between when i've done it in the past it's been outside and starting early morning to dry all day not finish at dusk,would cut down on the UFOs Unidentified Foreign Objects under a rain delay today Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 Last edited by motornut; 06-28-2011 at 10:26 AM.

07-01-2011, 08:36 AM	#86
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread got the second coat now on most of it cept under the headlights Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

07-01-2011, 08:44 AM	#88
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread woke up to dew but i think it's fine Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

07-01-2011, 01:20 PM	#89
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Jim Bob a build thread nice! I cant waite to get started over here! I got the advise over here to use a wood flooring roller. These have short hard hairs. This way it does not suck up too much paint and doesnt stick too much, thus causing less orange peal...makes sense? I'll post some pick when I get some results... thanks for the update john! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-03-2011, 09:08 AM	#90
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread did some quick work on the lettering the GMC is gona take some work to get that out Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

07-03-2011, 09:25 AM	#91
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread did a quick 3rd coat on the hood and some other dull spots and the top of the box Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

07-03-2011, 09:31 AM	#92
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread i paid about 6 bucks for the red tray and and roller and two rolls but then went to the dollar store and found them cheaper havn't had the foam rollers fall apart but the paper ones yes Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350



Register or Log In To remove these advertisements.

07-03-2011, 09:45 AM	#93
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread then drove the guys downtown to the hill Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

07-03-2011, 09:49 AM	#94
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread slight hue difference with the third coat on top of the box sides get the shine right and BAM worth a million bucks lol Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

07-03-2011, 12:44 PM	#95
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Jim Bob a build thread I think it looks absolutely fine! good job Jonh! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

07-05-2011, 06:04 PM	#96
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Jim Bob a build thread gee got a few scratches thats ok cause it still needs two more coats out on tour found a few buildings moving today Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

07-05-2011, 09:32 PM	#97
79beater Registered User Join Date: Nov 2010 Location: memphis, TN Posts: 33	Re: Jim Bob a build thread This web site has alot of information on how to roll it on and look show quality. http://rolledon.forummotion.com/ __________________ Arron 79 GMC LWB, 350 Vortec "stolen" 2001 Chevrolet Suburban

07-05-2011, 09:43 PM	#98
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: Jim Bob a build thread truck looks good.....i like them blazers man..... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

07-07-2011, 02:55 AM	#100
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: Jim Bob a build thread john, did you sand between paintjobs? __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

Register or Log In To remove these advertisements.