Dynatech MuscleMaxx Headers

[mooseknuckles]

sweet...we need more info and pics man...

[68GMCCustom]

yes more pics! what oil pan are you running?

[2nd S.O.B.]

BigShoe24, I sent you a pm

[softballnrd27]

Has anyone tried the 70-81 or 67-69 camaro dynatechs on a squarebody? I tried a set of pacesetter headers for a 98-02 F-Body and they didn't fit at all on the driver's side.

[mac72]

Originally Posted by BigShoe24

They worked!

they fit nice dont they

[dkauffman05]

I put some 98-02 e-bay stainless f-body headers on a square body with 1" setback plates and had no prob on the driver side.

[Mr. 250r]

man i have dirty dingo mounts and mine in probably the middle of the slider were like 2 inches away from tranny mine are set almost all the way back and my motor is about 3/4in off the firewall and i can't use the ac unit by any means but i didn't like its dumb lower mount anyways where do yours sit at in the sliders?

[softballnrd27]

Originally Posted by dkauffman05

I put some 98-02 e-bay stainless f-body headers on a square body with 1" setback plates and had no prob on the driver side.

Do you have any pics?

My mounts are pretty close to stock bc I kept my trans in the same spot so I can re-use my current driveshaft.

[nibs]

Hmmm, just wondering if they make the same layout just with smaller primaries... Id like to keep them in the 1 5/8-1 3/4" range.

[mooseknuckles]

so is there a verdict on this??

[dkauffman05]

All i have for a computer is a kindle fire so i have no way of uploading pics. I might be getting a free desktop this weekend and if i do i will try to get some pics Of the headers on.

[mooseknuckles]

I'm askin if the dynotech headers (70-81 camaro) fit on a c10????....and if so do they hang below the frame???

[dkauffman05]

I got my 5.3 dropped in to mock up motor mounts and check header figment. Had to pull my stands just forward of the v8 holes and the headers literally slid right in.

[mooseknuckles]

Originally Posted by dkauffman05

I got my 5.3 dropped in to mock up motor mounts and check header figment. Had to pull my stands just forward of the v8 holes and the headers literally slid right in.

.....and there not hangin below the frame right???

[BigShoe24]

mooseknuckles,

I think they hang below if you running a stock crossmember. I've got a PB crossmember and also raised the trans crossmember and I clear well.

[mooseknuckles]

well...I got a stock crossmember, but I'm also "Z" 3".....so I guess I'm going to find out if they fit soon enough....

[dkauffman05]

I have a stock crosmember so yes the hang down identical to 68gmccustom's pics.

[mooseknuckles]

headers are here....

[dkauffman05]

Make sure you got metric header bolts. Mine came with sae. I called dynatech and they promptly sent new hardware.

[mooseknuckles]

yep...came with m8x 25mm...

[softballnrd27]

When you putting them on?
Posted via Mobile Device

[mooseknuckles]

Originally Posted by softballnrd27

When you putting them on?
Posted via Mobile Device

it's gonna be a little while yet..

[jtp67-72]

[QUOTE=mooseknuckles;5221879]it's gonna be a little while yet..[/QUOT

These are the 70-81 Camaro versions?? thanx...........jim

[mooseknuckles]

[quote=jtp67-72;5221933]

Originally Posted by mooseknuckles

it's gonna be a little while yet..[/QUOT

These are the 70-81 Camaro versions?? thanx...........jim

yep...70-81 camaro...3" collector

[mooseknuckles]

pn# 715-29410