TX Parting out 78 blazer - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ajlezama · 03-18-2012, 09:59 PM

Quote:

Originally Posted by Liddy71

did you every sell the door panels dont need the trim on them

yes panels where sold to fellow board member, thanks for the interest..

**jocko** · 03-19-2012, 12:35 AM

I may have missed it if someone else asked, but I couldn't find any posts where anyone asked - pending a little further description of and the overall cost, incl shipping to 93555 - I'm very interested in the console. Cracks? Drilled holes? Pits in emblem?, etc etc. If nobody else has asked, pls throw me first in line pending the questions.
Thank you!

ajlezama · 03-19-2012, 01:54 PM

Quote:

Originally Posted by jocko

I may have missed it if someone else asked, but I couldn't find any posts where anyone asked - pending a little further description of and the overall cost, incl shipping to 93555 - I'm very interested in the console. Cracks? Drilled holes? Pits in emblem?, etc etc. If nobody else has asked, pls throw me first in line pending the questions.
Thank you!

Its in good shape no cracks. I will post pics later. I will take 150 plus shipping. Let me know if u are still interested. Thanks
Posted via Mobile Device

**jocko** · 03-19-2012, 04:36 PM

Oh. Your 1st post of this thread ("$250 for seats, $350 with console) led me to believe you'd want around $100 for the console, but wanted to confirm that first.

$150 a little rich for my case. Would you take $125 total- shipping included to 93555? If not, I understand. Thanks for the reply.
Posted via Mobile Device

ajlezama · 03-19-2012, 11:14 PM

Quote:

Originally Posted by jocko

Oh. Your 1st post of this thread ("$250 for seats, $350 with console) led me to believe you'd want around $100 for the console, but wanted to confirm that first.

$150 a little rich for my case. Would you take $125 total- shipping included to 93555? If not, I understand. Thanks for the reply.
Posted via Mobile Device

NO sorry, there is someone else on here selling one.. maybe you can try him..

**jocko** · 03-19-2012, 11:23 PM

Ok, thanks. That's why I wanted to check with you rather than just assume $100 from that first post. No worries - completely understand!

JCs72C10 · 03-20-2012, 11:50 AM

Do you still have the vapor canister and mounting bracket?

**71blksuper4x4** · 03-21-2012, 11:13 PM

Paypal sent for blue cargo panels. Thanks Trevor

ajlezama · 03-22-2012, 10:28 AM

Quote:

Originally Posted by 71blksuper4x4

Paypal sent for blue cargo panels. Thanks Trevor

I got ur payment. I will try to ship out today after work. If not first thing in the morning. Thanks
Posted via Mobile Device

68Timber · 03-23-2012, 03:12 PM

Did Liddy71 buy the two pieces of top trim? If it's still available, I'm interested in those and the rear bumper filler panel.

ajlezama · 03-24-2012, 12:10 AM

Quote:

Originally Posted by BRUISER

Did Liddy71 buy the two pieces of top trim? If it's still available, I'm interested in those and the rear bumper filler panel.

no he never reply to me so they are still up for grabs.. let me know if you are interested..

**N2TRUX** · 03-24-2012, 01:52 AM

Any idea what gear ratio it has? I am looking for a 12 bolt 3.73 if you have one.

scottofksu · 03-24-2012, 08:44 AM

I'm looking for a arms and all steering linkages shipped to 68135...

Thanks!
Posted via Mobile Device

ajlezama · 03-24-2012, 09:44 AM

Quote:

Originally Posted by N2TRUX

Any idea what gear ratio it has? I am looking for a 12 bolt 3.73 if you have one.

dont really know, i will check when i get a chance.

ajlezama · 03-25-2012, 12:58 PM

Quote:

Originally Posted by madcow75

I am possibely interested in your kick panels. I would like a couple of pictures thou. I am putting a/c in my truck are they the deluxe kick panels? Did someone cut the holes for the speaker in. Does it have the a/c vacuum valve cover on the pasenger side panel.

here are pics of the kick panels. they need a good cleaning..

madcow75 · 03-25-2012, 03:29 PM

They are not the deluxe kick panels that go to the floor but they are what I need. How much to 14222?

niterider65 · 03-26-2012, 12:15 AM

Hi do you stil have the seats and console ? if so What would the shipping be to 76107 ftw texas ?

ajlezama · 03-26-2012, 02:34 PM

Quote:

Originally Posted by niterider65

Hi do you stil have the seats and console ? if so What would the shipping be to 76107 ftw texas ?

I will check on the price but i know it will be high. Dont really know how greyhound works. But i heard its cheaper that way
Posted via Mobile Device

madcow75 · 03-26-2012, 02:54 PM

Greyhound is for sure the the cheapest route. But what is your cost?

ajlezama · 03-26-2012, 06:00 PM

Quote:

Originally Posted by niterider65

Hi do you stil have the seats and console ? if so What would the shipping be to 76107 ftw texas ?

each seat is about $90 to ship. cause of the weight and size.. so let me know know if you are still interested.. if not no biggie..thanks for the interest anyways.

Blue72slab · 03-26-2012, 10:22 PM

Quote:

Originally Posted by Blue72slab

Here is the piece of the bed I need. Is it a possibility? The picture was taken inside looking at tailgate so this is the drivers side.
Thanks

Any luck on pictures for the piece of the bed I asked about? Shipping would be to 92253. Thanks

luifer76 · 03-27-2012, 10:46 PM

i pm'd you about the lower control arms ....Do you still have them? if so how much shipped to 93536? thanks....

ajlezama · 03-27-2012, 10:52 PM

Quote:

Originally Posted by luifer76

i pm'd you about the lower control arms ....Do you still have them? if so how much shipped to 93536? thanks....

yes i still have them.. i will check on shipping tomorrow..

ajlezama · 03-27-2012, 10:52 PM

Quote:

Originally Posted by Blue72slab

Any luck on pictures for the piece of the bed I asked about? Shipping would be to 92253. Thanks

no sir i have been tied up at work i will try to get to it this week..

scottofksu · 03-27-2012, 11:15 PM

Perhaps I'm confused but I responded to your PM regarding the upper and lower a arms, center link, and idler arm support on Saturday... I haven't heard back from you (I understand you've been busy)... I didn't see any other posts on this thread about the parts I'm interested, which is what lead me to ask about them initially. So, is Lucifer76 ahead of me? Sorry, I'm a bit confused...
Posted via Mobile Device

03-19-2012, 12:35 AM	#77
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Parting out 78 blazer I may have missed it if someone else asked, but I couldn't find any posts where anyone asked - pending a little further description of and the overall cost, incl shipping to 93555 - I'm very interested in the console. Cracks? Drilled holes? Pits in emblem?, etc etc. If nobody else has asked, pls throw me first in line pending the questions. Thank you! Last edited by jocko; 03-19-2012 at 12:47 AM.

03-19-2012, 04:36 PM	#79
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Parting out 78 blazer Oh. Your 1st post of this thread ("$250 for seats, $350 with console) led me to believe you'd want around $100 for the console, but wanted to confirm that first. $150 a little rich for my case. Would you take $125 total- shipping included to 93555? If not, I understand. Thanks for the reply. Posted via Mobile Device

03-19-2012, 11:23 PM	#81
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Parting out 78 blazer Ok, thanks. That's why I wanted to check with you rather than just assume $100 from that first post. No worries - completely understand!

03-20-2012, 11:50 AM	#82
JCs72C10 Registered User Join Date: Jan 2012 Location: Gainesville Posts: 30	Re: Parting out 78 blazer Do you still have the vapor canister and mounting bracket?

03-21-2012, 11:13 PM	#83
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Parting out 78 blazer Paypal sent for blue cargo panels. Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever Last edited by 71blksuper4x4; 03-22-2012 at 07:21 AM.

03-23-2012, 03:12 PM	#85
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Parting out 78 blazer Did Liddy71 buy the two pieces of top trim? If it's still available, I'm interested in those and the rear bumper filler panel. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

03-24-2012, 01:52 AM	#87
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Parting out 78 blazer Any idea what gear ratio it has? I am looking for a 12 bolt 3.73 if you have one. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-24-2012, 08:44 AM	#88
scottofksu Registered User Join Date: Nov 2011 Location: Omaha, Nebraska Posts: 437	Re: Parting out 78 blazer I'm looking for a arms and all steering linkages shipped to 68135... Thanks! Posted via Mobile Device __________________ Travis' Tribute Truck - 65 C10 Frame Up Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=495073

03-25-2012, 03:29 PM	#91
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting out 78 blazer They are not the deluxe kick panels that go to the floor but they are what I need. How much to 14222?

03-26-2012, 12:15 AM	#92
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 624	Re: Parting out 78 blazer Hi do you stil have the seats and console ? if so What would the shipping be to 76107 ftw texas ?

03-26-2012, 02:54 PM	#94
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: Parting out 78 blazer Greyhound is for sure the the cheapest route. But what is your cost?

03-27-2012, 10:46 PM	#97
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: Parting out 78 blazer i pm'd you about the lower control arms ....Do you still have them? if so how much shipped to 93536? thanks.... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

03-27-2012, 11:15 PM	#100
scottofksu Registered User Join Date: Nov 2011 Location: Omaha, Nebraska Posts: 437	Re: Parting out 78 blazer Perhaps I'm confused but I responded to your PM regarding the upper and lower a arms, center link, and idler arm support on Saturday... I haven't heard back from you (I understand you've been busy)... I didn't see any other posts on this thread about the parts I'm interested, which is what lead me to ask about them initially. So, is Lucifer76 ahead of me? Sorry, I'm a bit confused... Posted via Mobile Device __________________ Travis' Tribute Truck - 65 C10 Frame Up Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=495073



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.