The first ever 73-91 Burb post your ride thread! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

85raiderburban · 08-21-2016, 09:31 PM

cleaned up the new tires I bought for her, the others were dry rotted. The red LED digital gauge is for trans temp (700r4 swap). I replaced that one with a needle one now. The other is a tach. LED lighting for the cluster also.

85raiderburban · 08-21-2016, 09:51 PM

Swapped out the Edelbrock 1406. It wasn't supplying enough air/fuel for the 454. '86 non cc Quadrajet off of an RV 7.4 is now in it's place with an adapter plate to the (Edelbrock c454) intake. The power steering filler neck is from a newer Trailblazer. Throttle/TV cable set up with $8 bracket.

Factory carbed air cleaner from another parted truck with hose to the front grill for forced air induction. It fits under the hood with about half an inch clearance

basher13 · 03-26-2017, 04:15 PM

New to me, had to make sure the 4wd worked!

basher13 · 03-27-2017, 01:20 PM

Back in November exploring the other side of the state.

Nodnarb76 · 04-07-2017, 09:33 AM

Quote:

Originally Posted by basher13

Back in November exploring the other side of the state.

very cool!

basher13 · 04-09-2017, 01:50 PM

What's the WARN motto? Go Prepared! Well I didn't...putting together my recovery kit today. Good times!

Country Suburban 4x4 · 04-09-2017, 02:31 PM

My 1983 GMC K2500 Suburban. 29,000 original miles currently, 350 bored 30 over, edelbrock aluminum heads and intake, comp cam roller rockers, headers, mild cam. TH400 tranny, GM 14 bolt rear, Dana 44 front, 4.10 gears with an NP208 transfer case. When I get done with college next year, I will be pulling the engine and most likely building a 383 stroker, but I've got some time to plan. I've had this truck since I got my learner's permit at 15 years old and it has been a blast building it with my father, lots of great memories. The old burban goes by "Clifford".
The day I became the 2nd owner:
Name: IMG_0304.jpg
Views: 325
Size: 44.5 KB

Name: IMG_0304.jpg
Views: 325
Size: 44.5 KB

Here she is now:
Name: IMG_1220.jpg
Views: 329
Size: 80.0 KB

Name: IMG_1222.jpg
Views: 328
Size: 69.3 KB

Name: IMG_0715.jpg
Views: 327
Size: 49.5 KB

08-21-2016, 09:31 PM	#101
85raiderburban Registered User Join Date: Nov 2014 Location: between AZ & NV Posts: 67	Re: The first ever 73-91 Burb post your ride thread! cleaned up the new tires I bought for her, the others were dry rotted. The red LED digital gauge is for trans temp (700r4 swap). I replaced that one with a needle one now. The other is a tach. LED lighting for the cluster also. Attached Images __________________ UNDER CONSTRUCTION '80 Suburban C20 (C6P) (Silverado) - '68 472 (Edelbrock 1813, PH8026 LT's, H pipe) / '91 4L80 (manual shift,vac modulator, 350 converter) / 14B FF 3.21 G80 34' s/ '96 GMT400 interior

08-21-2016, 09:51 PM	#102
85raiderburban Registered User Join Date: Nov 2014 Location: between AZ & NV Posts: 67	Re: The first ever 73-91 Burb post your ride thread! Swapped out the Edelbrock 1406. It wasn't supplying enough air/fuel for the 454. '86 non cc Quadrajet off of an RV 7.4 is now in it's place with an adapter plate to the (Edelbrock c454) intake. The power steering filler neck is from a newer Trailblazer. Throttle/TV cable set up with $8 bracket. Factory carbed air cleaner from another parted truck with hose to the front grill for forced air induction. It fits under the hood with about half an inch clearance Attached Images __________________ UNDER CONSTRUCTION '80 Suburban C20 (C6P) (Silverado) - '68 472 (Edelbrock 1813, PH8026 LT's, H pipe) / '91 4L80 (manual shift,vac modulator, 350 converter) / 14B FF 3.21 G80 34' s/ '96 GMT400 interior

03-26-2017, 04:15 PM	#103
basher13 Registered User Join Date: Apr 2012 Location: Coalfield, Wa Posts: 20	Re: The first ever 73-91 Burb post your ride thread! New to me, had to make sure the 4wd worked! Attached Images

03-27-2017, 01:20 PM	#104
basher13 Registered User Join Date: Apr 2012 Location: Coalfield, Wa Posts: 20	Re: The first ever 73-91 Burb post your ride thread! Back in November exploring the other side of the state. Attached Images

04-09-2017, 01:50 PM	#106
basher13 Registered User Join Date: Apr 2012 Location: Coalfield, Wa Posts: 20	Re: The first ever 73-91 Burb post your ride thread! What's the WARN motto? Go Prepared! Well I didn't...putting together my recovery kit today. Good times! Attached Images

04-09-2017, 02:31 PM	#107
Country Suburban 4x4 Registered User Join Date: Apr 2014 Location: Pittsford, Vermont Posts: 38	Re: The first ever 73-91 Burb post your ride thread! My 1983 GMC K2500 Suburban. 29,000 original miles currently, 350 bored 30 over, edelbrock aluminum heads and intake, comp cam roller rockers, headers, mild cam. TH400 tranny, GM 14 bolt rear, Dana 44 front, 4.10 gears with an NP208 transfer case. When I get done with college next year, I will be pulling the engine and most likely building a 383 stroker, but I've got some time to plan. I've had this truck since I got my learner's permit at 15 years old and it has been a blast building it with my father, lots of great memories. The old burban goes by "Clifford". The day I became the 2nd owner: Here she is now: __________________ '83 GMC K2500 Suburban 4x4 2000 Chevrolet Silverado 1500 Z71 4x4 God Bless America!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.