09-25-2008, 03:52 PM | #101 |
African-American Shaolin Monk
Join Date: Aug 2006
Location: Maricopa, AZ
Posts: 200
|
Re: $999 for a Dropmember
Anybody know if there is ANY rear suspension setup that is similar to Nates' for the full size blazers ? (73-87) to lay it out ?
|
09-25-2008, 09:03 PM | #102 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: $999 for a Dropmember
Not that I am aware of. Just get Nate to build you what you need.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
09-26-2008, 01:30 AM | #103 |
African-American Shaolin Monk
Join Date: Aug 2006
Location: Maricopa, AZ
Posts: 200
|
Re: $999 for a Dropmember
thank you for the answer
|
09-26-2008, 01:39 AM | #104 |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: $999 for a Dropmember
Just sent you a PM!
The rear portion of the blazer chassis is different than the trucks. It has different spring hanger locations and a couple other minor differences. The kits for the c10 won't just bolt right up in the rear. Were you looking for bolt-in, or weld-in stuff? The front portion of the chassis and suspension is the same as the C-10 trucks.
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
09-26-2008, 02:14 AM | #105 | |
3DrDwn--the 'burb not the band
Join Date: Jan 2007
Location: missoula, mt
Posts: 598
|
Re: $999 for a Dropmember
Quote:
Josh
__________________
Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327 Last edited by RunninLo; 09-26-2008 at 02:15 AM. Reason: grammar |
|
09-26-2008, 02:56 AM | #106 |
Surviving, one day at a time!
Join Date: Jan 2008
Location: Turlock,CA
Posts: 295
|
Re: $999 for a Dropmember
There isn't one for the 73-87 Burbs either but I know when I'm ready to do mine I'll talk to Nate. His reputation for quality parts and service are worth the money.
__________________
79 Burb,350,tremic 5 spd, 4 wheel disc, daily driver 74 swb,350,350,driver & future project "There's no such thing as a finished project" |
09-26-2008, 10:10 AM | #107 |
African-American Shaolin Monk
Join Date: Aug 2006
Location: Maricopa, AZ
Posts: 200
|
Re: $999 for a Dropmember
Nate sent me a PM, and i thank him for that, also thank you to all of you for your answers also. Nate said he would work with me to come up with something. I'm so excited i'm calling all my friends now.
|
09-26-2008, 11:50 AM | #108 |
Keepin it old school
Join Date: Jul 2008
Location: Ca
Posts: 672
|
Re: $999 for a Dropmember
Nate, I would like to know how many different versions of the dropmember you have? Meaning do you have different versions for different years? If so can you list those here? Im curious what years interchange... I have a 63 with a stock 85 crossmember/suspension
Last edited by Bazooka; 09-26-2008 at 11:51 AM. |
09-26-2008, 12:34 PM | #109 | |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: $999 for a Dropmember
Quote:
The Dropmember is available for the C10 from 1960-1987 (that is as detailed as I will be). Factory control arms from 1963-1987 can be used, I also sell a bag plate for these factory arms. Other Dropmembers available: Dropmember C4 Dropmember Weld-in (for square tube frame-rails) Dropmembers Coming Soon: Dropmember C5 Dropmember C10 coil-over
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
|
09-26-2008, 12:45 PM | #110 |
Registered User
Join Date: Jul 2007
Location: san antonio
Posts: 648
|
Re: $999 for a Dropmember
i pretty dure this has been answered already the what is the round-ebout cost for the complete drop member with arms bags and everthing else? and how long does it usually take to ship? I am in no rush just some info im wondering about
|
09-26-2008, 02:40 PM | #111 | |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: $999 for a Dropmember
Quote:
Lee-time from order placed until Dropmember recieved is currently between 2 and 3 weeks.
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
|
09-27-2008, 05:47 PM | #112 |
Registered User
Join Date: May 2008
Location: Belle Bose Louisiana
Posts: 9
|
Re: $999 for a Dropmember
does the dropmember narrow the track of the front wheels and can it work with 30 inch tires? or is 29 the max?
Last edited by Shane; 09-27-2008 at 07:02 PM. Reason: removal of advertising on a post from a non-subscribing account |
09-27-2008, 08:11 PM | #113 |
Registered User
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,939
|
Re: $999 for a Dropmember
it does narrow the track width about 1.5 inches per side. I dont know about the tires tho...
Dave
__________________
Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" |
09-27-2008, 09:46 PM | #114 |
3DrDwn--the 'burb not the band
Join Date: Jan 2007
Location: missoula, mt
Posts: 598
|
Re: $999 for a Dropmember
I'm pretty sure the rear can accomodate up to a 32" wheel tire overall diameter if it is ordered to do so as there are different size notches. The front was designed to lay-out on a 29" wheel tire overall diameter with 3" spindles. My guess is you can run as large a wheel tire combo as you can stuff in the wells but your min dropped height goes up unless you talk to Nate about custom upper bag mounts.
Josh
__________________
Slo and Lo that is the tempo. '72 burb build page here: http://67-72chevytrucks.com/vboard/s...d.php?t=259256 '89 GMC Dually crew build page coming soon. 88 4x4 crew DD duallys past/present pics here: http://67-72chevytrucks.com/vboard/s...46#post4001246 89 1 ton Dually rear flip kit install here: http://67-72chevytrucks.com/vboard/s...d.php?t=354327 |
09-27-2008, 11:07 PM | #115 |
One day...
Join Date: Apr 2008
Location: Tuttle, Ok
Posts: 9,243
|
Re: $999 for a Dropmember
Very cool dragalac!!
|
09-28-2008, 02:15 PM | #116 |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: $999 for a Dropmember
As others have mentioned, the Dropmember narrows the trac-width 1.5" per side. Also, the Dropmember in its un-modified form will lay frame with a 29" diameter tire, 3" spindle, and Firestone bag. Anything taller will need a few mods to the Dropmember. I do offer custom Dropmember mods at NO additional price. I build them all per order to ensure they fit the application as desired by the customer.
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
09-28-2008, 08:36 PM | #117 | |
Señor Member
Join Date: May 2002
Location: Edge of the world
Posts: 5,367
|
Re: $999 for a Dropmember
Quote:
__________________
|
|
09-29-2008, 01:33 PM | #118 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,921
|
Re: $999 for a Dropmember
What are the advantages of this over the C4? Coil-over/Shockwave, I assume? Mono-leaf possible? Price point comparable to the other designs?
Pics? Thanks again -Chris
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
09-29-2008, 08:44 PM | #119 | |
Registered User
Join Date: Sep 2008
Location: north myrtle beach sc
Posts: 2
|
Re: $999 for a Dropmember
Quote:
|
|
09-29-2008, 09:42 PM | #120 | |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: $999 for a Dropmember
Quote:
I know some of the C4 stuff is getting harder to find, and the C5 can be purchased brand new from the dealer. Performance brakes are very plentiful, and often times more affordable. The appeal of the C5 is also a big factor. It will be suspended by either a coil-over or Shockwave, just as the C4 design. The mono-leaf sounds appealing, but its load capacity and spring rate make it a bad fit for these trucks. As for price, I plan on hanging around the $1200 like the Dropmember C4 is now priced at. This could vary a little either way, depending on how much it costs me to produce.
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
|
09-30-2008, 07:30 AM | #121 | |
Registered User
Join Date: Apr 2006
Location: Arkansas
Posts: 835
|
Re: $999 for a Dropmember
Quote:
I was actully told by the guys at Coys wheels that the C5 calipers wouldn't fit with their wheels. I'm not sure if that was backspacing specific.
__________________
Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver Last edited by babyblueoval; 09-30-2008 at 07:31 AM. |
|
09-30-2008, 08:17 AM | #122 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: $999 for a Dropmember
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 09-30-2008 at 09:49 AM. |
|
09-30-2008, 10:13 AM | #123 |
Jon@AirRideTech
Join Date: Aug 2008
Location: Jasper Indiana
Posts: 101
|
Re: $999 for a Dropmember
I know Im late but the new piece looks awesome nate.......
__________________
Selling The best Damn Air Suspension www.ridetech.com jon@ridetech.com (812) 482-2932 |
09-30-2008, 10:26 AM | #124 |
Senior Member
Join Date: Dec 2003
Location: Mesa,Az
Posts: 3,981
|
Re: $999 for a Dropmember
Thanks Jon... better late than never!
__________________
www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003! |
09-30-2008, 09:28 PM | #125 | |
Registered User
Join Date: Apr 2006
Location: Arkansas
Posts: 835
|
Re: $999 for a Dropmember
Quote:
If they work that's good to know since that's the basic upgrade for the C4 stuff.
__________________
Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver |
|
Bookmarks |
Tags |
air, bags, dropmember, porterbuilt, ride, suicide doors |
|
|