Pace performance fitech fuel injection - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steveo3318 · 12-30-2015, 07:15 PM

Same thing they told me. Forgot to post it. Looks like we have to wait

LostMy65 · 12-30-2015, 07:31 PM

Yeah, mine from Summit is backordered too.

tdangle · 12-31-2015, 03:04 PM

Just realized Fitech is in my backyard. Wonder if I can do a will-call pickup?

swampbog · 12-31-2015, 05:31 PM

Quote:

Originally Posted by tdangle

Just realized Fitech is in my backyard. Wonder if I can do a will-call pickup?

If you can pickup, see if they will give you a tour and report back to us on how the place looks.

steveo3318 · 01-06-2016, 03:09 PM

Just an update guys. Fitech shipped out there order to jegs yesterday. Which means jegs SHOULD be shipping out within the next few days. But just so y'all know fitech does have these units in stock as of today!!!!

Crushkrew · 01-08-2016, 02:07 PM

My 600 PA and FCC shipped yesterday from jegs...��

LostMy65 · 01-08-2016, 02:09 PM

Summit moved my estimated ship date back to February 1st.

steveo3318 · 01-08-2016, 02:09 PM

My command center did but not anything else =(. Maybe my basic 600 and return springs will soon

Crushkrew · 01-12-2016, 06:01 PM

My 600 adder came today...install and pics/vids Saturday. ....

steveo3318 · 01-12-2016, 08:28 PM

Quote:

Originally Posted by Crushkrew

My 600 adder came today...install and pics/vids Saturday. ....

Cool keep us posted.

TA1968 · 01-14-2016, 08:50 AM

This is to Big Kev-O what vented fuel cap did you go with? I'm not sure you mentioned it or I might have read over it.

Ekliptix · 01-14-2016, 03:42 PM

Well, the Canadian dollar tanking means I'm going to postpone this US purchase. $1,600USD is $2,300Canadian now. Our dollars were 1:1 in 2011.

steveo3318 · 01-14-2016, 05:04 PM

My throttle body will be in tomorrow. I hope to have it together this weekend.

LostMy65 · 01-14-2016, 05:11 PM

Quote:

Originally Posted by steveo3318

My throttle body will be in tomorrow. I hope to have it together this weekend.

Cool

Lattimer · 01-14-2016, 07:45 PM

Quote:

Originally Posted by steveo3318

My throttle body will be in tomorrow. I hope to have it together this weekend.

Don't forget to take lots of pics!!!

steveo3318 · 01-14-2016, 11:16 PM

Quote:

Originally Posted by Lattimer

Don't forget to take lots of pics!!!

I installed the command center with lots of pics and had to build a bracket. Only took two hrs with building the bracket. But it's took me 3 hrs with these damn push locks and Russell line. Man are they tough. I had to boil the hose ends for 10 minutes each and still put out like donkey kong to get them on. I don't wish a push lock on anyone. I will do a install thread this weekend when I get time. I really like the product so far. Throttle body may be here tomorrow

steveo3318 · 01-14-2016, 11:23 PM

Here's a sample of where she sits.

Lattimer · 01-15-2016, 12:33 AM

Quote:

Originally Posted by steveo3318

Here's a sample of where she sits.

That fits nice

Lattimer · 01-15-2016, 12:34 AM

Quote:

Originally Posted by steveo3318

I installed the command center with lots of pics and had to build a bracket. Only took two hrs with building the bracket. But it's took me 3 hrs with these damn push locks and Russell line. Man are they tough. I had to boil the hose ends for 10 minutes each and still put out like donkey kong to get them on. I don't wish a push lock on anyone. I will do a install thread this weekend when I get time. I really like the product so far. Throttle body may be here tomorrow

Wow. I did my whole fuel system with Earl's push locks and line, and they went together scary easy. But they do not come apart easy.

steveo3318 · 01-15-2016, 01:26 AM

Quote:

Originally Posted by Lattimer

Wow. I did my whole fuel system with Earl's push locks and line, and they went together scary easy. But they do not come apart easy.

I am hear to tell you. I greased. Wd40. Had in a vise I am 6,2 220 damn near standing on them and could only get them to the first rib. Had my neighbor a 56 year old dot machinery mechanic come over and tried and said something was wrong they was to hard to put together. Even after boiling I literally still had to put every ounce of weight into them and bounce on them. My arms and hands are sore!!!

Lattimer · 01-15-2016, 08:43 AM

Quote:

Originally Posted by steveo3318

I am hear to tell you. I greased. Wd40. Had in a vise I am 6,2 220 damn near standing on them and could only get them to the first rib. Had my neighbor a 56 year old dot machinery mechanic come over and tried and said something was wrong they was to hard to put together. Even after boiling I literally still had to put every ounce of weight into them and bounce on them. My arms and hands are sore!!!

That doesn't seem right. Mine had a little bottle of oil, and you put a drop in the end of the line and just pushed the fitting. Took a little force, but it felt like you would be able to pull it back out and no way it would seal. I tried to pull one apart with everything I've got and couldn't move it. And I'm a 6'3", 395 lb professional armwrestler.

steveo3318 · 01-15-2016, 08:48 AM

Quote:

Originally Posted by Lattimer

That doesn't seem right. Mine had a little bottle of oil, and you put a drop in the end of the line and just pushed the fitting. Took a little force, but it felt like you would be able to pull it back out and no way it would seal. I tried to pull one apart with everything I've got and couldn't move it. And I'm a 6'3", 395 lb professional armwrestler.

Dayum dude lol. When is your kit coming in? I can't wait until you get you some of these tiny fittings lol. Given you may just push them in with ease but me and my neighbor was both bowed up on mine together with no success. He even said it was to hard just to buy new line. But I figured I would try the boil method and it did soften the hose enough. I hope yours are easier than mine.

Lattimer · 01-15-2016, 08:50 AM

Quote:

Originally Posted by steveo3318

Dayum dude lol. When is your kit coming in? I can't wait until you get you some of these tiny fittings lol. Given you may just push them in with ease but me and my neighbor was both bowed up on mine together with no success. He even said it was to hard just to buy new line. But I figured I would try the boil method and it did soften the hose enough. I hope yours are easier than mine.

I haven't ordered anything yet. Waiting for your results...LOL

steveo3318 · 01-15-2016, 08:50 AM

Oh there is no way in hell these will ever pull out. I can guarantee you would break the hose before they came off the fitting.

steveo3318 · 01-15-2016, 08:52 AM

Quote:

Originally Posted by Lattimer

I haven't ordered anything yet. Waiting for your results...LOL

Haha. I will start a new thread with the build and results. I will post the link here. May be sat. I hope to install body tonight

12-30-2015, 07:15 PM	#101
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: Pace performance fitech fuel injection Same thing they told me. Forgot to post it. Looks like we have to wait __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

12-30-2015, 07:31 PM	#102
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Pace performance fitech fuel injection Yeah, mine from Summit is backordered too. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

12-31-2015, 03:04 PM	#103
tdangle Registered User Join Date: Mar 2005 Location: Jurupa Valley, Ca Posts: 1,211	Re: Pace performance fitech fuel injection Just realized Fitech is in my backyard. Wonder if I can do a will-call pickup? __________________ Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC

01-06-2016, 03:09 PM	#105
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: Pace performance fitech fuel injection Just an update guys. Fitech shipped out there order to jegs yesterday. Which means jegs SHOULD be shipping out within the next few days. But just so y'all know fitech does have these units in stock as of today!!!! __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

01-08-2016, 02:07 PM	#106
Crushkrew Registered User Join Date: Apr 2011 Location: Ft Liquordale, FL Posts: 138	Re: Pace performance fitech fuel injection My 600 PA and FCC shipped yesterday from jegs...�� __________________ 71 C10: Crush10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=650510

01-08-2016, 02:09 PM	#107
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: Pace performance fitech fuel injection Summit moved my estimated ship date back to February 1st. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

01-08-2016, 02:09 PM	#108
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: Pace performance fitech fuel injection My command center did but not anything else =(. Maybe my basic 600 and return springs will soon __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

01-12-2016, 06:01 PM	#109
Crushkrew Registered User Join Date: Apr 2011 Location: Ft Liquordale, FL Posts: 138	Re: Pace performance fitech fuel injection My 600 adder came today...install and pics/vids Saturday. .... Attached Images __________________ 71 C10: Crush10 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=650510

01-14-2016, 08:50 AM	#111
TA1968 Registered User Join Date: Dec 2015 Location: Pennsylvania Posts: 50	Re: Pace performance fitech fuel injection This is to Big Kev-O what vented fuel cap did you go with? I'm not sure you mentioned it or I might have read over it.

01-14-2016, 03:42 PM	#112
Ekliptix Registered User Join Date: Aug 2013 Location: Calgary, Alberta Posts: 683	Re: Pace performance fitech fuel injection Well, the Canadian dollar tanking means I'm going to postpone this US purchase. $1,600USD is $2,300Canadian now. Our dollars were 1:1 in 2011.

01-14-2016, 05:04 PM	#113
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: Pace performance fitech fuel injection My throttle body will be in tomorrow. I hope to have it together this weekend. __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

01-14-2016, 11:23 PM	#117
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: Pace performance fitech fuel injection Here's a sample of where she sits. __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

01-15-2016, 08:50 AM	#124
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: Pace performance fitech fuel injection Oh there is no way in hell these will ever pull out. I can guarantee you would break the hose before they came off the fitting. __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.