baclay9's 83' SWB Build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JohnC · 12-06-2010, 10:12 AM

Sorry to hear about the bumps in the road. Just keep plugging away at it man. It will be a beast when it's done!

cable666guy · 12-06-2010, 11:54 AM

Yeah man, don't give up now, it's gonna be sweet when it's done. then you'll look back and laugh at the "hiccups" that happened along the way...BTW, dad's truck looks sharp too...

*87 chevy silverado* · 01-02-2011, 07:18 PM

hows it coming along?

baclay9 · 01-02-2011, 09:37 PM

It is going good. I got the 781 heads back from the machine shop and they look great. Block and rotating assembly will be headed to the machine shop next time I am home from work in about 20-25 days. Block is getting the main caps line honed. Cylinders are great, they are just getting cleaned up.

Here is a rundown of what it will be. I will probably forget something but here goes...

Steel Crank
Scat I-beam rods (floaters)
Speed Pro Pistons (9.5:1)
Comp Cams xe274h (274/286, 230/236 @ .050)(552/555 lift)
New valve springs that match the cam
Harland sharp full roller rockers
Comp magnum push rods
Edelbrock RPM Air Gap manifold
750cfm Holley w/ vacuum secondaries
Edelbrock water pump
Pertronics flame thrower billet distributor(multi spark)
Posted via Mobile Device

**scotts62** · 01-02-2011, 10:28 PM

JohnC · 01-03-2011, 10:40 AM

Quote:

Originally Posted by scotts62

: agree!

*87 chevy silverado* · 01-03-2011, 12:11 PM

baclay9 · 02-28-2011, 11:05 PM

Got my motor mostly put back together yesterday. I taped everything up and painted it today.I love the way it is looking. I need to order my valve covers and air cleaner and I will have everything. My oil pan is still at the powdercoater so I just have a few odds and ins to finish up this week.

By claypool782 at 2011-02-28

By claypool782 at 2011-02-28

I will post some more pics when I get a little further along with it.

joe231 · 02-28-2011, 11:55 PM

Saweet!!
Posted via Mobile Device

**scotts62** · 02-28-2011, 11:56 PM

Looking good man!

JohnC · 03-01-2011, 09:12 AM

Looks good!

73gmc454 · 03-01-2011, 01:45 PM

Nice truck, will run great with that big block , what size intake valves do the heads have ?

baclay9 · 03-01-2011, 02:22 PM

They are stock right now. I kindof wish I would have went ahead and opened them up with the bigger valves. But, I figure they will make plenty of power the way they are. If I'm not happy with them when I get it driving I will rip them back off and have them opened up.
Posted via Mobile Device

baclay9 · 03-01-2011, 07:55 PM

Here are a couple more from today. Got the lifters, pushrods , and rockers installed. The Intake and carb are just sitting on it so I could see how it would look.

By claypool782 at 2011-03-01

joe231 · 03-01-2011, 10:00 PM

looks sweet!
what color is that on the block and heads?

baclay9 · 03-01-2011, 10:11 PM

It is Duplicolor Cast Iron. I kindof wanted it to look like nothing was done to it once it is in the engine bay.

I was kindof considering painting that shiny new intake the same color. To maybe kindof give it that "stock" look. What do you guys think? I love the way it looks now but I know they always end up stained and stuff.
Posted via Mobile Device

joe231 · 03-01-2011, 10:57 PM

I like the color!
It would look good on the intake, what are you planning for the breather and valve covers?
Posted via Mobile Device

baclay9 · 03-01-2011, 11:09 PM

I got the "wrinkle black" ones from Proform. They say chevrolet in red. They are on the way. They don't make a timing chain cover for BBC so I had a stock one powdercoated wrinkle black. I know you can't tell in the pic but it has a rough texture to it. They are also doing my oil pan the same right now.
Posted via Mobile Device

joe231 · 03-01-2011, 11:19 PM

Cool
I vote to paint the intake
Posted via Mobile Device

dropd80s · 03-01-2011, 11:23 PM

I have painted a few motors that same color, if the engine bay is a lighter color (ie not black) it will really stand out but still give you that stockish look. If the bay is black the cast iron color gets lost and just ends up looking like another motor. Just something to think about. Happy to see the frame being put to good use. Looking really good.

baclay9 · 03-01-2011, 11:43 PM

The bay will most likely end up being dark blue. I am kindof going for a "stock look" with this truck so I almost want it to look very average on first glance. I thought this color would accomplish that.

I was planning on having my serpentine brackets powdercoated a cast aluminum color and then have the pulleys done in satin black. I was kindof thinking that having the brackets the same color as the intake would pull it together.

The more I think about it the more I think the intake would look good the same color as the block. I am just afraid that gas or oil might eat at the paint on the intake and really make it look crappy.

The frame is definitely getting put to good use man. I am holding to have it back on the road by fall.
Posted via Mobile Device

**scotts62** · 03-02-2011, 12:05 AM

Ya true but if it gets on the aluminum it will do the same so its like a bad case of catch 22

JohnC · 03-02-2011, 10:05 AM

I kind of like the contrast that the alum intake gives. Then if you add some more alum colored brackets and stuff I think it will look sweet. By the time you get all the lines, hoses, accessories, and air cleaner on there it won't stand out near as much as it does there in that pic.

77BBGMC · 03-02-2011, 10:55 PM

Nice work and your dads pickup looks sharp! Your motor build is similar to mine except I ended up going with a stroker crank. I'll be interested to see how you like the Spintech's. I've listened to them on youtube and they sound good.

baclay9 · 03-06-2011, 10:18 PM

Got a few more goodies in. I am headed back out to work for 20+ days so hopefully I will get some more done next time I am home. Intake, oil pan, pulleys, and serpentine brackets are all at the powdercoater so I should have all that back when I come home. Anyway, until next time...

By claypool782 at 2011-03-06

12-06-2010, 10:12 AM	#101
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: baclay9's 83' SWB Build Sorry to hear about the bumps in the road. Just keep plugging away at it man. It will be a beast when it's done!

12-06-2010, 11:54 AM	#102
cable666guy Registered User Join Date: Sep 2008 Location: Willow Grove, PA Posts: 299	Re: baclay9's 83' SWB Build Yeah man, don't give up now, it's gonna be sweet when it's done. then you'll look back and laugh at the "hiccups" that happened along the way...BTW, dad's truck looks sharp too...

01-02-2011, 07:18 PM	#103
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: baclay9's 83' SWB Build hows it coming along?

01-02-2011, 09:37 PM	#104
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build It is going good. I got the 781 heads back from the machine shop and they look great. Block and rotating assembly will be headed to the machine shop next time I am home from work in about 20-25 days. Block is getting the main caps line honed. Cylinders are great, they are just getting cleaned up. Here is a rundown of what it will be. I will probably forget something but here goes... Steel Crank Scat I-beam rods (floaters) Speed Pro Pistons (9.5:1) Comp Cams xe274h (274/286, 230/236 @ .050)(552/555 lift) New valve springs that match the cam Harland sharp full roller rockers Comp magnum push rods Edelbrock RPM Air Gap manifold 750cfm Holley w/ vacuum secondaries Edelbrock water pump Pertronics flame thrower billet distributor(multi spark) Posted via Mobile Device

01-02-2011, 10:28 PM	#105
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build __________________ Scott 93 crew cab build Project 62

01-03-2011, 12:11 PM	#107
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: baclay9's 83' SWB Build

02-28-2011, 11:05 PM	#108
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Got my motor mostly put back together yesterday. I taped everything up and painted it today.I love the way it is looking. I need to order my valve covers and air cleaner and I will have everything. My oil pan is still at the powdercoater so I just have a few odds and ins to finish up this week. By claypool782 at 2011-02-28 By claypool782 at 2011-02-28 By claypool782 at 2011-02-28 By claypool782 at 2011-02-28 I will post some more pics when I get a little further along with it.

02-28-2011, 11:55 PM	#109
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build Saweet!! Posted via Mobile Device __________________ *CHEVY ONLY*

02-28-2011, 11:56 PM	#110
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build Looking good man! __________________ Scott 93 crew cab build Project 62

03-01-2011, 09:12 AM	#111
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: baclay9's 83' SWB Build Looks good!

03-01-2011, 01:45 PM	#112
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: baclay9's 83' SWB Build Nice truck, will run great with that big block , what size intake valves do the heads have ? __________________ my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237

03-01-2011, 02:22 PM	#113
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build They are stock right now. I kindof wish I would have went ahead and opened them up with the bigger valves. But, I figure they will make plenty of power the way they are. If I'm not happy with them when I get it driving I will rip them back off and have them opened up. Posted via Mobile Device

03-01-2011, 07:55 PM	#114
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Here are a couple more from today. Got the lifters, pushrods , and rockers installed. The Intake and carb are just sitting on it so I could see how it would look. By claypool782 at 2011-03-01 By claypool782 at 2011-03-01

03-01-2011, 10:00 PM	#115
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build looks sweet! what color is that on the block and heads? __________________ *CHEVY ONLY* Last edited by joe231; 03-01-2011 at 10:01 PM.

03-01-2011, 10:11 PM	#116
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build It is Duplicolor Cast Iron. I kindof wanted it to look like nothing was done to it once it is in the engine bay. I was kindof considering painting that shiny new intake the same color. To maybe kindof give it that "stock" look. What do you guys think? I love the way it looks now but I know they always end up stained and stuff. Posted via Mobile Device Last edited by baclay9; 03-01-2011 at 10:26 PM.



Register or Log In To remove these advertisements.

03-01-2011, 10:57 PM	#117
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build I like the color! It would look good on the intake, what are you planning for the breather and valve covers? Posted via Mobile Device __________________ *CHEVY ONLY*

03-01-2011, 11:09 PM	#118
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build I got the "wrinkle black" ones from Proform. They say chevrolet in red. They are on the way. They don't make a timing chain cover for BBC so I had a stock one powdercoated wrinkle black. I know you can't tell in the pic but it has a rough texture to it. They are also doing my oil pan the same right now. Posted via Mobile Device

03-01-2011, 11:19 PM	#119
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: baclay9's 83' SWB Build Cool I vote to paint the intake Posted via Mobile Device __________________ *CHEVY ONLY*

03-01-2011, 11:23 PM	#120
dropd80s Registered User Join Date: Mar 2003 Location: wichita falls tx Posts: 429	Re: baclay9's 83' SWB Build I have painted a few motors that same color, if the engine bay is a lighter color (ie not black) it will really stand out but still give you that stockish look. If the bay is black the cast iron color gets lost and just ends up looking like another motor. Just something to think about. Happy to see the frame being put to good use. Looking really good.

03-01-2011, 11:43 PM	#121
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build The bay will most likely end up being dark blue. I am kindof going for a "stock look" with this truck so I almost want it to look very average on first glance. I thought this color would accomplish that. I was planning on having my serpentine brackets powdercoated a cast aluminum color and then have the pulleys done in satin black. I was kindof thinking that having the brackets the same color as the intake would pull it together. The more I think about it the more I think the intake would look good the same color as the block. I am just afraid that gas or oil might eat at the paint on the intake and really make it look crappy. The frame is definitely getting put to good use man. I am holding to have it back on the road by fall. Posted via Mobile Device

03-02-2011, 12:05 AM	#122
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: baclay9's 83' SWB Build Ya true but if it gets on the aluminum it will do the same so its like a bad case of catch 22 __________________ Scott 93 crew cab build Project 62

03-02-2011, 10:05 AM	#123
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: baclay9's 83' SWB Build I kind of like the contrast that the alum intake gives. Then if you add some more alum colored brackets and stuff I think it will look sweet. By the time you get all the lines, hoses, accessories, and air cleaner on there it won't stand out near as much as it does there in that pic.

03-02-2011, 10:55 PM	#124
77BBGMC Registered User Join Date: May 2009 Location: Kansas Posts: 357	Re: baclay9's 83' SWB Build Nice work and your dads pickup looks sharp! Your motor build is similar to mine except I ended up going with a stroker crank. I'll be interested to see how you like the Spintech's. I've listened to them on youtube and they sound good.

03-06-2011, 10:18 PM	#125
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: baclay9's 83' SWB Build Got a few more goodies in. I am headed back out to work for 20+ days so hopefully I will get some more done next time I am home. Intake, oil pan, pulleys, and serpentine brackets are all at the powdercoater so I should have all that back when I come home. Anyway, until next time... By claypool782 at 2011-03-06

Register or Log In To remove these advertisements.