Project: What the heck did I get into??? - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrodhomi · 04-06-2011, 10:07 PM

bobshotrodblazer · 04-07-2011, 07:48 AM

Looking good Man...........Ready to cruise when the roads clear up?

Rochlow · 04-07-2011, 08:32 AM

Quote:

Originally Posted by bobshotrodblazer

Looking good Man...........Ready to cruise when the roads clear up?

I'm trying to get it done by then. Or at least for Goodguys Rhinebeck the last week of June..

vtblazer · 04-07-2011, 05:11 PM

Quote:

Originally Posted by Rochlow

Well, got it on the ground

Looks awesome!

VA72C10 · 04-07-2011, 05:19 PM

Sweet stance!!!

Rochlow · 05-19-2011, 08:30 AM

Little piddly things to report. Doing the rear brakes for the third time.. Didn't realize that there were two different thickness in the shoes. So I pulled the apart and fixed that.

Then, I went to bleed the brakes. One screw broke off and the other stripped.. Off to the parts store to get new wheel cylinders. Trying to get that done at some point.

Had to put a new mini starter in.

Seats are at the upholesters.. Hopefully he gets the lead out. New carpet in.

I have until the 25th of June to get this pig done, so I can take it to Goodguys in Rhinebeck, NY...

Rochlow · 06-01-2011, 08:44 PM

Well this is what I got done on the long weekend. The instructions are ok at best. And it fits really snug. The windows fit like crap..

I put the carpet in and the sill plates. The seats are at the upholesters right now. I have two issues that I'm working on. One is the thermo switch for the electric fan. I tried two different probe style and they didn't work. I now have one that goes in the manifold. See how that works.

The other is the rear brakes. Ive bleed them about 20 times and still get air out of them. So I got a new master cylinder to see how that works...

jessewebb · 06-15-2011, 03:27 PM

Nice job Jeff, I'll have to keep up with the build, can't wait to see some inside pics.. If the outside is any indication it will be awsome.

**Dieselwrencher** · 07-08-2011, 09:35 PM

Awesome build you have done! Were you able to make it to Good Guys with it? How water tight are those tops?

Rochlow · 07-08-2011, 10:15 PM

I went to good guys, but not with the truck. I still have some minor issues I have to work out. I have to adjust the hood. Install one seat belt and junk like that.

The top isn't completely water tight. There are hole just above the vent windows and you cant close the doors with the window completely up. You have to roll it up under these flaps when to door is shut.

Rochlow · 10-02-2011, 05:26 PM

Interior kinda done..

completed before I tore the front suspension apart for a few new parts..

VA72C10 · 10-02-2011, 09:59 PM

Love the interior!!!

hotrodhomi · 10-02-2011, 10:43 PM

It looks great!

**k5blazin** · 10-02-2011, 10:51 PM

Looking good!! Nice work!
Posted via Mobile Device

Rochlow · 11-22-2011, 08:27 PM

Papa got some Porterbuilt!!!

502ms · 12-03-2011, 08:17 AM

Looks amazin! Subscribed!
Posted via Mobile Device

502ms · 12-03-2011, 08:18 AM

Quote:

Originally Posted by Rochlow

Papa got some Porterbuilt!!!

Wow! Front and rear?
Posted via Mobile Device

Rochlow · 12-03-2011, 08:53 AM

Quote:

Originally Posted by 502ms

Wow! Front and rear?
Posted via Mobile Device

Thanks. I just got the front and it has Porterbuilt trailing arms on it now, but the axle is bottoming out in the C-notch.

PHAT TONY · 12-03-2011, 10:47 PM

...did it go lower yet in the bum?

**lolife99** · 12-04-2011, 06:49 AM

Quote:

Originally Posted by Rochlow

Papa got some Porterbuilt!!!

So you aren't selling the tub now?

Rochlow · 12-04-2011, 01:15 PM

Yea it's still for sale. Kinda waiting to see if it sells. If it does then I will be on the look out forma 67-68 truck. If not I will put the DM in it and finish it. Just feel guilty about cutting a tub this nice for the notches..
Posted via Mobile Device

**jaros44sr** · 12-04-2011, 07:01 PM

You oughta sell it to the new guy in wilmington, delaware. He has a really ruff body on his...just sayin

Rochlow · 12-04-2011, 08:24 PM

I know he's one of the guys looking at it. The other is a local guy.
Posted via Mobile Device

**jaros44sr** · 12-04-2011, 08:37 PM

Quote:

Originally Posted by Rochlow

I know he's one of the guys looking at it. The other is a local guy.
Posted via Mobile Device

Its not VTBlazer, is it?

I got a '67 hood here for ya, finally

Rochlow · 12-04-2011, 08:41 PM

No.. The body did come from him though. I'll have to get back to you on the hood.
Posted via Mobile Device

04-06-2011, 10:07 PM	#101
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Project: What the heck did I get into??? __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

04-07-2011, 07:48 AM	#102
bobshotrodblazer BigBlockBobby Join Date: Mar 2004 Location: Lake Worth, Florida Posts: 740	Re: Project: What the heck did I get into??? Looking good Man...........Ready to cruise when the roads clear up? __________________ Bob

04-07-2011, 05:19 PM	#105
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project: What the heck did I get into??? Sweet stance!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-19-2011, 08:30 AM	#106
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project: What the heck did I get into??? Little piddly things to report. Doing the rear brakes for the third time.. Didn't realize that there were two different thickness in the shoes. So I pulled the apart and fixed that. Then, I went to bleed the brakes. One screw broke off and the other stripped.. Off to the parts store to get new wheel cylinders. Trying to get that done at some point. Had to put a new mini starter in. Seats are at the upholesters.. Hopefully he gets the lead out. New carpet in. I have until the 25th of June to get this pig done, so I can take it to Goodguys in Rhinebeck, NY...

06-01-2011, 08:44 PM	#107
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project: What the heck did I get into??? Well this is what I got done on the long weekend. The instructions are ok at best. And it fits really snug. The windows fit like crap.. I put the carpet in and the sill plates. The seats are at the upholesters right now. I have two issues that I'm working on. One is the thermo switch for the electric fan. I tried two different probe style and they didn't work. I now have one that goes in the manifold. See how that works. The other is the rear brakes. Ive bleed them about 20 times and still get air out of them. So I got a new master cylinder to see how that works...

06-15-2011, 03:27 PM	#108
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: Project: What the heck did I get into??? Nice job Jeff, I'll have to keep up with the build, can't wait to see some inside pics.. If the outside is any indication it will be awsome. __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

07-08-2011, 09:35 PM	#109
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Project: What the heck did I get into??? Awesome build you have done! Were you able to make it to Good Guys with it? How water tight are those tops? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

07-08-2011, 10:15 PM	#110
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project: What the heck did I get into??? I went to good guys, but not with the truck. I still have some minor issues I have to work out. I have to adjust the hood. Install one seat belt and junk like that. The top isn't completely water tight. There are hole just above the vent windows and you cant close the doors with the window completely up. You have to roll it up under these flaps when to door is shut.

10-02-2011, 05:26 PM	#111
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project: What the heck did I get into??? Interior kinda done.. completed before I tore the front suspension apart for a few new parts..

10-02-2011, 09:59 PM	#112
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project: What the heck did I get into??? Love the interior!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-02-2011, 10:43 PM	#113
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Project: What the heck did I get into??? It looks great! __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

10-02-2011, 10:51 PM	#114
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 401	Re: Project: What the heck did I get into??? Looking good!! Nice work! Posted via Mobile Device

11-22-2011, 08:27 PM	#115
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project: What the heck did I get into??? Papa got some Porterbuilt!!!

12-03-2011, 08:17 AM	#116
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Project: What the heck did I get into??? Looks amazin! Subscribed! Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

12-03-2011, 10:47 PM	#119
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: Project: What the heck did I get into??? ...did it go lower yet in the bum? __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664



Register or Log In To remove these advertisements.

12-04-2011, 01:15 PM	#121
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project: What the heck did I get into??? Yea it's still for sale. Kinda waiting to see if it sells. If it does then I will be on the look out forma 67-68 truck. If not I will put the DM in it and finish it. Just feel guilty about cutting a tub this nice for the notches.. Posted via Mobile Device

12-04-2011, 07:01 PM	#122
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Project: What the heck did I get into??? You oughta sell it to the new guy in wilmington, delaware. He has a really ruff body on his...just sayin __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-04-2011, 08:24 PM	#123
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project: What the heck did I get into??? I know he's one of the guys looking at it. The other is a local guy. Posted via Mobile Device

12-04-2011, 08:41 PM	#125
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Project: What the heck did I get into??? No.. The body did come from him though. I'll have to get back to you on the hood. Posted via Mobile Device

Register or Log In To remove these advertisements.