Daverods project 66

[ruffrida2005]

Yall just need to build those daugthers a cage on the outside.

[bubba327]

Originally Posted by ruffrida2005

Yall just need to build those daugthers a cage on the outside.

You know we have a 33 Plymouth stashed in the barn at the ranch that is a super six short track car. And it has a full roll cage and nerf bars .
Might have to change out the Hoosiers for studded snow tires. Lack of windows and heater might be a comfort issue

[daverod]

Originally Posted by bubba327

You know we have a 33 Plymouth stashed in the barn at the ranch that is a super six short track car. And it has a full roll cage and nerf bars .
Might have to change out the Hoosiers for studded snow tires. Lack of windows and heater might be a comfort issue

Nothing some goggles and a good coat could'nt fix.

[chevy_man5]

Originally Posted by ruffrida2005

Yall just need to build those daugthers a cage on the outside.

And maybe my wife too. She did this to our 05 Impala last fall. The airbags didn't pop out on this either, which totally surprised me. She was fine, just a bump on the head, but the car ended up totaled. Sorry for the poor picture quality, they were taken into the sun, with my hand stuck through the towing companies fence.

[watahyahknow]

seen someone adapt kartslicks for iceracing by cutting a few grooves in them with an electric tirecarver letting the air out lay cut to size moped chains intoo the grooves and inflate the tire again , it did great in cornering , not so mush on accelleration and braking though
later i found this....... http://www.rctankcombat.com/articles/track-systems/ .... go down the page to chain and bolt track it looks like a ladder snow chain it should work realy whell in loose snow and mud when its tightly around a slick tire

[daverod]

See there you go Bubba. A 33 Plymouth with tank tracks, roll bar, nerf bars some goggles and a good coat. Teen proof. Maybe some mitts.

[daverod]

I need to get my truck back together I miss it. I cut about an inch off my front horns to move my bumper back. Then I needed to cut some off the side braces. Got one piece of trim on. Noticed some lumps in the rear of the bed side so I sanded and hammered and mudded and sanded and mudded. I think I need to go sand. Then I need to go find some stuff for ebay so I can buy my accurair valve thing. I hear rear swing arms are selling fast.

[bubba327]

Dave You should be really good at sanding by now.
Got the Yota back -I got lucky - it was just torn up a little
Bent control arm and bent ball joint. Just $661 including two new tires.
I still have a parts fund left so what you gonna put on E-bay???? anything I need??
I have a bunch of misc stuff on E-bay now. I'm trying to clear out the garage and find some space to get the truck in. Sold the weber 32/36 carb and one clifford intake.

[daverod]

I kinda suck at it. I swear all I do is buy filler and make dust out of it. What do you need I might have it. Don't need a dead mule do you. Most the stuff is snow machine stuff. Parted out a old sled that I got for 50. Bet I got 500 out of it in parts. 180 just for the exhaust. Took boiler out of a house and put a central air. The boiler was 2 years old. Truck got some good parts from that. Mules don't burn worth $hit.

[daverod]

Ordered my Accuair valve and speed switch. Thanks Scotts. His price won't be beat. What's taking it so long. Got my new trim piece from classic's. That was fast. Kept the bent one.

[ruffrida2005]

what all kind of stuff do you need to buy from me Dave to get this bad boy done?

[daverod]

Do you have any body filler and some skin for my fingers? Wiring harness? Headers? Front drop member? rusty roof? I think I have everything to make it go up and down. Now I need to think about going forward and backward and side to side.

[ruffrida2005]

I got the painless harness out of my truck. I wont be using it. I paid over 600 for it, but if you offer me a good price I'll give it to you. It's the one built for our truck.

I sold my hearders already.

I have DV8customs front crossmember that he sectioned and moved the arms in. I traded him some stuff for it.

[daverod]

These might help Bubba.

[daverod]

[ruffrida2005]

Man that motor in the first pic looks like it has a little rust on it. Let me know if you need anything man.

[daverod]

Originally Posted by ruffrida2005

Man that motor in the first pic looks like it has a little rust on it. Let me know if you need anything man.

I need your harness. PM my with your bottom $$. Just spent a bunch but time is $$.

[daverod]

Did'nt like my new paint job of the roof of my 64. Primer it and shot it again sanded it down alittle much better. Painted my fender with some slick sand. I love the smell of that stuff. Sprayed really good booth worked well. Cut out my old heater controll thing and put it in my new dsah. Should work good.

[daverod]

Oh ya fixed a big scrape on my drivers door. And don't forget just say no.Especially when anywhere near Rexburg. Had to say to a good friend for awhile. Just more time and $$ and can spend on my truck. I did find out I drink way to much caffeine.

[daverod]

Sanded down the fenders with some 180. That slicksand is sweet. Sands so nice. Patched a come small spots with some filler, sanded them, sprayed them again with some G2 feather fill. Turned the air up to 35 worked a lot better. I had it set at about 25.Went with the black. If things don't work out so good I'm going to sand the burnt orange down to give it a patina look. So far it looks great.

[bubba327]

Hey Dave-- Pm sent on the brackets - I saw a set in the Jalopy jungle a while back, but I did not need any, So I left them . Not entirely sure if they were 292 brackets or 230/250. Hope they are still there!!!!
There is a difference. You need the style shown in picture #4 or #5 in post 1919 above in this thread.
The short radiator hose turning back under the bracket is the difference. The 230/250 does not have that short hose. Check out post # 28 - bottom picture of "Bubba's Recycling Project" http://67-72chevytrucks.com/vboard/s...=365170&page=2 for a picture of the 230/250 set-up
I can check Wednesday if it is not howling snow. Snowing here big time tonight. Bubba

[daverod]

Originally Posted by bubba327

Hey Dave-- Pm sent on the brackets - I saw a set in the Jalopy jungle a while back, but I did not need any, So I left them . Not entirely sure if they were 292 brackets or 230/250. Hope they are still there!!!!
There is a difference. You need the style shown in picture #4 or #5 in post 1919 above in this thread.
The short radiator hose turning back under the bracket is the difference. The 230/250 does not have that short hose. Check out post # 28 - bottom picture of "Bubba's Recycling Project" http://67-72chevytrucks.com/vboard/s...=365170&page=2 for a picture of the 230/250 set-up
I can check Wednesday if it is not howling snow. Snowing here big time tonight. Bubba

You live in Idaho. Don't let alittle snow stop you. Just take a bigger shovel. I need to go sand some more. Almost have my cab ready. Seeing all these guys knocking out low riders in 6 months is really pissin me off. Of course they seem to have tons of cash. I think that helps. Oh ya and the not painting anything also helps.

[ruffrida2005]

yeah it sucks seeing all these guys drop loads of cash in their truck all at once, But I guess that's how the games played. Atleast you can say that you've built yours and not someone else.

[daverod]

Originally Posted by ruffrida2005

yeah it sucks seeing all these guys drop loads of cash in their truck all at once, But I guess that's how the games played. Atleast you can say that you've built yours and not someone else.

Don't get me wrong I have no problems with dumping tons of cash in my truck. It just take me alittle longer. Gotta spend your $$$ on somthing. I don't plan on taking any with me when I check out of this place. I'm not sure but I think you get 50 virgin trucks and unlimited cutting disks at the next place/planet .

[ruffrida2005]

Man that looks good. Dont you want to paint it before you run the harness in there. I wonder how the wirings going to work on the guages. You'll figure it out.

I'll get it out to you monday if I can.