working squares lets see them - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GM72K10 · 12-22-2013, 01:03 PM

My ex fire truck now dump dumping infield mix on the ball field in the spring. Also hauls sand, stone, lumber, tile, kids stuff to college and back, and auction finds.
Its a keeper.

pontiac6269 · 12-25-2013, 03:08 PM

Here's my 85 K5 after plowing the driveway.

meatwagon83 · 12-30-2013, 07:48 PM

Malo83 · 12-30-2013, 08:56 PM

Quote:

Originally Posted by motornut

I guess this was workin the 79....
new BBQ etc for the trailer

That's my kind of working truck!

cam.man67 · 12-30-2013, 08:57 PM

Lester hauling a small load of wood:

http://www.youtube.com/watch?v=im80T5aRY0A

cam.man67 · 01-03-2014, 08:38 AM

Hauleda hay bale at my rental farm out into the field for the heifers. Thank goodness the ground was frozen because these tires are not very good!

**texassquarebodies** · 01-03-2014, 07:37 PM

My 87' 3/4 ton, 350 tbi truck. Pullin another square home !

obijuan · 01-03-2014, 10:51 PM

great thread!!! heres my dually making me some money.

heres a blazer trying to cable my dead rig up the hill, pulled the rear tires off the ground a few feet.

get an idea of the hill, heres me standing on the brakes, no start. dry carb. bad timing.

meatwagon83 · 01-04-2014, 09:23 AM

your dually is so awesome i have pics of it on my phone

GM72K10 · 01-22-2014, 07:22 AM

""Working" last night.

4x4k30 · 01-22-2014, 08:05 AM

my 79 can tow even with them big ole tires

stampy · 01-22-2014, 11:14 AM

Love the 79! ^^^

Here's my 79 before I started the disassembly! Used it to do a little bit of plowing, and haul my wifes buck out of the bush

Don't mind that kind of "work"!

ray_mcavoy · 01-22-2014, 03:24 PM

Quote:

Originally Posted by 4x4k30

my 79 can tow even with them big ole tires

Nice 79!! Reminds me of my uncle's 79 K20. Here's an old pic from back in the early 80's of his truck hauling a load of firewood:

He still owns it and uses it regularly to plow snow, haul wood, etc.

Kaysen · 01-23-2014, 10:09 AM

Obijuan, that truck looks mean as all get out! I like it!

Here's a pic of a small batch of firewood this past fall I gathered in my k5.

GM72K10 · 01-29-2014, 07:03 AM

Got a M101a2 to go with the dually CUCV, finally got the lights wired up and actually used it yesterday for a little "work" and "play"

GM72K10 · 01-29-2014, 07:05 AM

As bought, racks inside have since been removed. Needs a good coat of OD in the spring.

comegetsome2003 · 01-29-2014, 10:01 AM

Non-square working hard so the squares could have a break on the way home from a long day of grudge racing

**truckfan** · 02-02-2014, 02:38 PM

Anyone got one of these?

**Palf70Step** · 02-02-2014, 06:31 PM

That is kool!

legendman · 02-03-2014, 02:30 PM

Appropriate for this time of year, my old K20 clearing the driveway

INSIDIOUS '86 · 02-04-2014, 04:18 AM

About 4700lbs of blazer. 600lbs of tires tools and parts and crap in the bed and a LB9 305 with headers a summit 1102 cam and a performer rpm topped with a demon 650vs. Pulled it without using low gear. Not bad considering it's only running 3:07s in back. Didn't phase it at all. Love taking stereotypes and kicking them in the chin.

fourfiftyfour · 02-06-2014, 01:07 PM

Haulin a load to the dump

natedogg · 02-06-2014, 08:49 PM

We load a lot of trucks at my job and this nice looking square body rolled in today. I get a lil excited when I see a square body.

fourfiftyfour · 02-07-2014, 12:33 AM

Quote:

Originally Posted by natedogg

We load a lot of trucks at my job and this nice looking square body rolled in today. I get a lil excited when I see a square body.

My dream rig right there! nice one

84chevyguyid · 02-07-2014, 09:36 AM

Here's my 84 hauling a load of hay to the neighbor's feedlot. About 7 tons of hay on the trailer.

12-22-2013, 01:03 PM	#76
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: working squares lets see them My ex fire truck now dump dumping infield mix on the ball field in the spring. Also hauls sand, stone, lumber, tile, kids stuff to college and back, and auction finds. Its a keeper. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

12-25-2013, 03:08 PM	#77
pontiac6269 Registered User Join Date: Mar 2004 Location: Sparta, WI Posts: 86	Re: working squares lets see them Here's my 85 K5 after plowing the driveway. Attached Images __________________ Eric 2001 Ford F350 EC dually 7.3 1981 Chevy C20 to K20 350 1978 Oldsmobile Cutlass Supreme 455 Pontiac 1969 Pontiac GTO 400

12-30-2013, 07:48 PM	#78
meatwagon83 Registered User Join Date: Dec 2012 Location: Preble county ohio Posts: 1,914	Re: working squares lets see them __________________ "DON'T TOUCH THE TRIM!!"-Early Kyler

01-03-2014, 08:38 AM	#81
cam.man67 Registered User Join Date: Jun 2010 Location: Jefferson, MD Posts: 2,397	Re: working squares lets see them Hauleda hay bale at my rental farm out into the field for the heifers. Thank goodness the ground was frozen because these tires are not very good! Attached Images __________________ '68 Dodge Dart 270, 225, 904, 2.76--"Lucy" 1996 Gmc 1500 Z71, 350, 4l60e, 3.73s 1995 Jeep Wrangler Rio Grande 2.5, AX5, 4.10s 1989 Toyota Pickup 22re, auto, 3.73

01-03-2014, 07:37 PM	#82
texassquarebodies Truck Nut Join Date: Jun 2007 Location: Wills Point, Texas Posts: 407	Re: working squares lets see them My 87' 3/4 ton, 350 tbi truck. Pullin another square home ! Attached Images __________________ Tony Kee Texas Square Bodies

01-03-2014, 10:51 PM	#83
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: working squares lets see them great thread!!! heres my dually making me some money. heres a blazer trying to cable my dead rig up the hill, pulled the rear tires off the ground a few feet. get an idea of the hill, heres me standing on the brakes, no start. dry carb. bad timing. Last edited by obijuan; 01-03-2014 at 10:59 PM.

01-04-2014, 09:23 AM	#84
meatwagon83 Registered User Join Date: Dec 2012 Location: Preble county ohio Posts: 1,914	Re: working squares lets see them your dually is so awesome i have pics of it on my phone __________________ "DON'T TOUCH THE TRIM!!"-Early Kyler

01-22-2014, 07:22 AM	#85
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: working squares lets see them ""Working" last night. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

01-22-2014, 08:05 AM	#86
4x4k30 Registered User Join Date: Jun 2003 Location: ga Posts: 630	Re: working squares lets see them my 79 can tow even with them big ole tires Attached Images __________________ 4x4k30 if trouble was money i would have plenty

01-22-2014, 11:14 AM	#87
stampy Registered User Join Date: Mar 2013 Location: Eganville, Ontario Posts: 38	Re: working squares lets see them Love the 79! ^^^ Here's my 79 before I started the disassembly! Used it to do a little bit of plowing, and haul my wifes buck out of the bush Don't mind that kind of "work"! Attached Images

01-23-2014, 10:09 AM	#89
Kaysen Registered User Join Date: Dec 2013 Location: Marietta, OK Posts: 277	Re: working squares lets see them Obijuan, that truck looks mean as all get out! I like it! Here's a pic of a small batch of firewood this past fall I gathered in my k5. Attached Images

01-29-2014, 07:03 AM	#90
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: working squares lets see them Got a M101a2 to go with the dually CUCV, finally got the lights wired up and actually used it yesterday for a little "work" and "play" Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

01-29-2014, 07:05 AM	#91
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: working squares lets see them As bought, racks inside have since been removed. Needs a good coat of OD in the spring. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

01-29-2014, 10:01 AM	#92
comegetsome2003 Registered User Join Date: Dec 2012 Location: Baxley Ga Posts: 83	Re: working squares lets see them Non-square working hard so the squares could have a break on the way home from a long day of grudge racing __________________ 1991 Square CCLB Dually...laid out on 22s with an old noisy 12 valve

02-02-2014, 02:38 PM	#93
truckfan Senior Member Join Date: Apr 2009 Location: Lawrence KS Posts: 821	Re: working squares lets see them Anyone got one of these? Attached Images __________________ 1981 Chevy C30 440 Holmes 42K one owner miles



Register or Log In To remove these advertisements.

02-02-2014, 06:31 PM	#94
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,269	Re: working squares lets see them That is kool! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

02-04-2014, 04:18 AM	#96
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: working squares lets see them About 4700lbs of blazer. 600lbs of tires tools and parts and crap in the bed and a LB9 305 with headers a summit 1102 cam and a performer rpm topped with a demon 650vs. Pulled it without using low gear. Not bad considering it's only running 3:07s in back. Didn't phase it at all. Love taking stereotypes and kicking them in the chin. __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

02-06-2014, 01:07 PM	#97
fourfiftyfour Registered User Join Date: Dec 2013 Location: victoria Posts: 32	Re: working squares lets see them Haulin a load to the dump

02-06-2014, 08:49 PM	#98
natedogg Registered User Join Date: Dec 2013 Location: West, TN Posts: 312	Re: working squares lets see them We load a lot of trucks at my job and this nice looking square body rolled in today. I get a lil excited when I see a square body. Attached Images

02-07-2014, 09:36 AM	#100
84chevyguyid Registered User Join Date: Feb 2012 Location: Mud Lake, Idaho Posts: 347	Re: working squares lets see them Here's my 84 hauling a load of hay to the neighbor's feedlot. About 7 tons of hay on the trailer. Attached Images

Register or Log In To remove these advertisements.