90 burb (( daily dragger)) - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

87 dually burb · 06-09-2010, 10:01 PM

still around just stripped the 84 burb I bought for parts

going to section crossmember this month and install early july
still reworking the rear setup
thinking bag on bar 4 link

justpball · 06-10-2010, 09:34 AM

just to let you know bro, 2in on the crossmember the a-arms will hit the steering stuff. I went 1 5/8 and it was just touching, so I think you should do a 1 5/8 and then 2.5 z...just my 2 cents...

87 dually burb · 06-10-2010, 10:11 PM

one question where is the interference at can I just clearance the end of the lca's or is the steering going to drag on the crossmember

justpball · 06-10-2010, 11:09 PM

Yea it is the steering that hits, I will take some pics sat because I will be under there

ECU PIRATE · 06-11-2010, 04:35 PM

Chris,

When are we going to link up and shoot the s&*t?

87 dually burb · 06-11-2010, 06:52 PM

I'll be around the house all weekend but next weekend I'll be gone for a week to Pa

87 dually burb · 08-01-2010, 11:30 PM

cleaned out garage and insulated it

stuffed burb in garage pulling it apart this week order part this weekend

shortened my honey dew list so had some time for my toys

87 dually burb · 09-29-2010, 08:19 PM

this showed up today

front crossmember is at the LA drop shop
2"section with steering clearance built in

SD trany mount is in
exhaust removed

burb headed to La drop shop next friday to install
4 link, shaved cowl and sectioned crossmember
refinish floor

SBTork · 09-29-2010, 08:45 PM

cool, glad to see progress! Can't wait to see the finished pics of the floor and suspension

87 dually burb · 10-11-2010, 10:07 PM

painted up this week

assembled

installed in truck should be done on tues after work swapping to rack-n-pinion steering for clearence issues

justpball · 10-12-2010, 09:51 AM

need bigger pics bro!!!

87 dually burb · 10-12-2010, 09:09 PM

I down loaded them small on phtobucket and seem to get them any bigger
not a tech geek LOL

*87 chevy silverado* · 10-12-2010, 09:20 PM

looking good i have the same problem with photo bucket

justpball · 10-12-2010, 09:24 PM

You must be grabbing the wrong code, looks like you are grabbing the thumb nail code
Posted via Mobile Device

87 dually burb · 10-12-2010, 09:52 PM

I just tried all 4 options 2 are photos that size one is a link and one is just five lines of characters

87 dually burb · 10-13-2010, 07:45 PM

crossmember is in swapping in a mustang rack
hope to start the 4 linkend of month

SBTork · 10-13-2010, 10:04 PM

Make sure to take pics of the rack install if possible. I am interested to see how you are going to mount it.

87 dually burb · 10-16-2010, 05:18 PM

will do going to order rack stuff after freakshow next weekend so my be a few weeks till that gets started

Mkcustums · 11-13-2010, 08:24 AM

If you want, email me the pics and I'll post them for ya. I PM'd ya my email address earlier tonight. If you have others I can post those for ya too.

Da88burban · 03-20-2011, 11:31 PM

Any updates?

87 dually burb · 04-13-2011, 11:03 PM

just had the 4 link done shop is boxing the the rear frame waiting on lower bar changed them to 2x2 , next having the front frame notched for steering decided to keep stock steering just moving it to work thinking about frame mods change it out for 2x4 and cut off pinch welds

87 dually burb · 05-14-2011, 10:07 PM

waiting on parts

Tony_SS · 06-03-2011, 12:33 AM

Is it me or do the pics in this thread keep getting smaller? lol

kikkegek · 06-03-2011, 06:12 AM

subcribing for bigger pics!

87 dually burb · 11-30-2011, 01:42 PM

back half all painted up(bars are powder coated with purple flakes

carrier mount was trimmed so frame lays flat on ground

burb got put aside for awhile but back at it again
just order a porterbuilt filler panel for firewall and waiting on a reply about a drop member front end

06-09-2010, 10:01 PM	#126
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) still around just stripped the 84 burb I bought for parts going to section crossmember this month and install early july still reworking the rear setup thinking bag on bar 4 link __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

06-10-2010, 09:34 AM	#127
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) just to let you know bro, 2in on the crossmember the a-arms will hit the steering stuff. I went 1 5/8 and it was just touching, so I think you should do a 1 5/8 and then 2.5 z...just my 2 cents... __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

06-10-2010, 10:11 PM	#128
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) one question where is the interference at can I just clearance the end of the lca's or is the steering going to drag on the crossmember __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

06-10-2010, 11:09 PM	#129
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) Yea it is the steering that hits, I will take some pics sat because I will be under there __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

06-11-2010, 04:35 PM	#130
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: 90 burb (( daily dragger)) Chris, When are we going to link up and shoot the s&*t? __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

06-11-2010, 06:52 PM	#131
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) I'll be around the house all weekend but next weekend I'll be gone for a week to Pa __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

08-01-2010, 11:30 PM	#132
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) cleaned out garage and insulated it stuffed burb in garage pulling it apart this week order part this weekend shortened my honey dew list so had some time for my toys __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

09-29-2010, 08:19 PM	#133
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) this showed up today front crossmember is at the LA drop shop 2"section with steering clearance built in SD trany mount is in exhaust removed burb headed to La drop shop next friday to install 4 link, shaved cowl and sectioned crossmember refinish floor __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

09-29-2010, 08:45 PM	#134
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: 90 burb (( daily dragger)) cool, glad to see progress! Can't wait to see the finished pics of the floor and suspension __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

10-11-2010, 10:07 PM	#135
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) painted up this week assembled installed in truck should be done on tues after work swapping to rack-n-pinion steering for clearence issues __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-12-2010, 09:51 AM	#136
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) need bigger pics bro!!! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

10-12-2010, 09:09 PM	#137
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) I down loaded them small on phtobucket and seem to get them any bigger not a tech geek LOL __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-12-2010, 09:20 PM	#138
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: 90 burb (( daily dragger)) looking good i have the same problem with photo bucket

10-12-2010, 09:24 PM	#139
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) You must be grabbing the wrong code, looks like you are grabbing the thumb nail code Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

10-12-2010, 09:52 PM	#140
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) I just tried all 4 options 2 are photos that size one is a link and one is just five lines of characters __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************



Register or Log In To remove these advertisements.

10-13-2010, 07:45 PM	#141
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) crossmember is in swapping in a mustang rack hope to start the 4 linkend of month __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-13-2010, 10:04 PM	#142
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: 90 burb (( daily dragger)) Make sure to take pics of the rack install if possible. I am interested to see how you are going to mount it. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

10-16-2010, 05:18 PM	#143
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) will do going to order rack stuff after freakshow next weekend so my be a few weeks till that gets started __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me**************** Last edited by 87 dually burb; 10-16-2010 at 05:18 PM.

11-13-2010, 08:24 AM	#144
Mkcustums Registered User Join Date: Oct 2007 Location: Wilsonville Or Posts: 705	Re: 90 burb (( daily dragger)) If you want, email me the pics and I'll post them for ya. I PM'd ya my email address earlier tonight. If you have others I can post those for ya too.

03-20-2011, 11:31 PM	#145
Da88burban GM's 4 Life Join Date: Sep 2010 Location: Greenwood, SC Posts: 363	Re: 90 burb (( daily dragger)) Any updates? __________________ Jack '54 Chevy 3100 "Just a Mess" '74 Chevy Super 10 468BB "One Fast Rust Bucket" '86 Pontiac Fiero GT '88 Chevy burb "Tha Big Turd" '93 GMC Safari "Bone Crusher" .................____________ .............../______l___\|___\____ ;,;,;,;,;,;,;\|__(O)_\| __l___l__(O) \|

04-13-2011, 11:03 PM	#146
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) just had the 4 link done shop is boxing the the rear frame waiting on lower bar changed them to 2x2 , next having the front frame notched for steering decided to keep stock steering just moving it to work thinking about frame mods change it out for 2x4 and cut off pinch welds __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

05-14-2011, 10:07 PM	#147
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) waiting on parts Attached Images __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

06-03-2011, 12:33 AM	#148
Tony_SS Registered User Join Date: Dec 2008 Location: Washington, MO Posts: 643	Re: 90 burb (( daily dragger)) Is it me or do the pics in this thread keep getting smaller? lol

06-03-2011, 06:12 AM	#149
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: 90 burb (( daily dragger)) subcribing for bigger pics! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

11-30-2011, 01:42 PM	#150
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) back half all painted up(bars are powder coated with purple flakes carrier mount was trimmed so frame lays flat on ground burb got put aside for awhile but back at it again just order a porterbuilt filler panel for firewall and waiting on a reply about a drop member front end __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

Register or Log In To remove these advertisements.