Project Vitamin C-10 - Page 55 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

protrash64 · 06-13-2009, 12:31 AM

[quote=scotts62;3357084]

I wasn't referring to you man just the shop i worked at. I whine about doing it too but like it.. does that make sense..

I know you weren't, I couldn't believe the van Alan had pictured. I dont mind doing it either but my elbows disagree. How long 'til elbow replacement surgery

...

[QUOTE=Alan's Classic;3357112]Along with all my other projects going on I'm also trying to do a step by step on how to rebuild vent windows. I've got one disassymbled. Now I need to clean and paint the frame and order some glass. Here is one pic of the progress.

I'm following this because I will be doing this in the next couple months

Quote:

Originally Posted by 70 Suburban

Here is the setup

70 Sub sprays with one hand and surfs with other

....wow!

70 Suburban · 06-13-2009, 01:06 AM

its mad skills. that how I learned to spray left handed. ohh and I can switch hands and never let off the trigger or slow down.....lol

jgh64pkup · 06-13-2009, 01:08 AM

Quote:

Originally Posted by protrash64

I'll stop whining about sanding on my warped bedsides now

warped bedsides that sounds familiar

70 Suburban · 06-13-2009, 01:10 AM

lol i have not made it to the bed yet. I still dread the hood. I have a couple of oil can spots.. well one on each side the size of texas

**scotts62** · 06-13-2009, 12:39 PM

Yeah im going to have to order some and try em out.

70 Suburban · 06-13-2009, 11:04 PM

i think you will be hooked. but you have to buy the adapter for your gun. so ether know what you have or what you need. for the sata I had to buy 2. one for the twist lock and one threaded

**scotts62** · 06-14-2009, 01:09 AM

I have the Develbliss threaded, ill check it out from Auto body tool mart.

shortbed70 · 06-15-2009, 05:35 PM

I am going to be getting some from eastwood catalog they have the starter kit for 99.00 and I think it would help using gravity feed while spraying cab roof and underside of fender lips. Glad to see the trucks coming along alan.

SeanPaintsFlames · 06-15-2009, 06:16 PM

I use those PPS liners at the shop, too. What I do, though, instead of letting the paint dry in the cup -'cause that can take forever with base coat- is to pour it in an empty gallon can, then throw the emptied cup away. I use the same gallon can to dispose of left over clear, sealer. primer, and base, so it all dries together. I throw about 5 gallons away a year. THis way, you don't have a bunch of cups crowding your table top like this:

Alan's Classic · 06-15-2009, 08:21 PM

Quote:

Originally Posted by shortbed70

I am going to be getting some from eastwood catalog they have the starter kit for 99.00 and I think it would help using gravity feed while spraying cab roof and underside of fender lips. Glad to see the trucks coming along alan.

I don't think it has been mentioned yet, but you can spray with the PPS upside down if you want. When you first load it turn it upside down and pull the trigger. It sucks all of the air out of the liner and creates a vacumn so no mater how you hold the gun you will have a constant flow of paint.

ruffrida2005 · 06-15-2009, 08:27 PM

I may have to invest in this, beause when I was spraying my dp90 on my frame my hands were coated in it from spraying almost upsidedown

**scotts62** · 06-15-2009, 09:38 PM

Quote:

Originally Posted by Alan's Classic

I don't think it has been mentioned yet, but you can spray with the PPS upside down if you want. When you first load it turn it upside down and pull the trigger. It sucks all of the air out of the liner and creates a vacumn so no mater how you hold the gun you will have a constant flow of paint.

Yep SOLD! I will order them

70 Suburban · 06-15-2009, 09:51 PM

lol good call. the only thing is.. not that it matters for the home use. but they dont give ehough caps for the cups. If you use them in a shaker save the caps.

Alan's Classic · 06-15-2009, 09:57 PM

Quote:

Originally Posted by 70 Suburban

lol good call. the only thing is.. not that it matters for the home use. but they dont give ehough caps for the cups. If you use them in a shaker save the caps.

70 Suburban · 06-15-2009, 10:12 PM

I use a roll of tape on my shaker. I have phumatiic one fromt habor freight. works great.

Strodder · 06-15-2009, 10:24 PM

Man, I'm gone for 4 days and you guys are talking about me...... I didn't do anything.

Alan's Classic · 06-16-2009, 11:46 PM

Quote:

Originally Posted by Strodder

Man, I'm gone for 4 days and you guys are talking about me...... I didn't do anything.

Yeah, you weren't here to defend yourself

**scotts62** · 06-17-2009, 07:29 AM

Quote:

Originally Posted by Alan's Classic

Yeah, you weren't here to defend yourself

Yep fair game

4dranch · 06-17-2009, 07:58 AM

Sorry Alan..................

Strodder · 06-17-2009, 11:10 AM

Quote:

Originally Posted by Alan's Classic

Yeah, you weren't here to defend yourself

Like that would have stopped them.

Alan's Classic · 06-19-2009, 12:17 AM

Quote:

Originally Posted by 4dranch

Sorry Alan..................

I was wondering when you were going to throw that up.

Quote:

Originally Posted by Strodder

Like that would have stopped them.

Your right it doesn't matter if your here or not.

I wish I could post some progress. Not much to speak of. Shannon needed to order some parts from Jegs so I went ahead and ordered some fittings and SS hose for my power steering.

Mike's 64 Short Step told me about a 64 in the July Custom classic Trucks that had a 59 Impala dash in it. Did anyone else see it?

ruffrida2005 · 06-19-2009, 12:55 AM

I was going to tell you about that, I was a nice looking truck, I just got mine in the mail the other day and thought about you. It really fit in the truck. I wonder if he's a board memeber!

Alan's Classic · 06-20-2009, 12:02 AM

Quote:

Originally Posted by ruffrida2005

I was going to tell you about that, I was a nice looking truck, I just got mine in the mail the other day and thought about you. It really fit in the truck. I wonder if he's a board memeber!

I doubt he is a member. if he was I think we would know about it.

I sold a 2 wheel dolly the other day and have been looking for a lift for quite sometime. I found this one today. It's a year old but has never been used. Drove south of Atlanta to pick it up. I got it for less than 1/2 the price new. Now my dilemma is should I use it at home or at work. I'd diffenately use it more at work, but I want it at home too. I might set it up at home and clean it up and make sure it works. Dennis is gonna cringe since I didn't get a 2 post lift.

Strodder · 06-20-2009, 08:40 AM

Quote:

Originally Posted by Alan's Classic

Dennis is gonna cringe since I didn't get a 2 post lift.

Nice find Allan. Those lifts come in handy. Especially with body work, and brake work. You will still be wanting a regular lift though, for under car work. Don't get me wrong, I'm not knocking it, or you for getting it.

4dranch · 06-20-2009, 07:46 PM

Alan,
I agree with Dennis, That lift is not what you need get rid of it and let me know when you do.....and where you put it...

Nice score and I'm sure you will figure where she will most be used at...

06-13-2009, 01:06 AM	#1352
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread its mad skills. that how I learned to spray left handed. ohh and I can switch hands and never let off the trigger or slow down.....lol __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-13-2009, 01:10 AM	#1354
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread lol i have not made it to the bed yet. I still dread the hood. I have a couple of oil can spots.. well one on each side the size of texas __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-13-2009, 12:39 PM	#1355
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My 1965 build thread Yeah im going to have to order some and try em out. __________________ Scott 93 crew cab build Project 62

06-13-2009, 11:04 PM	#1356
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread i think you will be hooked. but you have to buy the adapter for your gun. so ether know what you have or what you need. for the sata I had to buy 2. one for the twist lock and one threaded __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-14-2009, 01:09 AM	#1357
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: My 1965 build thread I have the Develbliss threaded, ill check it out from Auto body tool mart. __________________ Scott 93 crew cab build Project 62

06-15-2009, 05:35 PM	#1358
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: My 1965 build thread I am going to be getting some from eastwood catalog they have the starter kit for 99.00 and I think it would help using gravity feed while spraying cab roof and underside of fender lips. Glad to see the trucks coming along alan. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

06-15-2009, 06:16 PM	#1359
SeanPaintsFlames Registered User Join Date: Feb 2008 Location: Buford, Ga. Posts: 339	Re: My 1965 build thread I use those PPS liners at the shop, too. What I do, though, instead of letting the paint dry in the cup -'cause that can take forever with base coat- is to pour it in an empty gallon can, then throw the emptied cup away. I use the same gallon can to dispose of left over clear, sealer. primer, and base, so it all dries together. I throw about 5 gallons away a year. THis way, you don't have a bunch of cups crowding your table top like this: __________________ My 68 cougar restomod build:HERE Last edited by SeanPaintsFlames; 06-15-2009 at 06:18 PM.

06-15-2009, 08:27 PM	#1361
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: My 1965 build thread I may have to invest in this, beause when I was spraying my dp90 on my frame my hands were coated in it from spraying almost upsidedown __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

06-15-2009, 09:51 PM	#1363
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread lol good call. the only thing is.. not that it matters for the home use. but they dont give ehough caps for the cups. If you use them in a shaker save the caps. __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-15-2009, 10:12 PM	#1365
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread I use a roll of tape on my shaker. I have phumatiic one fromt habor freight. works great. __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

06-15-2009, 10:24 PM	#1366
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread Man, I'm gone for 4 days and you guys are talking about me...... I didn't do anything. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

06-17-2009, 07:58 AM	#1369
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread Sorry Alan.................. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

06-19-2009, 12:55 AM	#1372
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: My 1965 build thread I was going to tell you about that, I was a nice looking truck, I just got mine in the mail the other day and thought about you. It really fit in the truck. I wonder if he's a board memeber! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

06-20-2009, 07:46 PM	#1375
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread Alan, I agree with Dennis, That lift is not what you need get rid of it and let me know when you do.....and where you put it... Nice score and I'm sure you will figure where she will most be used at... __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.