The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-28-2009, 05:16 PM   #126
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

So it sounds like you more or less used one point and just snugged it up wrapped around the motor. I can picture what you did in my head. I suppose worst case I can just drop the motor down and roll it out on a jack if I can't figure things out. I'm waiting on another engine stand from a buddy who doesn't need theirs anymore.

I had a lead on a stand, but some how ended up with a 350 on it. hahahaha
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary
kizer is offline   Reply With Quote
Old 03-28-2009, 05:48 PM   #127
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

Quote:
Originally Posted by jason65 View Post
If your interested I saw that LMC just started selling that piece under the front drip rail for $99.95. In case you need it.
Thanks. It appears that every day somebody is selling something more for our trucks.

Hopefully several months from now I'll be ready to start looking for those parts.
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary
kizer is offline   Reply With Quote
Old 03-28-2009, 06:04 PM   #128
jason65
Registerd User
 
jason65's Avatar
 
Join Date: Sep 2008
Location: Oklahoma
Posts: 2,118
Re: Kizer and his 65 here

Hopefully they will start selling everything we need and it will be worth a dam.
Still no cabs or shlong bed sides.
jason65 is offline   Reply With Quote
Old 03-28-2009, 09:56 PM   #129
SlimPikins
Registered User
 
SlimPikins's Avatar
 
Join Date: Feb 2009
Location: Marysville, WA
Posts: 42
Re: Kizer and his 65 here

Don't be afraid to give a holler when you want to pull that motor. I've done a few.
SlimPikins is offline   Reply With Quote
Old 03-29-2009, 10:43 PM   #130
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

Today was a weird day. I'm at home and my wife gets a cell phone call. My father in law who is sometimes so drunk he can't remember his name calls up the wife and says. "Hey I have this 65 sitting back here and I know you husband wants a part or two off of it. You better send him back now before I load it up on the flat bed and have it hauled away."

I was like huh? I've been trying to scam parts forever and I was always told don't even think of it. Then the next time I talk to him he is a 6pack into it and he says "Ah come get things whenever you want to"

Today was a sober day hahahahaha I ran over and grabbed the hood, tail gate, hood hinges and springs, upper radiator supports, latch for the hood. Basically anything I thought wasn't gone.

Here is my old hood. Can you believe its that bad? Man I was blown away when I got it, but figured I'd pickup a hood somewhere.



Like my trailer.



There is a smack in the front passenger side.


Regular rust/hole spot. I was hoping there wasn't any, but hey it at least is light years ahead of my old/blue hood.


I haven't really compared my old tail gate to the new to me, but I think the new to me has less dents and doesn't to have as much stuff floating around inside of it. I'm not sure what I'm going to do with the rest of the little pieces, but I grabbed them anyways just for the heck of it. Maybe I'll throw them up later.

I still think I should go back and grab some more stuff before he crushes it. The cab is well gone. I mean they cut a sun roof in the thing and there is several switches added to the dash and lord only knows what else was ghettoed to the poor thing over the years.

Anyways. I got a new Hood, I got a new Hood. Now I just have to learn how to use a stud welder and whatever else I don't know.
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary
kizer is offline   Reply With Quote
Old 03-29-2009, 10:47 PM   #131
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

Quote:
Originally Posted by SlimPikins View Post
Don't be afraid to give a holler when you want to pull that motor. I've done a few.
You can count on that. I have a picker and some chain/hooks. I'm looking to grab another engine stand that a buddy is trying to get rid of and because I don't want the motor laying on the ground so hopefully in the next 30 or so days. Well that's the idea anyways.
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary

Last edited by kizer; 03-29-2009 at 10:47 PM.
kizer is offline   Reply With Quote
Old 03-29-2009, 10:50 PM   #132
joe231
Registered User
 
joe231's Avatar
 
Join Date: Dec 2007
Location: Palmer, Alaska
Posts: 13,821
Re: Kizer and his 65 here

nice score!!!

hope you pa-in-law don't read this
__________________
CHEVY ONLY
joe231 is offline   Reply With Quote
Old 03-30-2009, 07:40 AM   #133
jason65
Registerd User
 
jason65's Avatar
 
Join Date: Sep 2008
Location: Oklahoma
Posts: 2,118
Re: Kizer and his 65 here

Will he let you drag it home and strip it in your own time? Mabey throw a couple hundred at him and call it your own?
jason65 is offline   Reply With Quote
Old 03-30-2009, 08:38 AM   #134
chevroletrestoguy
Registered User
 
Join Date: Feb 2007
Location: USA
Posts: 201
Re: Kizer and his 65 here

Quote:
Originally Posted by jason65 View Post
If your interested I saw that LMC just started selling that piece under the front drip rail for $99.95. In case you need it.
Jason,
Can you provide a link to this? Thanks.
chevroletrestoguy is offline   Reply With Quote
Old 03-30-2009, 09:47 AM   #135
4dranch
Shloooooong bed member #2
 
4dranch's Avatar
 
Join Date: Aug 2008
Location: Millington Tn.
Posts: 1,864
Re: Kizer and his 65 here

Kizer,
Doesn't matter how bad things look to you on the other truck. I would load that dude up and put it at your place....you will kick your self when you need ..lets say the glove box or you never know...and then it's to late.
__________________
David,

Daughters 66 truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=484601

Learning to drive a 3 on the tree:
http://www.youtube.com/watch?v=CcCMvRgBo1Q
4dranch is offline   Reply With Quote
Old 03-30-2009, 09:58 AM   #136
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

Don't worry I'm headingback over to grab the glovebox door too.

The wife suggested I drag it home as well, but there is so much hacked up stuff in my mind its been already picked through. I thought it would be cool to cut the floor out of it and use it on my truck opposed to buying it out of a catalog. I just don't know how much of it is rotted compaired to mine. They are almost the same, but one has it in places the other doesn't.

I might have to really think hard on this one. I don't know where the title is and how to dispose of a carcus once its been picked over. I know its longbed 4wheel drive with a C10 badge on it. Engine and transmission is gone.
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary
kizer is offline   Reply With Quote
Old 03-30-2009, 10:06 AM   #137
jason65
Registerd User
 
jason65's Avatar
 
Join Date: Sep 2008
Location: Oklahoma
Posts: 2,118
Re: Kizer and his 65 here

Quote:
Originally Posted by chevroletrestoguy View Post
Jason,
Can you provide a link to this? Thanks.
Just search LMC. Long Motor Co.
jason65 is offline   Reply With Quote
Old 03-30-2009, 10:38 AM   #138
chevroletrestoguy
Registered User
 
Join Date: Feb 2007
Location: USA
Posts: 201
Re: Kizer and his 65 here

Quote:
Originally Posted by jason65 View Post
Just search LMC. Long Motor Co.
I did and couldn't find it.
www.lmctruck.com right?
chevroletrestoguy is offline   Reply With Quote
Old 03-30-2009, 12:21 PM   #139
jason65
Registerd User
 
jason65's Avatar
 
Join Date: Sep 2008
Location: Oklahoma
Posts: 2,118
Re: Kizer and his 65 here

You found it just like the indian found his pony.
jason65 is offline   Reply With Quote
Old 03-30-2009, 04:31 PM   #140
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

My wife and my Father in law are Indian. Hahahahaha

Not that has anything to do with anything, but I did see the word indian mentioned.
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary
kizer is offline   Reply With Quote
Old 03-31-2009, 12:42 AM   #141
SlimPikins
Registered User
 
SlimPikins's Avatar
 
Join Date: Feb 2009
Location: Marysville, WA
Posts: 42
Re: Kizer and his 65 here

Quote:
Originally Posted by kizer View Post
I don't know where the title is and how to dispose of a carcus once its been picked over.
Getting rid of it is easy. Just get out the torch and cut it up into manageable pieces and load it up and take it to the recycler.






Quote:
Originally Posted by kizer View Post
I know its longbed 4wheel drive with a C10 badge on it. Engine and transmission is gone.
Hmmmmmmmm, how's the running gear?
SlimPikins is offline   Reply With Quote
Old 03-31-2009, 12:49 AM   #142
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

No hubs up front and the rear spiders I hear are shot.
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary
kizer is offline   Reply With Quote
Old 03-31-2009, 07:30 AM   #143
jason65
Registerd User
 
jason65's Avatar
 
Join Date: Sep 2008
Location: Oklahoma
Posts: 2,118
Re: Kizer and his 65 here

Thats Okie slang for when you or somebody finds something. You find it all at once.
jason65 is offline   Reply With Quote
Old 04-08-2009, 09:41 PM   #144
daverod
SSN 706
 
daverod's Avatar
 
Join Date: Mar 2009
Location: Pocatello Idaho
Posts: 3,821
Re: Kizer and his 65 here

Enjoyed the read Kizer. Got some good pics. I cut up two trucks with a saws all and a good metal blade. It was'nt to bad at all, even kinda fun. Not every day you get to hack up a truck. Later Daverod
daverod is offline   Reply With Quote
Old 04-17-2009, 12:57 PM   #145
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

Welp not much going on. Over the last week Ive had a Sinus Infection and I would almost sware my head was going to explode from the headaches.

Anywho I decided to start looking at the hood and hit it with some primer. I know I need to take it down to bear metal first to really work on it, but I wanted to paint it all one color so I could see the flaws in it. Looks like there are a few creases on the passenger side and a hole on the drivers side.



As well on the passenger side there is a dent, which Im not sure how you would pull it out. Stud welder?

__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary
kizer is offline   Reply With Quote
Old 04-22-2009, 02:25 PM   #146
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

Not much of an update, but I think I have found my goal. I saw this picture in the hubcap thread and I think this is what I really want. Heck I'm even thinking of using the factory HubCaps, but I think I might play with the color abit instead of the shine.



Side Trim I'm not sure of or the custom cab chrome behind the doors. However I really dig the color and the way the grill was all done. The stance might be a little lower than factory, but not slammed because I don't think I want that look as of right now. As well the exhaust might be a little different. Who knows.

Man I love this site because until I saw that truck I was thinking Plain Jane Flat colored paint and who cares wheels. Now seeing it all dolled up I can't help but give it a splash of the factory looking colors and trim.

Sorry too get all excited and really not offer up much other than my excitement.
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary

Last edited by kizer; 04-22-2009 at 02:26 PM.
kizer is offline   Reply With Quote
Old 04-22-2009, 03:01 PM   #147
jason65
Registerd User
 
jason65's Avatar
 
Join Date: Sep 2008
Location: Oklahoma
Posts: 2,118
Re: Kizer and his 65 here

Now that you have a direction, GET BUSY.
jason65 is offline   Reply With Quote
Old 04-22-2009, 08:15 PM   #148
Alan's Classic
1 thing at a time is progress.
 
Alan's Classic's Avatar
 
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
Re: Kizer and his 65 here

Quote:
Originally Posted by jason65 View Post
Now that you have a direction, GET BUSY.
The hard part is over.
Alan's Classic is offline   Reply With Quote
Old 04-22-2009, 08:34 PM   #149
beefshreadder116
Registered User
 
beefshreadder116's Avatar
 
Join Date: Feb 2009
Location: Walla Walla, WA
Posts: 160
Re: Kizer and his 65 here

i have a better hood but i am in walla walla, 5 hours southeast of you
__________________
Projects:
66 gmc, SWB ,BBW,76 disc brakes/PS and rearend, pancaked crossmember 2 1/2" drop spindles 1 cut coil, 6" drop coils 2 " blocks c-notch with a 350.
beefshreadder116 is offline   Reply With Quote
Old 04-23-2009, 11:41 AM   #150
kizer
Its Deja Vu time again
 
kizer's Avatar
 
Join Date: Aug 2008
Location: Marysville, North of Seattle WA
Posts: 815
Re: Kizer and his 65 here

Quote:
Originally Posted by beefshreadder116 View Post
i have a better hood but i am in walla walla, 5 hours southeast of you
Pm on the way.
__________________
Its not pretty but its mine to figure out.
The build / The Photos / Build Diary
kizer is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com