11-19-2012, 01:02 PM | #1451 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
OK, SEMA and the Optima OUSCI. Boy did we see some cool $h!t. Cloud9, Snakebit, and many many more. Getting to meet some of these guys was a treat. So many great stories. The HRIA - a division of SEMA, the Hot Rod Industry Aliance, covers the Hot Rod and Restoration market. At their dinner, they made the announcement that the 'commercial sector' (trucks) was the fastest growing and strongest market. - nice.
Yes, we finaly got an Optima ticket!!!! There were 6 trucks at Optima this year. A clean 29 roadster p/u from Hollywood Hot Rods, that was non-competitive, and 5 C10's. Chris 'Smitty' Smith beautifull deep red 67 Summers and Sons bad black 70 The Roadster Shop's orange and white 72 Hill's blue and white blazer No Limit's red 69 HellBoy We kicked ass. There are 56 competetive entries. The slowest truck placed 24th overall. Trucks finished 12th, 15th, 16th, 22nd, and 24th. Congrats to all of the competitors, they did a great job. I know that StreetTrucks will be covering this event hard core, so keep your eyes open. In Pleasanton we finished 2nd in the pro class. I had some tuning help from Mike Maier, who won the pro class in his 66 mustang with a 29.647. I ran a 29.941 for second, beating Brian Hobaugh's 70 Wilwood Camaro 30.140. Mike had been driving the truck as well and on his last lap of the day, after competetive timing, he ran a 29.430 in the truck, making it un-officially the fasted lap of the weekend. Last weekend in Scottsdale, a three way battle developed in the pro class. RideTech's 33 ford, Roger Burman's 'Crusher' camaro, and our Hellboy C10. When the dust settled, we walked away with the overall win. The lead swapped many times. We ran a 30.341, Burman 30.645, RideTech 30.687. A few C10's were there in the truck class, which was won by the Schwatz chassis 51 chevy. Our win in Scottsdale nets us 11 pro class points, and sows up the championship in Pro Truck. Third time in a row, No Limit takes the National Championship.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
11-19-2012, 01:38 PM | #1452 |
Registered User
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
|
Re: Make it handle
Great job on your evil plan to take over the world!! When I saw you hadn't been on in a minute I looked at the calendar and noticed what time it was. Must be the life!
__________________
Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever! |
11-19-2012, 02:12 PM | #1453 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: Make it handle
Rob, I love the work you've done on HellBoy. We an impressive truck and great showing. Thanks for the facebook pics. You know how to put your money where your mouth is.
Who better to take handling advise from than the 3 time champ!
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 |
11-19-2012, 04:08 PM | #1454 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,901
|
Re: Make it handle
Congrats on the Championship Rob! You're a huge inspiration and this thread has really changed the direction of my truck build. I appreciate the time and knowledge you share with us here.
I do have a technical question; I'm wanting to make the bag mounts on my '66 adjustable so that I can change the pressure in the bag (spring rate) and then reset my ride height by adjusting the bag mounts. This would keep the same suspension height/alignment while being able to quickly and easily adjust the spring rate. Would something similar to stock car/circle track adjustable spring mounts work? They would need to be shorter. Or am I wasting my time? I want to be able to tune the suspension once it's all together, not just have a bunch of pretty go-fast parts bolted together.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
11-19-2012, 04:47 PM | #1455 |
Boosted Member
Join Date: May 2002
Location: Mackinaw, IL
Posts: 2,200
|
Re: Make it handle
^cool idea!
__________________
1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards TURBO ALL THE THINGS!! |
11-19-2012, 10:48 PM | #1456 |
Registered User
Join Date: Sep 2007
Location: Wichita Falls, Texas
Posts: 459
|
Re: Make it handle
I am in the early build stages of an 82 2wd blazer. I have rebuilt the front end with new balljoints and have installed Energy Suspension control arm bushings. I have also moved the lower arm forward 3/4". I have lowered it 5" in the front with 3" spindles and springs and rear I flipped. I haven't decided on sway bar sizes yet but plan both front and rear bars. I am working on the steering currently. I was thinking about installing a fast ratio box on it. What ratio would you recommend?
|
11-19-2012, 11:31 PM | #1457 | |
Registered User
Join Date: Jul 2009
Location: washington
Posts: 4,178
|
Re: Make it handle
Quote:
Ron we need to start bugging the market for steering boxes Posted via Mobile Device
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511 |
|
11-20-2012, 12:43 AM | #1458 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,921
|
Re: Make it handle
Don't count out RedHead steering gears. Do a little searching around the 'net on AGR- they're not always glowing reviews. Not saying its not a good product, but possibly inconsistent quality
Posted via Mobile Device
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
11-20-2012, 12:05 PM | #1459 |
Registered User
Join Date: Nov 2011
Location: Spokane, WA
Posts: 57
|
Re: Make it handle
My $.02 on the adjustable bag mounts is it would be overkill. (Not that I'm not a fan of overkill!)
+/- ~1.5" from the bag's normal height (no pressure) is where the best ride will be. This depends on the bag, pressure, mount angle, etc. and I've also found no matter where I've put the sweet spot, I'm always driving just on the very bottom of that, lol I would think air bag load rates and pressures you want to run would be more important.......
__________________
riding... just riding....... |
11-20-2012, 12:36 PM | #1460 | |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Quote:
For tuning, I use some 1/4" aluminum discs. I start with two discs under the bag on the lower mount. The discs are usually 3 1/2" dia with a 7/16" hole in the middle. The two discs make up for the 1/2" added to the spec height. Then its easy to tune from there, just add or remove discs from there. If you need more adjustment than that, your mounts are way too far off to start with.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
|
11-21-2012, 04:35 AM | #1461 |
Registered User
Join Date: Apr 2008
Location: San Diego California
Posts: 1,316
|
Re: Make it handle
I cannot see where your Pan hard bar is attached to the frame, looks like they are linked together only, is there a piece missing?
Looks great though. Maybe we have started a trend!
__________________
I'd rather attempt something great and fail.. than try something ordinary and succeed. Norman Vincent Peale Project: Barn Raising http://67-72chevytrucks.com/vboard/s...d.php?t=414961 Project: 30 Be Low https://67-72chevytrucks.com/vboard/...d.php?t=830583 |
11-21-2012, 10:48 AM | #1462 | |
Boosted Member
Join Date: May 2002
Location: Mackinaw, IL
Posts: 2,200
|
Re: Make it handle
Quote:
I also still need to box in the frame around the upper shock crossmember and the c-notch.
__________________
1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards TURBO ALL THE THINGS!! |
|
11-21-2012, 12:01 PM | #1463 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,921
|
Re: Make it handle
Member CC69Rat is needing one of those, if you're not using it.
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
11-21-2012, 05:43 PM | #1464 |
Registered User
Join Date: May 2010
Location: Oakland. ca
Posts: 1
|
Re: Make it handle
Does anybody know how to get a 72c10 with trailing arms to hook up.
[i]Posted via Mobile Device[Do/i] |
11-21-2012, 07:31 PM | #1465 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,921
|
Re: Make it handle
Try the drag racing section of the forum: "trucks haulin' more than hay". Those guys have it down to a science
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
11-21-2012, 09:50 PM | #1466 |
Registered User
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
|
Re: Make it handle
Rob, I'm sure you may have missed my last post since you were out running circles around the competition. I'll keep it short and I'll figure out the rest. How do you prefer to treat heated suspension components? We have talked about heating the steering arms to reshape them for correct bump steer. Do you prefer to let them dry naturally or quench them? I know too little about metallurgy but I think a wet rag is quicker than natural cooling but not as bad as using another method that would cool them too fast and make them brittle. Is there another method of cooling I could use? I know its all about reorganizing the molecules but I'm not sure of a homegrown method that is doable.
__________________
Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever! |
11-23-2012, 04:43 PM | #1467 |
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Re: Make it handle
Rob:
How do u suggest adjusting a swaybar? Preload or no preload? Should the end links be adjustable (right hand heim and left hand heim) without unbolting either end, or can they just be a male heim and female heim together which would not let you adjust it unless you take one of the bolts out, shorten or lengthen it, and then rebolting. Should the swaybar arm be parallel to the ground, or is it OK to be pointed up or down somewhat? Any suggestion on pillow blocks? |
11-25-2012, 01:10 AM | #1468 |
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Re: Make it handle
Rob - Forgot:
Link perpendicular to the arm, parallel to the ground????? |
11-26-2012, 12:53 PM | #1469 | |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Quote:
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
|
11-26-2012, 12:56 PM | #1470 | |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Quote:
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
|
11-26-2012, 12:59 PM | #1471 | |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Quote:
Arms should be between parallel to the suspension link travel and the ground. General rules With everything connected, pull the coil-overs and check full suspension travel for binding.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
|
11-26-2012, 01:13 PM | #1472 | ||
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,901
|
Re: Make it handle
Quote:
Quote:
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
||
11-26-2012, 05:17 PM | #1473 |
Registered User
Join Date: May 2012
Location: Raleigh, NC
Posts: 639
|
Re: Make it handle
Question for you Rob... would it be of any benefit to weld the seam that is on top of the rear trailing arms for a c10 1/2 ton? I know ECE sells the reinforcement steel plates that would be a better solution.. but would welding that seam yield any positive results or would it be a waste of time? Thanks
__________________
1970 Chevy C-10 Stepside My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=528167 |
11-26-2012, 07:25 PM | #1474 |
Grandpa in the rustmobile...
Join Date: Nov 2008
Location: Spokane WA/Viola TN
Posts: 11,422
|
Re: Make it handle
I welded and bolted mine (not a full seam but in spots) after Mine split in 2 On the ends...
__________________
John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4 |
11-27-2012, 10:32 AM | #1475 | |
Registered User
Join Date: May 2012
Location: Raleigh, NC
Posts: 639
|
Re: Make it handle
Quote:
This top seam right here:
__________________
1970 Chevy C-10 Stepside My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=528167 |
|
Bookmarks |
|
|