OR 1972 C10 Parting

[DLTruck1973]

Originally Posted by doodah man

I'm interested in the passenger-side parking lamp housing if it's complete and in good condition. Let me know price + shipping to 19104. Thanks.

It will not be the one in the thread but I do have a nice usable passenger side park light housing for $12.50 plus $12.00 to ship so $24.50 total. No lens or lens screws but is otherwise complete. If you need the lens and crews, add another $17.00 for a nice driver quality lens with screws or $15.00 without screws.

Let me know if interested,
Thank you,
Thomas

[doodah man]

Thanks Thomas. Does it include the gasket? Either way, I'll take it. How will you ship? You can PM with answers and paypal info.

Craig.

[DLTruck1973]

Originally Posted by doodah man

Thanks Thomas. Does it include the gasket? Either way, I'll take it. How will you ship? You can PM with answers and paypal info.

Craig.

PM on the way.

Thank you,
Thomas

[Chevy Fan Always]

Originally Posted by Chevy Fan Always

Sounds good, send me your Paypal.

Mike

Do you have the spark plug heat shield that goes around the temp sending unit?
Mike

[Stu Pidd]

Where is Junction City?

I'm in the Portland area often, and need a fan shroud for the '71.

edit: I see you're near Eugene. Kinda far for a drive. Are you close the Eugene airport?

[DLTruck1973]

Originally Posted by Stu Pidd

Where is Junction City?

I'm in the Portland area often, and need a fan shroud for the '71.

edit: I see you're near Eugene. Kinda far for a drive. Are you close the Eugene airport?

Yes we are about two miles north of the Eugine airport on Hwy 99. It is about a 2 hr drive from Portland.

Get me your zip code and I can get you a ship quote if interested.

Thank you for the interest,
Thomas

[Dewey72]

Looking for a drivers side 72 pickup door. Got one?

[DLTruck1973]

Originally Posted by Dewey72

Looking for a drivers side 72 pickup door. Got one?

I may have one but have to check. What are you looking for condition wise? Are you worried about speaker hole?

I will post a photo and price if I can help you.

Thank you,
Thomas

[Dewey72]

A speaker hole is ok, I can repair that.

[DLTruck1973]

Originally Posted by Dewey72

A speaker hole is ok, I can repair that.

Here is the one I have. It does have a speaker hole and in dented on the inside lower edge near the speaker hole. Overall a very solid door. It has only had one set of mirrors on it so not filled with mirror holes.

The sharpie circles are very minor dings, hard to see in the photo. The lower corners are solid as well.

I need $175.00 for this door if you pick it up.

Let me know if you want/need any additional photos.

Thank you,
Thomas

[Dewey72]

Ok I will let ya know. That was off a 72 right. Cant see the screw hole were the wing window comes in.

[DLTruck1973]

Originally Posted by Dewey72

Ok I will let ya know. That was off a 72 right. Cant see the screw hole were the wing window comes in.

Yes sir, it is a 72 only drivers door. Let me know.

Thank you,
Thomas

[19702wdc10]

Originally Posted by DLTruck1973

To my knowledge the trans dipstick and tube for a TH350 should be the same for a 250 I6 and 350 V8 engine. The ones I have measured here are around 24 inches long.

The price on door handles do not include shipping but I can ship them to you for $7.00 so that would be $72.00 total for the handles.

Let me know and thank you,
Thomas

I measured the old dipstick tube and it is 34", 33" above the transmission and 1" into the transmission. I have the shorter one in it right now but was hoping to find longer one. Could it be from a later model truck?

Thanks
Joe

[DLTruck1973]

Originally Posted by 19702wdc10

I measured the old dipstick tube and it is 34", 33" above the transmission and 1" into the transmission. I have the shorter one in it right now but was hoping to find longer one. Could it be from a later model truck?

Thanks
Joe

It is kind of hard without an application. You may be able to use one from a 73 up 4x4 but not sure. Do you have a photo you can post of the old one?

I maybe able to ID it from a photo and help you get what you need.

Let me know,
Thank you,
Thomas

[72c10_longstep]

I'm interested in the Custom 10 badges if you can ship to Edmonton Alberta, postal code T5X 6E2.

[Chevy Fan Always]

Thomas, could I get a quote on the control arms and crossmember that they mount on to 44805 if you still have them?

Mike Wilson

Sway bar and Manifolds were great pieces. I left you a PM

[Tilldogg]

Do you have the body still? Im looking for the A Pillar post passenger side, if it can be cut of cab level to include some of the roof,
Thanks
Posted via Mobile Device

[Tilldogg]

Originally Posted by Tilldogg

Do you have the body still? Im looking for the A Pillar post passenger side, if it can be cut of cab level to include some of the roof,
Thanks
Posted via Mobile Device

Here is a picture of the bit i need,

[DLTruck1973]

Originally Posted by Tilldogg

Here is a picture of the bit i need,

I do have that for you. It will not be from the cab from this truck but from another one that is in better condition. $45.00 for that cab cut plus shipping. If interested, I can get you a shipping quote to your zip code.

Thank you,
Thomas

[Tilldogg]

Hi there
my zip code is 09459 and that price is fine with me, could u sene me a pic please, you can see mine if you could make it a lil bigger we can cut and fit to suit,
thank you

[StoningtonQB]

I would like the spare tire retainer set if still available please. Please PM

[DLTruck1973]

Originally Posted by StoningtonQB

I would like the spare tire retainer set if still available please. Please PM

PM on the way.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by Tilldogg

Hi there
my zip code is 09459 and that price is fine with me, could u sene me a pic please, you can see mine if you could make it a lil bigger we can cut and fit to suit,
thank you

Here are some photos for you of the cab I can cut from. Are you on base there? Shipping is very expensive to ship on base. If you had a residential address, that would save you some money. It is $110.00 to ship this piece on base, plus the $45.00 for the piece.

Let me know and have a good weekend,
Thomas

[Krex]

I take the mirror shipped to 75023 pm me. Thanks

[justinl6050]

Still have the transmission hump?