Here's those pics of the under dash pedal assembly

[jephs422]

Here's a few images:

Triple remote reservoir for dual master cylinder and single clutch. Please note that these are NOT open vented systems. FULLY sealed, we add the bellow/diaphragm to the reservoir and you get rid of the one in your master cylinder. Systems that are vented to the atmosphere will collect moisture. Cheap units can be had for less, but they are NOT worth it.



Our reservoirs are ported on the bottom as well as the back. You will plug the set you decide to not use. This allows you to run your lines through the firewall, or down it.



Our billet master cylinder lid is ready to use for a remote system, or you can drill/tap your existing lid. Just remember, when switching to a remote reservoir style system, you are overfilling your master cylinder. We highly recommend using our lid because of the tighter fit and use of the OEM gasket for a superior seal.



I don't remember if I ever posted dimensions, but here ya go

dimensionally, the dual with clutch is the same as the single.

[jmedero]

Can you use the Cpp all in one master? The chrome one with the built in prop valve?
Posted via Mobile Device

[Scottshotrods]

Yes you can but there is no need to go with the chrome one you will not be able to see it under the dash

Justin

[crossfire84]

do you have a thru the firewall brake and clutch pedal assembly ?

[Last_Paladin]

How about a remote billet cover for the Wildwood billet Master Cylinders?

I don't feel like using an Allen wrench to check my brake fluid every time.

[Scottshotrods]

Originally Posted by Last_Paladin

How about a remote billet cover for the Wildwood billet Master Cylinders?

I don't feel like using an Allen wrench to check my brake fluid every time.

You can send us your Wilwood master lid and we will drill in two holes and tap it for you.You can run some 1/8 pipe an fittings out of your lid.You have now a remotoe lid after this is done.

Price you will be looking at will be $30.00 to do this for you.Plus shipping

Justin

[Last_Paladin]

Originally Posted by Scottshotrods

You can send us your Wilwood master lid and we will drill in two holes and tap it for you.You can run some 1/8 pipe an fittings out of your lid.You have now a remotoe lid after this is done.

Price you will be looking at will be $30.00 to do this for you.Plus shipping

Justin

I can do that myself. That's not what I want, since it doesn't look professional. It has Wildwood all over it.

[Scottshotrods]

If you do not want that and want us to machine one for you.We can do this for you no problem at all.

You can call me at the shop at (805)485-0382

Justin

[Scottshotrods]

Originally Posted by crossfire84

do you have a thru the firewall brake and clutch pedal assembly ?

Yes we do you can call us at the shop at (805)485-0382

Justin

[jephs422]

Originally Posted by crossfire84

do you have a thru the firewall brake and clutch pedal assembly ?

I don't have a dimensioned image, but I'm sure I can go get a tape and get you one this week. I don't have any pics of the brake/clutch unit, but I'll see if I can't go shoot one.

[C0UCH]

Tagging for later. Will buy when I redo my brakes.
Posted via Mobile Device

[83c10wit454]

Anyone have any good solutions to using this setup and still having windshield wipers?