CA 73-91 K5 Blazer Jimmy rear sill scuff plates NEW

[Irish1941]

Just rear one right now.
Virus is killing me...cant get anything done.
Anyway I did get some HD tubes that seems to be strong enough so good to go.
Have 12 packed and ready to go out.

[60burb4me]

i sent the money but forgot to put in
73-91 k5 blazer jimmy rear sill cuff plates new
My name is Sean. please let me know you received it and we are good.
thank you

[Irish1941]

Originally Posted by 60burb4me

i sent the money but forgot to put in
73-91 k5 blazer jimmy rear sill cuff plates new
My name is Sean. please let me know you received it and we are good.
thank you

All good. Going out today. Thanks again!

[Irish1941]

bump..
I have 73-77 front floor plates ready as well.
Thanks

[mrbuck]

Do you make a sill plate for the step behind the front seats? If so how much for the pair.

[Hayward carter]

Originally Posted by Irish1941

TTT
Sold out for now. Many thanks to all those who got one.
I may do 2nd run in next few weeks.
I do have a few with minor scratches. Most could be sanded and polished out.
If you need something not 100% show truck, send me a PM.
$80 shipped in lower 48.

Posted via Mobile Device

[Hayward carter]

Originally Posted by Hayward carter

Posted via Mobile Device

Hello just checking to see if you have any rear sill scuff plates available for a K5 Blazer ??

Thanks
Posted via Mobile Device

[Andystoy91]

Originally Posted by Irish1941

*BACK IN STOCK. Shipping March 12th, 2020! GO TO LAST PAGE!
After a lot of false starts over last few yrs, , pretty stoked I finally got these ready to go. It's a fairly complex piece to make but I'm happy with way they turned out. I'm real picky when it comes to my truck and wanted a product that I would I buy.

These fit all full size Blazers & Jimmy from 1973 to 1991. I checked those against a bunch of trucks and against several plates.
The 73-91 rear scuff plate is often trashed and just plain missing and NOS is long gone and not cheap if you do find one.

Made in right here in California from US material.
Not made overseas whatsoever!

I made them thicker than the originals so they are a little more dent resistant and also made rear lip that sits on the carpet longer so carpet stays put.
They come covered in protective vinyl with a mill finish that matches original but can be polished to a mirror if thats look you want.
I will also be including proper GM small head oval #8 screws with the plate.
Plate works best on fresh carpet or rubber mat with underlay. They work fine on old carpet but sometimes they can get caught under the tail gate if carpet is really mashed down. Flattened carpet can put plate at wrong angle.

They are NOW $110 shipped anywhere in lower 48.
Look over the pix and PM or reply here with questions.
Installed in another members K5 who was part of the in field testing team.



Before pix in my official test mule!

After

Profile. Top is GM bottom is my plate.

I’d like to order one for a 88 k5 blazer please?

[Hayward carter]

Originally Posted by Hayward carter

Posted via Mobile Device

If you have any with scratches on it I’ll buy one of those as well.

Thanks
Posted via Mobile Device

[Stripe96]

Originally Posted by Irish1941

And shipped. Thanks again.

Good morning
I’m interested in purchasing a rear sill scuff plate for 1986 Chevy k5 Blazer. Please quote. 46124 zip code. Thank you
Posted via Mobile Device

[yote1234]

i need one for my 76 plz

[Keeks2915]

I would like one please for 1980 Jimmy to 48040

[Sabaka454]

I think eBay is where he is selling these

[bigschuss]

Just FYI....Irish has not been on the forum since last summer, which was when I bought one from him. And the one I got was just about the last one he had. In fact, it was one of his prototypes and didn't fit 100% correctly. I had to have a local machine shop fix some of the bends to get it to fit.

I spoke with Irish on the phone last summer...the guy on Ebay selling these is not Irish.

[Sabaka454]

I believe he's Italian

[Coolbilly]

Originally Posted by Irish1941

*BACK IN STOCK. Shipping March 12th, 2020! GO TO LAST PAGE!
After a lot of false starts over last few yrs, , pretty stoked I finally got these ready to go. It's a fairly complex piece to make but I'm happy with way they turned out. I'm real picky when it comes to my truck and wanted a product that I would I buy.

These fit all full size Blazers & Jimmy from 1973 to 1991. I checked those against a bunch of trucks and against several plates.
The 73-91 rear scuff plate is often trashed and just plain missing and NOS is long gone and not cheap if you do find one.

Made in right here in California from US material.
Not made overseas whatsoever!

I made them thicker than the originals so they are a little more dent resistant and also made rear lip that sits on the carpet longer so carpet stays put.
They come covered in protective vinyl with a mill finish that matches original but can be polished to a mirror if thats look you want.
I will also be including proper GM small head oval #8 screws with the plate.
Plate works best on fresh carpet or rubber mat with underlay. They work fine on old carpet but sometimes they can get caught under the tail gate if carpet is really mashed down. Flattened carpet can put plate at wrong angle.

They are NOW $110 shipped anywhere in lower 48.
Look over the pix and PM or reply here with questions.
Installed in another members K5 who was part of the in field testing team.



Before pix in my official test mule!

After

Profile. Top is GM bottom is my plate.

Posted via Mobile Device

[Coolbilly]

I’d like to purchase one of your 73-91 rear scuff plate
Let me know what I need to do.
Posted via Mobile Device

[BWheels]

Originally Posted by bigschuss

Just FYI....Irish has not been on the forum since last summer, which was when I bought one from him. And the one I got was just about the last one he had. In fact, it was one of his prototypes and didn't fit 100% correctly. I had to have a local machine shop fix some of the bends to get it to fit.

I spoke with Irish on the phone last summer...the guy on Ebay selling these is not Irish.

Do you still have his phone number? I'd love to see if he has a front scuff plate available.