Junkyard Jimmy Super Low Buck Build Thread - Page 51 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 11-01-2013, 08:05 AM

Quote:

Originally Posted by badpeanut

Your heater core connections are reversed compared to mine and what is shown here (see automatic trans figure): http://67-72chevytrucks.com/vboard/s...7&postcount=18

I know. I have the service manual and know how they are supposed to be.

swamp rat · 11-01-2013, 07:41 PM

Quote:

Originally Posted by badpeanut

Your heater core connections are reversed compared to mine and what is shown here (see automatic trans figure): http://67-72chevytrucks.com/vboard/s...7&postcount=18

+2 I see this a lot too, plus the heater core inlet and outlet are different sizes. So if the core is mounted upside down i imagine it could lead to a problem. Actually that whole thread is worth the read, good info.

hgs_notes · 11-01-2013, 09:51 PM

Badpeanut, the reason I plumbed it this way was just cuz it looks better. There are pro's and cons either way. I appreciate you pointing out the difference though. If someone was gonna use mine as a guide they might not like that it's non-stock.

hgs_notes · 11-06-2013, 11:51 AM

Its a handful on the ice. Fun in the snow.

Low Elco · 11-06-2013, 01:37 PM

Ha Ha! Wheeeee! 4x work good?

TennesseeZ · 11-06-2013, 01:52 PM

YeeeeeeHaaaaaaaaa!!!!!!!!!!!

Might be coming up there soon for work, can't wait to see some snow this winter!

hgs_notes · 11-06-2013, 02:32 PM

Quote:

Originally Posted by Low Elco

Ha Ha! Wheeeee! 4x work good?

I didn't shift it to 4 high until after the picture. It was sloppy wet snow and while I could make progress as a 1 wheel wonder it was easy to pull back on the shifter and pop it into a front/rear 2 wheel wonder. I desperately need to bleed the rear brakes.

Quote:

Originally Posted by TennesseeZ

YeeeeeeHaaaaaaaaa!!!!!!!!!!!

Might be coming up there soon for work, can't wait to see some snow this winter!

You be sure to look me up. I'll PM you my contact info.

Dale99 · 11-06-2013, 04:04 PM

I dont miss that white stuff at all.

hgs_notes · 11-07-2013, 12:23 AM

A couple of things that came up today were that I had a hell of a time starting it and the rear brakes were not grabbing at all (well I knew that last part a while ago, makes for ez brake stands).

I was having some trouble with it sputtering the past couple weeks and then double checked that the manual choke was actually opening and it wasn't. Popped it open and it's running like a champ again. Then today it would not start. It had been flooding with the choke issue so I checked again and sure enough, the cable is binding and keeping it shut too far. If I pull to hard shut it binds up and won't open, so I'm gonna try using some marks on the choke knob shank as a reference.

The brake issue I thought was just that they needed bled again. But while looking things over I found the adjuster on the pass side had popped out of its slot. So I got that back into position, readjusted the pads on both sides, bled the lines again just because, and gave it another test drive...

Test drive SAT. (Abbreviation for satisfactory)

Took it out through a cornfield on the south edge of town. Drove it like I stole it.

swamp rat · 11-07-2013, 01:14 AM

OMG its dirty!

Dale99 · 11-07-2013, 10:40 AM

clean it quick, otherwise that crap wont come off.

**jaros44sr** · 11-07-2013, 01:29 PM

Wow, wish mine looked like that....theres a truck being used properly, nice pics

Wonder if i could paint faux dirt on my truck lol

Low Elco · 11-07-2013, 02:04 PM

AAAAAAK! It's dirty! Right on! Glad the brakes were an easy fix!

hgs_notes · 11-07-2013, 07:00 PM

Quote:

Originally Posted by swamp rat

OMG its dirty!

It had a sore spot so I rubbed some dirt in it.

Quote:

Originally Posted by Dale99

clean it quick, otherwise that crap wont come off.

Kinda like when I was making that face and it stayed that way? My plan was to let it dry and then flake off. Just the beginning of my protective layer so rocks flinging off the tires don't scrath my paint.

Quote:

Originally Posted by jaros44sr

Wow, wish mine looked like that....theres a truck being used properly, nice pics

Wonder if i could paint faux dirt on my truck lol

Thanks, and don't you dare think about faux dirt. That's something some wanna-be would do and would justify immediate forfeiture of your "man card". Just do like I did. Step 1-Build it, step-2 fix it, step-3 test drive it, repeat steps 2 and 3. If you feel step-2 is not required, then step-3 wasn't done properly.

Quote:

Originally Posted by Low Elco

AAAAAAK! It's dirty! Right on! Glad the brakes were an easy fix!

I'm glad they were too. It was about 1 minute of bliss pounding through the cornfield.

I'm getting to the point where I'll have to tear more stuff apart to "finish" it. Gotta pull the rear seat out and the wheel tubs to reseal those and get the bed liner done in the back. I need to do a little cutting and welding to get the roll bar mounted the way I want. Fix the driver side seat mounting (needs a spacer to lift it and more permanent bolting), still need to change lube in the diffs, install the electric fan, fix a few wiring glitches, hook up the stereo (low priority) replace some headlights, replace plug wires, fix gas tank fill hose, fuel gauge, and then decide which way I'm gonna go with bumpers and start working on those.

I have doubts that I will start the suspension changes this winter. And honestly, I'm in no hurry to jump into that. I'm having way too much fun driving it. Can't stand having a laid up vehicle. I have a bunch of vacation days to use up before the end of the year. I have some house projects to tackle but I know there will be several garage days in there too.

Thanks again for the support/encouragement I have received from my fellow gear heads.

Tynee · 11-16-2013, 12:34 AM

Awesome, isn't it great getting to drive it?

hgs_notes · 12-04-2013, 09:58 PM

Quote:

Originally Posted by Tynee

Awesome, isn't it great getting to drive it?

Yes it is.

Finally got back to work on this thing. I went out to the garage and saw that the front left tire was low. So I aired it up and took it for a test drive...

hgs_notes · 12-04-2013, 10:02 PM

Test drive was satisfactory.

That is all.

turp mcspray · 12-04-2013, 10:22 PM

I remember full throttle, cookie fun in my orange blazer. Fun times!!

Vintage Windmills · 12-04-2013, 11:09 PM

Nice pics! Hows the heater work

Looks like Sleepy Eye got more snow that the south metro here!

hgs_notes · 12-04-2013, 11:21 PM

Quote:

Originally Posted by turp mcspray

I remember full throttle, cookie fun in my orange blazer. Fun times!!

My tires are crap for snow. In 2wd it will barely move.

Quote:

Originally Posted by Vintage Windmills

Nice pics! Hows the heater work

Looks like Sleepy Eye got more snow that the south metro here!

We got a good 8" or so and I wanted to get out and enjoy it today before it gets cold. My kids got out early from school today and my son came in asking to take it out.

Glad we didn't get hit like NE MN did. The arrowhead region had 2' this morning and were expecting another foot. I think the snow is here to stay this time.

Here's some video of the fun. I freaking love driving this thing.

Fun in the snow - YouTube

**Tom Vogel** · 12-05-2013, 10:30 AM

Damn... That LOOKS COLD. Im digging my heated Garage..LOL

Low Elco · 12-05-2013, 11:04 AM

Yeeee-Haw!

**Ol Blue K20** · 12-05-2013, 08:24 PM

Wow...I must be a wuss, I got cold watching that...but...it looked like fun!!!

Bomp · 12-05-2013, 09:33 PM

Built for FUN.

Ain't no garage queen

hgs_notes · 12-05-2013, 11:20 PM

Quote:

Originally Posted by Tom Vogel

Damn... That LOOKS COLD. Im digging my heated Garage..LOL

Looks colder than it was. It was almost 30F out. Barely cold enough to snow. I wanted to get out in it yesterday cuz the real cold was moving in. I think our high today was about 6F.

BTW, my garage is heated too. That heater was by far the best spent money in the entire garage.

Quote:

Originally Posted by Low Elco

Yeeee-Haw!

Hick

Quote:

Originally Posted by Ol Blue K20

Wow...I must be a wuss, I got cold watching that...but...it looked like fun!!!

It was a blast. I wanna see how it handles deeper snow, once we get it. Nice thing about the GMC is the all steel grill for busting drifts. Can't do that with a 71-72 blazer without busting the egg crate.

Single digit highs and below zero lows for the next several days. I figured if I was on a snowmobile I'd be in the open, so no top for me. I had my heavy coat on, and knit hat, and gloves. The heater was on. The boy and I were just fine.

Quote:

Originally Posted by Bomp

Built for FUN.

Ain't no garage queen

Nailed it.

It's gonna need a rear locker at least though. Spools are much cheaper. Need to do some parts searching. I used a lock right on my C-10. It's a bit cheaper than replacing the full carrier and it's easy to install. Need to find a bargain though, money is tight.

11-01-2013, 09:51 PM	#1253
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Junkyard Jimmy Super Low Buck Build Thread Badpeanut, the reason I plumbed it this way was just cuz it looks better. There are pro's and cons either way. I appreciate you pointing out the difference though. If someone was gonna use mine as a guide they might not like that it's non-stock. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-06-2013, 11:51 AM	#1254
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Junkyard Jimmy Super Low Buck Build Thread Its a handful on the ice. Fun in the snow. Attached Images __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-06-2013, 01:37 PM	#1255
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Junkyard Jimmy Super Low Buck Build Thread Ha Ha! Wheeeee! 4x work good? __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

11-06-2013, 01:52 PM	#1256
TennesseeZ Countdown Survivor Join Date: Aug 2007 Location: Bean Station, East Tennessee Posts: 9,676	Re: Junkyard Jimmy Super Low Buck Build Thread YeeeeeeHaaaaaaaaa!!!!!!!!!!! Might be coming up there soon for work, can't wait to see some snow this winter! __________________ 93 Yukon 89 Silverado Z71 SWB Sport 91 K 2500 Silverado "Lobuk-Worktruk" A MAN OF HONOR DOES NOT LIE, CHEAT, OR STEAL, NOR TOLERATE THOSE WHO DO. Gettin' old ain't for sissies.

11-06-2013, 04:04 PM	#1258
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Junkyard Jimmy Super Low Buck Build Thread I dont miss that white stuff at all.

11-07-2013, 12:23 AM	#1259
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Junkyard Jimmy Super Low Buck Build Thread A couple of things that came up today were that I had a hell of a time starting it and the rear brakes were not grabbing at all (well I knew that last part a while ago, makes for ez brake stands). I was having some trouble with it sputtering the past couple weeks and then double checked that the manual choke was actually opening and it wasn't. Popped it open and it's running like a champ again. Then today it would not start. It had been flooding with the choke issue so I checked again and sure enough, the cable is binding and keeping it shut too far. If I pull to hard shut it binds up and won't open, so I'm gonna try using some marks on the choke knob shank as a reference. The brake issue I thought was just that they needed bled again. But while looking things over I found the adjuster on the pass side had popped out of its slot. So I got that back into position, readjusted the pads on both sides, bled the lines again just because, and gave it another test drive... Test drive SAT. (Abbreviation for satisfactory) Took it out through a cornfield on the south edge of town. Drove it like I stole it. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

11-07-2013, 01:14 AM	#1260
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Junkyard Jimmy Super Low Buck Build Thread OMG its dirty! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-07-2013, 10:40 AM	#1261
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Junkyard Jimmy Super Low Buck Build Thread clean it quick, otherwise that crap wont come off.

11-07-2013, 01:29 PM	#1262
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Junkyard Jimmy Super Low Buck Build Thread Wow, wish mine looked like that....theres a truck being used properly, nice pics Wonder if i could paint faux dirt on my truck lol __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-07-2013, 02:04 PM	#1263
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Junkyard Jimmy Super Low Buck Build Thread AAAAAAK! It's dirty! Right on! Glad the brakes were an easy fix! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

11-16-2013, 12:34 AM	#1265
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	Re: Junkyard Jimmy Super Low Buck Build Thread Awesome, isn't it great getting to drive it? __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

12-04-2013, 10:02 PM	#1267
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Junkyard Jimmy Super Low Buck Build Thread Test drive was satisfactory. That is all. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

12-04-2013, 10:22 PM	#1268
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Junkyard Jimmy Super Low Buck Build Thread I remember full throttle, cookie fun in my orange blazer. Fun times!! __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

12-04-2013, 11:09 PM	#1269
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Junkyard Jimmy Super Low Buck Build Thread Nice pics! Hows the heater work Looks like Sleepy Eye got more snow that the south metro here! __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

12-05-2013, 10:30 AM	#1271
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Junkyard Jimmy Super Low Buck Build Thread Damn... That LOOKS COLD. Im digging my heated Garage..LOL



Register or Log In To remove these advertisements.

12-05-2013, 11:04 AM	#1272
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Junkyard Jimmy Super Low Buck Build Thread Yeeee-Haw! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

12-05-2013, 08:24 PM	#1273
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Junkyard Jimmy Super Low Buck Build Thread Wow...I must be a wuss, I got cold watching that...but...it looked like fun!!! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

12-05-2013, 09:33 PM	#1274
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: Junkyard Jimmy Super Low Buck Build Thread Built for FUN. Ain't no garage queen

Register or Log In To remove these advertisements.