Post your C/L - Facebook finds for everyone to enjoy! - Page 47 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

_Ogre · 08-12-2023, 05:44 PM

well worth the price just for the rust free cab

1project2many · 08-12-2023, 06:35 PM

This one's very cool imo
https://www.facebook.com/marketplace...26719595449339

**mr48chev** · 08-13-2023, 10:43 PM

56 GMC fire truck in Dufur Oregon, For the TF fans the ultimate grandkid hauler for local parades. https://www.facebook.com/marketplace...type=top_picks

daveshilling · 08-22-2023, 12:17 PM

I have a real treat for yall today!

https://sfbay.craigslist.org/eby/cto...647713435.html

Has a General Diesel with very little run time. 4 speed with a 2 speed rear end. Brakes on all axles. Custom frame. Doors close like new. No rust, very solid. Have all the parts in the bed. Many are NOS, with receipts. Clean title. On non ops. Ran a couple years ago off a can. Needs new aluminum tank fuel tank installed and battery. Trades considered for enclosed car trailer.

**mr48chev** · 08-24-2023, 01:21 AM

That is one solid looking truck but if it were sitting in my garage it would be loosing that tag axle. I hope no one gets offended If I say that it looks like it has old semi truck driver written all over it. The potential though

nvrdone · 08-24-2023, 11:17 AM

I'd keep it like it is just for the conversation value.

**mr48chev** · 08-24-2023, 06:06 PM

Things like that without a real working purpose always tell me that the builder doesn't think the vehicle will get enough attention on it's own without something to add some bubba factor.

When you walk around the local car show and see the car with the drive in tray on the window with fake burger and drink mug on it or the drive in speaker stand next to it or other trinkets set out for display those tell me that the owner doesn't think the car will get enough attention on it's own merit. Same as the guy who has to start his engine and gun it several times every half hour on the half hour.

Chopped53 · 08-29-2023, 07:43 PM

$500 (CAD)

https://www.kijiji.ca/v-classic-cars...cab/1669506078

**mr48chev** · 08-29-2023, 08:53 PM

Right in your backyard.

**mr48chev** · 09-10-2023, 01:08 AM

47/48 Chevy parts truck Big long wheel base rig with a pretty nice looking cab and doors from what I can tell.
At 300 this might be a deal for somone in the PNW looking for a cab. I don't have the extra money or I'd buy it and turn the frame into a frame table.

Close to Zillah Wa.

**Dan in Pasadena** · 09-11-2023, 10:22 PM

No engine but a three speed manual trans in the bed. Worth every cent I think at today's prices.

Rust doesn't look too bad, dash uncut, can't quite see if there's cancer under the cab eyebrow.

**mr48chev** · 09-12-2023, 06:07 PM

Washington plates on that one. The value on that one might be the rust it doesn't look like you will have to fight.

**mr48chev** · 09-12-2023, 06:43 PM

56 Big window short box 3600 Cab on a 3100 frame . Hood River Oregon.A pretty solid looking big window project starter. https://www.facebook.com/marketplace...d-bfb11bad9c57

**mr48chev** · 09-12-2023, 10:43 PM

This is basically a 50 cab with a clear title and a bunch of mix match parts but the cab doesn't look all that terrible. Rough 54 front fenders on it.

https://www.facebook.com/marketplace...d-bfb11bad9c57

In Sandy Oregon.

fauXGT · 09-12-2023, 11:05 PM

Quote:

Originally Posted by mr48chev

This is basically a 50 cab with a clear title and a bunch of mix match parts but the cab doesn't look all that terrible. Rough 54 front fenders on it.

https://www.facebook.com/marketplace...d-bfb11bad9c57

In Sandy Oregon.

Looks like Mr's project has turned into yard art..... and Mrs wants it finally gone.

**mr48chev** · 09-12-2023, 11:12 PM

[QUOTE=fauXGT;9240021]Looks like Mr's project has turned into yard art..... and Mrs wants it finally gone quote]

I wouldn't argue that point for a second, It might be the left overs from a build with a title too. If I had the extra money, I'd buy it for the cab and title if they match, and stick the cab on my old frame. I've got enough pieces laying around to pretty well put a truck together that someone might decide they liked.

**mr48chev** · 09-12-2023, 11:16 PM

It must be sell your project in the PNW and this one is real interesting even with the 11K price tag. 58 Cameo in a basket with what may be original paint.

https://www.facebook.com/marketplace...d-bfb11bad9c57

In or near Olympia Wa.

**mr48chev** · 09-12-2023, 11:37 PM

This add has been up for 13 weeks so he may have sold this batch of cabs and parts already.It would take some serious hauling to get it all out of there though.

It looks like he had plans to put AD trucks together on S-10 frames at one time.

https://www.facebook.com/marketplace...d-bfb11bad9c57

**Rickysnickers** · 09-12-2023, 11:50 PM

I didn't get a photo of it, but I saw a 10700 dump truck for sale today. It was $6200. It's here in Star ID. It looked to be in really nice shape!!! Maybe I'll go by and get a photo at a later date.

**mr48chev** · 09-13-2023, 12:46 AM

Running, driving and functioning dump trucks or flatbeds with hoists give your wives too many ideas for honeydoos. That isn't a bad thing but it can keep you busy doing around the place things rather than what you would rather be doing.

**mr48chev** · 09-16-2023, 12:11 PM

Slick little sectioned 51 Chevy with the back end of a burb for a bed in Wenachee Wa.

https://www.facebook.com/marketplace...type=top_picks

The listing is 6 weeks old so he either sold it or is still waiting for the FI unit to come back Price isn't bad for the list of parts on it.

_Ogre · 09-17-2023, 12:47 PM

ogre wants! i'd put my cab on that bad boy. trim looks like it's mostly there

**jweb** · 09-18-2023, 10:23 AM

If I had space I would go get this one:
https://portland.craigslist.org/clc/...667122961.html

_Ogre · 09-18-2023, 12:19 PM

idk... $8k for a basket case is a little extreme

**jweb** · 09-18-2023, 12:28 PM

Quote:

Originally Posted by _Ogre

idk... $8k for a basket case is a little extreme

The ad is hard to read. He wants $4500 for the truck, $8000 for the motor/trans.

08-12-2023, 05:44 PM	#1151
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Post your C/L - Facebook finds for everyone to enjoy! well worth the price just for the rust free cab __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

08-12-2023, 06:35 PM	#1152
1project2many Registered User Join Date: Mar 2012 Location: Lakes Region NH Posts: 3,200	Re: Post your C/L - Facebook finds for everyone to enjoy! This one's very cool imo https://www.facebook.com/marketplace...26719595449339

08-13-2023, 10:43 PM	#1153
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! 56 GMC fire truck in Dufur Oregon, For the TF fans the ultimate grandkid hauler for local parades. https://www.facebook.com/marketplace...type=top_picks Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-22-2023, 12:17 PM	#1154
daveshilling Registered User Join Date: Jan 2013 Location: roseville Posts: 823	Re: Post your C/L - Facebook finds for everyone to enjoy! I have a real treat for yall today! https://sfbay.craigslist.org/eby/cto...647713435.html Has a General Diesel with very little run time. 4 speed with a 2 speed rear end. Brakes on all axles. Custom frame. Doors close like new. No rust, very solid. Have all the parts in the bed. Many are NOS, with receipts. Clean title. On non ops. Ran a couple years ago off a can. Needs new aluminum tank fuel tank installed and battery. Trades considered for enclosed car trailer. Attached Images __________________ My Current Trucks: 1958 Apache BBW 4.8LS/4l60 "Lucky" Built By Me 1958 GMC BBW LS1/4l60 "The Kraken" Built By Delmo

08-24-2023, 01:21 AM	#1155
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! That is one solid looking truck but if it were sitting in my garage it would be loosing that tag axle. I hope no one gets offended If I say that it looks like it has old semi truck driver written all over it. The potential though __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-24-2023, 11:17 AM	#1156
nvrdone Registered User Join Date: Dec 2011 Location: Moxee WA Posts: 1,482	Re: Post your C/L - Facebook finds for everyone to enjoy! I'd keep it like it is just for the conversation value. __________________ 49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's Bought in 1973 for $235.00. Had it longer than my wife & Kids!!

08-24-2023, 06:06 PM	#1157
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! Things like that without a real working purpose always tell me that the builder doesn't think the vehicle will get enough attention on it's own without something to add some bubba factor. When you walk around the local car show and see the car with the drive in tray on the window with fake burger and drink mug on it or the drive in speaker stand next to it or other trinkets set out for display those tell me that the owner doesn't think the car will get enough attention on it's own merit. Same as the guy who has to start his engine and gun it several times every half hour on the half hour. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

08-29-2023, 07:43 PM	#1158
Chopped53 Registered User Join Date: Jul 2019 Location: Calgary, Alberta Posts: 81	Re: Post your C/L - Facebook finds for everyone to enjoy! $500 (CAD) https://www.kijiji.ca/v-classic-cars...cab/1669506078

08-29-2023, 08:53 PM	#1159
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! Right in your backyard. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-10-2023, 01:08 AM	#1160
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! 47/48 Chevy parts truck Big long wheel base rig with a pretty nice looking cab and doors from what I can tell. At 300 this might be a deal for somone in the PNW looking for a cab. I don't have the extra money or I'd buy it and turn the frame into a frame table. Close to Zillah Wa. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-11-2023, 10:22 PM	#1161
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,343	Re: Post your C/L - Facebook finds for everyone to enjoy! No engine but a three speed manual trans in the bed. Worth every cent I think at today's prices. Rust doesn't look too bad, dash uncut, can't quite see if there's cancer under the cab eyebrow. Attached Images __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

09-12-2023, 06:07 PM	#1162
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! Washington plates on that one. The value on that one might be the rust it doesn't look like you will have to fight. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-12-2023, 06:43 PM	#1163
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! 56 Big window short box 3600 Cab on a 3100 frame . Hood River Oregon.A pretty solid looking big window project starter. https://www.facebook.com/marketplace...d-bfb11bad9c57 Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-12-2023, 10:43 PM	#1164
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! This is basically a 50 cab with a clear title and a bunch of mix match parts but the cab doesn't look all that terrible. Rough 54 front fenders on it. https://www.facebook.com/marketplace...d-bfb11bad9c57 In Sandy Oregon. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-12-2023, 11:12 PM	#1166
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! [QUOTE=fauXGT;9240021]Looks like Mr's project has turned into yard art..... and Mrs wants it finally gone quote] I wouldn't argue that point for a second, It might be the left overs from a build with a title too. If I had the extra money, I'd buy it for the cab and title if they match, and stick the cab on my old frame. I've got enough pieces laying around to pretty well put a truck together that someone might decide they liked. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

09-12-2023, 11:16 PM	#1167
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! It must be sell your project in the PNW and this one is real interesting even with the 11K price tag. 58 Cameo in a basket with what may be original paint. https://www.facebook.com/marketplace...d-bfb11bad9c57 In or near Olympia Wa. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-12-2023, 11:37 PM	#1168
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! This add has been up for 13 weeks so he may have sold this batch of cabs and parts already.It would take some serious hauling to get it all out of there though. It looks like he had plans to put AD trucks together on S-10 frames at one time. https://www.facebook.com/marketplace...d-bfb11bad9c57 Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-12-2023, 11:50 PM	#1169
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,060	Re: Post your C/L - Facebook finds for everyone to enjoy! I didn't get a photo of it, but I saw a 10700 dump truck for sale today. It was $6200. It's here in Star ID. It looked to be in really nice shape!!! Maybe I'll go by and get a photo at a later date.

09-13-2023, 12:46 AM	#1170
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! Running, driving and functioning dump trucks or flatbeds with hoists give your wives too many ideas for honeydoos. That isn't a bad thing but it can keep you busy doing around the place things rather than what you would rather be doing. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-16-2023, 12:11 PM	#1171
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,709	Re: Post your C/L - Facebook finds for everyone to enjoy! Slick little sectioned 51 Chevy with the back end of a burb for a bed in Wenachee Wa. https://www.facebook.com/marketplace...type=top_picks The listing is 6 weeks old so he either sold it or is still waiting for the FI unit to come back Price isn't bad for the list of parts on it. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

09-17-2023, 12:47 PM	#1172
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Post your C/L - Facebook finds for everyone to enjoy! ogre wants! i'd put my cab on that bad boy. trim looks like it's mostly there __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

09-18-2023, 10:23 AM	#1173
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,208	Re: Post your C/L - Facebook finds for everyone to enjoy! If I had space I would go get this one: https://portland.craigslist.org/clc/...667122961.html Attached Images __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt

09-18-2023, 12:19 PM	#1174
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Post your C/L - Facebook finds for everyone to enjoy! idk... $8k for a basket case is a little extreme __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

Register or Log In To remove these advertisements.