Got Rust? - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyman63 · 03-24-2008, 12:10 AM

Quote:

Originally Posted by Big J

400 sounds like alot. The cheapest price I got on my tub was 250. That was the whole inside and out. Only another 90.00 to put it in primer. I'd call around. Are you using a siphon feed or pressurized blaster? Sand or Black Diamond/Beauty?

Thanks for planting that idea in my mind Big J., I called a couple places in town and found one that will do it for $120 - $180. I will be dropping it off next week.

Big J · 03-24-2008, 12:14 AM

One of the places I called knocked the rest of the companies in my area and wanted 980.00 to do the same work.

vtblazer · 03-24-2008, 03:04 PM

Quote:

Originally Posted by Chevyman63

Thanks for planting that idea in my mind Big J., I called a couple places in town and found one that will do it for $120 - $180. I will be dropping it off next week.

That sounds more along the right price, I had my frame done for $100 bucks even.

We still have three feet of snow on the ground here.

Chevyman63 · 03-24-2008, 04:03 PM

Quote:

Originally Posted by vtblazer

We still have three feet of snow on the ground here.

Wow...I'm sorry to hear that. I've had about all I can take of the white crap this year!

swyfor5 · 03-27-2008, 09:45 AM

Wow, I've been down for a while. But now I'm back with a vengeance! Still collecting parts for my rebuild project on my 1970 K5. Sure love all the threads on this site for inspiration and info! Any inside info on how to post pic's? Am still a real newbie on this computer stuff. Don't mean to highjack the thread. K5 to stay alive!

Chevyman63 · 03-27-2008, 01:52 PM

Glad to see you're back.

Here's a thread that may help.
http://67-72chevytrucks.com/vboard/s...t=posting+pics
If you need any more help, just ask.

Chevyman63 · 04-15-2008, 12:08 AM

Well it's been a while since I've posted on this so...not much progress, but I did score on a pair of inner fenders at a local junkyard. I paid $30 for the pair. They need a little work on the 2 top holes and under the master cylinder, but under the battery box is perfect. I also got a new tank and sender, (thanks Gringoloco). That's all for today.

**jaros44sr** · 04-16-2008, 12:43 AM

Quote:

Originally Posted by Chevyman63

Well it's been a while since I've posted on this so...not much progress, but I did score on a pair of inner fenders at a local junkyard. I paid $30 for the pair. They need a little work on the 2 top holes and under the master cylinder, but under the battery box is perfect. I also got a new tank and sender, (thanks Gringoloco). That's all for today.

Got any rust in them? good price, I was sourcing parts for 5 years, finally getting around to installing them. Fun part, your still in the dog days

Good things will come soon enuff

Hey, how'd the boys corvette turn out?

Chevyman63 · 04-16-2008, 02:17 AM

Quote:

Originally Posted by jaros44sr

Got any rust in them? good price, I was sourcing parts for 5 years, finally getting around to installing them. Fun part, your still in the dog days

Good things will come soon enuff

Hey, how'd the boys corvette turn out?

There's a little rust to fix but not much. I am pretty happy with the deal. Yeah I'm hoping things will start rolling within the next 2 weeks.

The boys Corvette is at the painters. I told him to use it for fill in work, so I think it will be all one color by summer. Thanks for asking.

**jaros44sr** · 04-16-2008, 02:23 AM

Quote:

Originally Posted by Chevyman63

There's a little rust to fix but not much. I am pretty happy with the deal. Yeah I'm hoping things will start rolling within the next 2 weeks.

The boys Corvette is at the painters. I told him to use it for fill in work, so I think it will be all one color by summer. Thanks for asking.

I have a real good drivers side, no rust and don't need now,LMK

**lks dcvn** · 04-19-2008, 02:09 AM

[ThreadJack Started] - jaros44sr - if Tim doesn't want/need the driver side inner fender - bring it up to the 'end of summer' cookout and I will take it off your hands...and drive it back to Toledo (or since you are coming this way we can caravan up together).

My Blazer needs the driver side (currently running without one) inner fender - that would work out great...[ThreadJack Ended]...

By the way Tim - looks good so far -

Hope to meet you this weekend for the tire/rim swap!

**jaros44sr** · 04-19-2008, 02:39 AM

I may have two drivers side, have to check

swyfor5 · 04-19-2008, 08:23 AM

Great to see your going at it cman. Thank's for the welcome back! Still researching my cage/bumper setup, and really ready to get started again. I have aquired quite a few needed parts for my resto, but no actual progress on the project. K5 to stay alive!

vtblazer · 05-17-2008, 11:00 AM

No recent post's...

Did time and money run off together again?

Chevyman63 · 05-17-2008, 01:21 PM

Boy aint it the truth. Those two are notorious for skipping town on me lately.

It's funny that you brought this up, I have plans to tear into it this weekend. It won't be anything exciting, just sand blasting and priming the inner fenders, power steering pump, etc. But I will post pics of whatever I get done.

dirty trucker · 05-17-2008, 10:38 PM

Hey Tim, Did you ever get that frame powder coated yet?? Or did THOSE TWO skip town that week?

Chevyman63 · 05-18-2008, 02:54 PM

Quote:

Originally Posted by dirty trucker

Hey Tim, Did you ever get that frame powder coated yet?? Or did THOSE TWO skip town that week?

Nope...still sitting there.

Time seems to be my biggest problem, too many projects, hobbies, kid related things, etc. I guess it will still be there when I can get the time.

**jaros44sr** · 05-18-2008, 04:10 PM

Quote:

Originally Posted by Chevyman63

Nope...still sitting there.

Time seems to be my biggest problem, too many projects, hobbies, kid related things, etc. I guess it will still be there when I can get the time.

I know all about kid related time. Two sons on travel ice hockey teams=no weekend time

, but it will be the best time you will have with them, they grow up quick. Your projects will always be there, your children won't. Ask me how I know LOL

Chevyman63 · 07-08-2008, 08:37 PM

This is my 19 year old (Sam) at the N.A.S.A. nationals in Ohio, he entered 2 events and took first place in both.

And this is one with my 10 year old (Tyler) with him.

These are two of the reasons I haven't spent much time on my Blazer...but I wouldn't miss these times for anything.

On a progress note though, I'm taking the Blazer frame to get blasted as soon as they can take it...hopefully next week.

vtblazer · 07-09-2008, 06:04 AM

Kid time is job #1 for me too.

Time well invested IMO, nice work Mr. man from Michigan.

Chevyman63 · 07-09-2008, 06:22 AM

Quote:

Originally Posted by vtblazer

Time well invested IMO, nice work Mr. man from Michigan.

Thanks Kurt.

I'll pass the word on to Mr. man from Michigan.

**jaros44sr** · 07-09-2008, 09:28 AM

Quote:

Originally Posted by Chevyman63

Thanks Kurt.

I'll pass the word on to Mr. man from Michigan.

Looks like ya did a fine job raising children....now go master the truck when ya get a minute

Chevyman63 · 07-09-2008, 03:54 PM

Quote:

Originally Posted by jaros44sr

Looks like ya did a fine job raising children....now go master the truck when ya get a minute

Thanks Jim...that sounds like a good plan.

dirty trucker · 07-09-2008, 08:46 PM

Ya Tim, Silver Lake will be closing in 3 months... Your running out of time!!!

BTW, Good-looking young man you have there!!!

Must take after his Mom...

Jtrux · 07-09-2008, 09:06 PM

Quote:

Originally Posted by Chevyman63

This is my 19 year old (Sam) at the N.A.S.A. nationals in Ohio, he entered 2 events and took first place in both.

And this is one with my 10 year old (Tyler) with him.

These are two of the reasons I haven't spent much time on my Blazer...but I wouldn't miss these times for anything.

On a progress note though, I'm taking the Blazer frame to get blasted as soon as they can take it...hopefully next week.

So what were his lifts??

03-24-2008, 12:14 AM	#127
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: Got Rust? One of the places I called knocked the rest of the companies in my area and wanted 980.00 to do the same work. __________________ BAZINGA! My Build

03-27-2008, 09:45 AM	#130
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Got Rust? Wow, I've been down for a while. But now I'm back with a vengeance! Still collecting parts for my rebuild project on my 1970 K5. Sure love all the threads on this site for inspiration and info! Any inside info on how to post pic's? Am still a real newbie on this computer stuff. Don't mean to highjack the thread. K5 to stay alive!

03-27-2008, 01:52 PM	#131
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Got Rust? Glad to see you're back. Here's a thread that may help. http://67-72chevytrucks.com/vboard/s...t=posting+pics If you need any more help, just ask. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

04-15-2008, 12:08 AM	#132
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Got Rust? Well it's been a while since I've posted on this so...not much progress, but I did score on a pair of inner fenders at a local junkyard. I paid $30 for the pair. They need a little work on the 2 top holes and under the master cylinder, but under the battery box is perfect. I also got a new tank and sender, (thanks Gringoloco). That's all for today. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

04-19-2008, 02:09 AM	#136
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,348	Re: Got Rust? [ThreadJack Started] - jaros44sr - if Tim doesn't want/need the driver side inner fender - bring it up to the 'end of summer' cookout and I will take it off your hands...and drive it back to Toledo (or since you are coming this way we can caravan up together). My Blazer needs the driver side (currently running without one) inner fender - that would work out great...[ThreadJack Ended]... By the way Tim - looks good so far - Hope to meet you this weekend for the tire/rim swap!

04-19-2008, 02:39 AM	#137
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Got Rust? I may have two drivers side, have to check __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

04-19-2008, 08:23 AM	#138
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Got Rust? Great to see your going at it cman. Thank's for the welcome back! Still researching my cage/bumper setup, and really ready to get started again. I have aquired quite a few needed parts for my resto, but no actual progress on the project. K5 to stay alive!

05-17-2008, 11:00 AM	#139
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Got Rust? No recent post's... Did time and money run off together again?

05-17-2008, 01:21 PM	#140
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Got Rust? Boy aint it the truth. Those two are notorious for skipping town on me lately. It's funny that you brought this up, I have plans to tear into it this weekend. It won't be anything exciting, just sand blasting and priming the inner fenders, power steering pump, etc. But I will post pics of whatever I get done. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

05-17-2008, 10:38 PM	#141
dirty trucker Registered User Join Date: May 2008 Location: AuGres, Mi Posts: 82	Re: Got Rust? Hey Tim, Did you ever get that frame powder coated yet?? Or did THOSE TWO skip town that week?

07-08-2008, 08:37 PM	#144
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Got Rust? This is my 19 year old (Sam) at the N.A.S.A. nationals in Ohio, he entered 2 events and took first place in both. And this is one with my 10 year old (Tyler) with him. These are two of the reasons I haven't spent much time on my Blazer...but I wouldn't miss these times for anything. On a progress note though, I'm taking the Blazer frame to get blasted as soon as they can take it...hopefully next week. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09 Last edited by Chevyman63; 07-09-2008 at 06:19 AM.

07-09-2008, 06:04 AM	#145
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Got Rust? Kid time is job #1 for me too. Time well invested IMO, nice work Mr. man from Michigan.

07-09-2008, 08:46 PM	#149
dirty trucker Registered User Join Date: May 2008 Location: AuGres, Mi Posts: 82	Re: Got Rust? Ya Tim, Silver Lake will be closing in 3 months... Your running out of time!!! BTW, Good-looking young man you have there!!! Must take after his Mom...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.