Porterbuilt bolt-in IFS subframe for 55-59 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ZR2RICK · 11-18-2013, 11:44 AM

The Porterbuilt site doesn't list any details for this 55-59 set up, anyone know the hub to hub track width?

PBFAB.COM · 11-18-2013, 11:57 AM

Quote:

Originally Posted by ZR2RICK

The Porterbuilt site doesn't list any details for this 55-59 set up, anyone know the hub to hub track width?

With a CPP modular spindle it sets you right at 60" rotor face to rotor face.

Nate

ZR2RICK · 11-18-2013, 02:56 PM

thank you.

ChuckDriver · 11-18-2013, 05:16 PM

Any updates on the coil-over version or rear trailing arm setup?

PBFAB.COM · 11-18-2013, 06:00 PM

Quote:

Originally Posted by ChuckDriver

Any updates on the coil-over version or rear trailing arm setup?

I am working on a few other things that are currently at a higher priority. It is something that won't get bumped up on the list until we start getting some more requests for it.

Nate

ZR2RICK · 11-18-2013, 07:31 PM

Say does anyone know the specs on the Delmo wheels on the orange stepside?

ChuckDriver · 02-05-2014, 11:52 PM

Quote:

Originally Posted by Porterbuilt Street Rods

I am working on a few other things that are currently at a higher priority. It is something that won't get bumped up on the list until we start getting some more requests for it.

Nate

Have you gotten enough requests for it yet?

PBFAB.COM · 02-06-2014, 10:26 AM

Quote:

Originally Posted by ChuckDriver

Have you gotten enough requests for it yet?

Just you!

rsb5772 · 02-06-2014, 11:09 AM

And me! I'd love to have a bolt in. I'm confident in welding one in, but more concerned about making sure everything is square and it drive correct.

ChuckDriver · 05-08-2014, 10:22 PM

Anything new to report?

**Dan in Pasadena** · 05-09-2014, 12:04 AM

Quote:

Originally Posted by ChuckDriver

Anything new to report?

Yeah, are we there yet? Are we there yet? Are we there yet?

Painter D · 05-11-2014, 10:10 AM

Its worth the wait guys, my truck drives awesome and Ive logged some miles on it.

ChuckDriver · 06-13-2014, 10:47 PM

I'm sure Nate and Del want mind me posting these "Classified/Spy shots"!!

Disclaimer: these are actually for a early Ford UniBody, but Nate says the 55-59 Chevy version is very similar!

**Dan in Pasadena** · 06-13-2014, 11:00 PM

Looks like this setup is away high quality but also only for super, uber, ultra low ride height..is that right?

Any chance there will be a more conservative version? I want my truck lower but I do NOT want air ride and I don't want to enter driveways diagonally, and all that bull****. Too old for that stuff now, I need a daily driver after I retire!

PS: Yeah, yeah, I know..."If it's too low you're too old" ha ha. Probably true but I'm still playing with trucks so I'm not THAT old yet.

ChuckDriver · 06-14-2014, 01:46 PM

Should be 5in at the lower rocker/step.

55Cameo · 06-18-2014, 10:04 AM

I'm very interested in the rear trailing arm set up for the task force trucks.

I will be doing some in my truck in the next month or so and would love to see some parts from you guys

lynx5653 · 06-18-2014, 07:14 PM

I would really like to see a kit that would keep stock ride height, not everyone wants truck to sit on the ground.

roger55 · 06-18-2014, 11:01 PM

Quote:

Originally Posted by lynx5653

I would really like to see a kit that would keep stock ride height, not everyone wants truck to sit on the ground.

X2!

I'd like to see a 6-lug option too.

yossarian19 · 06-19-2014, 09:21 AM

Me too. If anything, I want to lift the front of mine 1" to level it out.
I'd thought Porterbuilt said they were working on a less dropped option..?

ChuckDriver · 11-23-2014, 10:52 PM

Bringing this one back to the top, cause I'm happy to say that I've received my PB Coil-over Dropmember for my 57!

Nate and Dave are two great guys that love what they do and it shows in the quality of their product and customer service!

I cant wait to get everything installed under my truck and put some serious miles on it!

Thanks again Nate and Dave!

76er · 11-24-2014, 09:38 AM

To the Porterbuilt guys, since this is made for a specific make and model will it be available with motor mounts already in place to bolt in a sbc or will we still have to mock?

ChuckDriver · 11-24-2014, 02:42 PM

They have mounts for the SB or LS!

ChuckDriver · 11-24-2014, 02:45 PM

Here's the LS mount.

11-18-2013, 11:44 AM	#76
ZR2RICK Registered User Join Date: Apr 2011 Location: Caldwell, Idaho,United States Posts: 143	Re: Porterbuilt bolt-in IFS subframe for 55-59 The Porterbuilt site doesn't list any details for this 55-59 set up, anyone know the hub to hub track width? __________________ Learn to deal with reality, or reality will deal with you.

11-18-2013, 02:56 PM	#78
ZR2RICK Registered User Join Date: Apr 2011 Location: Caldwell, Idaho,United States Posts: 143	Re: Porterbuilt bolt-in IFS subframe for 55-59 thank you. __________________ Learn to deal with reality, or reality will deal with you.

11-18-2013, 05:16 PM	#79
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt bolt-in IFS subframe for 55-59 Any updates on the coil-over version or rear trailing arm setup? __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

11-18-2013, 07:31 PM	#81
ZR2RICK Registered User Join Date: Apr 2011 Location: Caldwell, Idaho,United States Posts: 143	Re: Porterbuilt bolt-in IFS subframe for 55-59 Say does anyone know the specs on the Delmo wheels on the orange stepside? __________________ Learn to deal with reality, or reality will deal with you.

02-06-2014, 11:09 AM	#84
rsb5772 Registered User Join Date: Jun 2009 Location: Deer Park, Texas Posts: 35	Re: Porterbuilt bolt-in IFS subframe for 55-59 And me! I'd love to have a bolt in. I'm confident in welding one in, but more concerned about making sure everything is square and it drive correct.

05-08-2014, 10:22 PM	#85
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt bolt-in IFS subframe for 55-59 Anything new to report? __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

05-11-2014, 10:10 AM	#87
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: Porterbuilt bolt-in IFS subframe for 55-59 Its worth the wait guys, my truck drives awesome and Ive logged some miles on it. __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

06-13-2014, 10:47 PM	#88
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt bolt-in IFS subframe for 55-59 I'm sure Nate and Del want mind me posting these "Classified/Spy shots"!! Disclaimer: these are actually for a early Ford UniBody, but Nate says the 55-59 Chevy version is very similar! Attached Images __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

06-13-2014, 11:00 PM	#89
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,344	Re: Porterbuilt bolt-in IFS subframe for 55-59 Looks like this setup is away high quality but also only for super, uber, ultra low ride height..is that right? Any chance there will be a more conservative version? I want my truck lower but I do NOT want air ride and I don't want to enter driveways diagonally, and all that bull****. Too old for that stuff now, I need a daily driver after I retire! PS: Yeah, yeah, I know..."If it's too low you're too old" ha ha. Probably true but I'm still playing with trucks so I'm not THAT old yet. __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

06-14-2014, 01:46 PM	#90
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt bolt-in IFS subframe for 55-59 Should be 5in at the lower rocker/step. __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

06-18-2014, 10:04 AM	#91
55Cameo Registered User Join Date: Apr 2011 Location: Tucson, Arizona Posts: 151	Re: Porterbuilt bolt-in IFS subframe for 55-59 I'm very interested in the rear trailing arm set up for the task force trucks. I will be doing some in my truck in the next month or so and would love to see some parts from you guys __________________ Build thread:55 Cameo R!! http://67-72chevytrucks.com/vboard/s...d.php?t=519851

06-18-2014, 07:14 PM	#92
lynx5653 Registered User Join Date: Nov 2011 Location: Lagrange,ME Posts: 349	Re: Porterbuilt bolt-in IFS subframe for 55-59 I would really like to see a kit that would keep stock ride height, not everyone wants truck to sit on the ground. __________________ 1955 2nd on 86 chassis Daily driver

06-19-2014, 09:21 AM	#94
yossarian19 Registered User Join Date: Sep 2011 Location: Nevada City, CA Posts: 908	Re: Porterbuilt bolt-in IFS subframe for 55-59 Me too. If anything, I want to lift the front of mine 1" to level it out. I'd thought Porterbuilt said they were working on a less dropped option..? __________________ "Over my head" 1957 Chevy 3200, big rear window & 6 lug. Front disc, power steering, Vortec 4.8 / 4L60E swap, hydro boost brakes & patina.

11-23-2014, 10:52 PM	#95
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt bolt-in IFS subframe for 55-59 Bringing this one back to the top, cause I'm happy to say that I've received my PB Coil-over Dropmember for my 57! Nate and Dave are two great guys that love what they do and it shows in the quality of their product and customer service! I cant wait to get everything installed under my truck and put some serious miles on it! Thanks again Nate and Dave! Attached Images __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

11-24-2014, 09:38 AM	#96
76er Registered User Join Date: Jan 2011 Location: greensboro n.c. Posts: 51	Re: Porterbuilt bolt-in IFS subframe for 55-59 To the Porterbuilt guys, since this is made for a specific make and model will it be available with motor mounts already in place to bolt in a sbc or will we still have to mock?



Register or Log In To remove these advertisements.

11-24-2014, 02:42 PM	#97
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt bolt-in IFS subframe for 55-59 They have mounts for the SB or LS! __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

11-24-2014, 02:45 PM	#98
ChuckDriver A320 Pilot/USAF Retired Join Date: Mar 2009 Location: Charleston, SC Posts: 2,629	Re: Porterbuilt bolt-in IFS subframe for 55-59 Here's the LS mount. Attached Images __________________ JJ My 1957 build: http://67-72chevytrucks.com/vboard/s...d.php?t=334552 http://www.trifive.com/forums/showthread.php?t=22037 Instagram - Chuckdriver57

Register or Log In To remove these advertisements.