1967 C-10 LS POWERED Build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pro Performance · 03-23-2012, 07:24 PM

Just came across this thread, very nice! I dig the wheel and tires and the whole look of it.

LSPWRD67CHEVY · 04-08-2012, 12:19 PM

Well guys I finally got to fire this thing up for a bit yesterday, still got alot to do and alot more money to spend lol! heres a video if I can post it right..

http://youtu.be/OfpGuGXZ9Dw

shortbed70 · 04-08-2012, 03:22 PM

Sounds wicked!
Posted via Mobile Device

pacman1967 · 04-08-2012, 07:34 PM

I love this truck, its done right with out going way over the top. Keep up the great work man.

**Captainfab** · 04-08-2012, 09:16 PM

I agree

Quote:

Originally Posted by shortbed70

Sounds wicked!
Posted via Mobile Device

Super73 · 04-08-2012, 11:57 PM

Sounds perty nice..

GMC70c20 · 04-13-2012, 02:24 AM

did you run the factory truck acc. and just take the power sterring pump off then get a shorter belt?

will scratch · 04-13-2012, 08:51 PM

About jumped out of the chair, lol, need to turn the volume down.

LSPWRD67CHEVY · 04-13-2012, 11:13 PM

Quote:

Originally Posted by GMC70c20

did you run the factory truck acc. and just take the power sterring pump off then get a shorter belt?

Exactly.
Posted via Mobile Device

LSPWRD67CHEVY · 04-14-2012, 10:17 AM

Finally found me a short bed! It's in pretty good shape. Dad and me are going to pick it up within the next few hours. I'll post up some pics when I get it home.

LSPWRD67CHEVY · 04-14-2012, 10:13 PM

Managed to get the bed picked up today and back to the shop. We started by taking the floor out of it, which consisted of a torch and a hammer lol! and after that back the truck underneath it and doing a little mach up. It's been 9 years since i've seen any kind of bed on this truck, its hard to get use to again lol. Only thing im having trouble with taking in is the gap between the cab and bed. the holes all line up fine its just been so long to remember what it use to look like. If anyone would post up a pic for me that would be great thanks!

LSPWRD67CHEVY · 04-14-2012, 10:15 PM

...

LSPWRD67CHEVY · 04-14-2012, 10:20 PM

..

LSPWRD67CHEVY · 04-14-2012, 10:25 PM

...

fastwillie 696969 · 04-15-2012, 02:19 AM

Quote:

Originally Posted by LSPWRD67CHEVY

Thanks man. For some reason I just had to have them. It was a little extra work drilling the rotors and the axles, but it was worth it!

i had to shave the hub to fit the wheel on the front too

LSPWRD67CHEVY · 04-15-2012, 09:46 AM

Quote:

Originally Posted by fastwillie 696969

i had to shave the hub to fit the wheel on the front too

Yeah forgot to mention that. we had it turned down at the machine shop.

onyx02ss · 04-25-2012, 09:13 AM

Just joined this forum...just subscribed to this thread... Beautiful job...love the color!

-Scott

7dee2 · 04-25-2012, 10:36 AM

Great score on the bed.. Can't wait to see it in that beautiful shade of blue!

LSPWRD67CHEVY · 09-19-2012, 11:15 PM

Haven't updated in awhile. Its getting closer and closer, but the closer it gets the more money i shell out. anyways.. got some pics of some progress. I went with the autometer gauges and the dolphin billet panel. I got the flaming river column from Frank. Got the rear end built last weekend. Went with Richmond 4.10 and a Detroit TrueTrac Locker. Installed it all with the richmond installation kit. Got the cross member plates made for the trailing arms to get the pinion angle correct.

LSPWRD67CHEVY · 09-19-2012, 11:27 PM

Got the brackets made for the fuel cell. Made some aluminum brackets for the radiator support.

67BBC · 09-20-2012, 10:49 AM

Really looking good.. Great work

GMR-PERFORMANCE · 09-20-2012, 01:57 PM

What did you use to record the vid?? I want to post up a clip but my new galaxy III freaks out with the ex noise?? the clip sounds like crap..

LSPWRD67CHEVY · 09-20-2012, 02:12 PM

Quote:

Originally Posted by GMR-PERFORMANCE

What did you use to record the vid?? I want to post up a clip but my new galaxy III freaks out with the ex noise?? the clip sounds like crap..

I used YouTube.
Posted via Mobile Device

GMR-PERFORMANCE · 09-20-2012, 02:53 PM

No I mean, what device to do the recording, phone cam corder.. etc

LSPWRD67CHEVY · 09-20-2012, 02:59 PM

Quote:

Originally Posted by GMR-PERFORMANCE

No I mean, what device to do the recording, phone cam corder.. etc

iPhone 4
Posted via Mobile Device

03-23-2012, 07:24 PM	#126
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: 1967 C-10 LS POWERED Build Just came across this thread, very nice! I dig the wheel and tires and the whole look of it.

04-08-2012, 12:19 PM	#127
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build Well guys I finally got to fire this thing up for a bit yesterday, still got alot to do and alot more money to spend lol! heres a video if I can post it right.. http://youtu.be/OfpGuGXZ9Dw __________________ 1967 C-10 (project) 1964 Pontiac Lemans (Treasure lol) 2009 GMC Denali Truck (DD) Last edited by LSPWRD67CHEVY; 04-08-2012 at 12:28 PM.

04-08-2012, 03:22 PM	#128
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: 1967 C-10 LS POWERED Build Sounds wicked! Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

04-08-2012, 07:34 PM	#129
pacman1967 Registered User Join Date: Sep 2011 Location: Dannebrog NE Posts: 125	Re: 1967 C-10 LS POWERED Build I love this truck, its done right with out going way over the top. Keep up the great work man. __________________ Marcus 1985 swb C10 Supercharged357/TH400 1972 lwb C20, Grandpa Al's Truck

04-08-2012, 11:57 PM	#131
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: 1967 C-10 LS POWERED Build Sounds perty nice.. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

04-13-2012, 02:24 AM	#132
GMC70c20 Registered User Join Date: Feb 2003 Location: Iowa Posts: 974	Re: 1967 C-10 LS POWERED Build did you run the factory truck acc. and just take the power sterring pump off then get a shorter belt? __________________ 1970 c20 converted to c10 sleeper 1979 c20 the wood hauler 1991 honda civic daily driver spray and pray baby

04-13-2012, 08:51 PM	#133
will scratch Registered User Join Date: Mar 2010 Location: wichita kansas Posts: 22	Re: 1967 C-10 LS POWERED Build About jumped out of the chair, lol, need to turn the volume down. __________________ 79 2wd Blazer/ flip kit, drop spindles, drop springs. 355 c.i. sbc, 350 tranny

04-14-2012, 10:17 AM	#135
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build Finally found me a short bed! It's in pretty good shape. Dad and me are going to pick it up within the next few hours. I'll post up some pics when I get it home. __________________ 1967 C-10 (project) 1964 Pontiac Lemans (Treasure lol) 2009 GMC Denali Truck (DD)

04-14-2012, 10:13 PM	#136
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build Managed to get the bed picked up today and back to the shop. We started by taking the floor out of it, which consisted of a torch and a hammer lol! and after that back the truck underneath it and doing a little mach up. It's been 9 years since i've seen any kind of bed on this truck, its hard to get use to again lol. Only thing im having trouble with taking in is the gap between the cab and bed. the holes all line up fine its just been so long to remember what it use to look like. If anyone would post up a pic for me that would be great thanks! Attached Images __________________ 1967 C-10 (project) 1964 Pontiac Lemans (Treasure lol) 2009 GMC Denali Truck (DD)

04-14-2012, 10:15 PM	#137
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build ... Attached Images __________________ 1967 C-10 (project) 1964 Pontiac Lemans (Treasure lol) 2009 GMC Denali Truck (DD)

04-14-2012, 10:20 PM	#138
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build .. Attached Images __________________ 1967 C-10 (project) 1964 Pontiac Lemans (Treasure lol) 2009 GMC Denali Truck (DD)

04-14-2012, 10:25 PM	#139
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build ... Attached Images __________________ 1967 C-10 (project) 1964 Pontiac Lemans (Treasure lol) 2009 GMC Denali Truck (DD)

04-25-2012, 09:13 AM	#142
onyx02ss Registered User Join Date: Apr 2012 Location: New York Posts: 1	Re: 1967 C-10 LS POWERED Build Just joined this forum...just subscribed to this thread... Beautiful job...love the color! -Scott __________________ 2011 Chevrolet Silverado LT 1500 2003 Chevrolet Corvette Z06 2002 Chevrolet Camaro SS 1968 Chevrolet Camaro Sport Coupe

04-25-2012, 10:36 AM	#143
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,998	Re: 1967 C-10 LS POWERED Build Great score on the bed.. Can't wait to see it in that beautiful shade of blue! __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

09-19-2012, 11:15 PM	#144
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build Haven't updated in awhile. Its getting closer and closer, but the closer it gets the more money i shell out. anyways.. got some pics of some progress. I went with the autometer gauges and the dolphin billet panel. I got the flaming river column from Frank. Got the rear end built last weekend. Went with Richmond 4.10 and a Detroit TrueTrac Locker. Installed it all with the richmond installation kit. Got the cross member plates made for the trailing arms to get the pinion angle correct. Attached Images __________________ 1967 C-10 (project) 1964 Pontiac Lemans (Treasure lol) 2009 GMC Denali Truck (DD) Last edited by LSPWRD67CHEVY; 09-19-2012 at 11:23 PM.



Register or Log In To remove these advertisements.

09-19-2012, 11:27 PM	#145
LSPWRD67CHEVY Registered User Join Date: Aug 2009 Location: Shawnee, OK Posts: 106	Re: 1967 C-10 LS POWERED Build Got the brackets made for the fuel cell. Made some aluminum brackets for the radiator support. Attached Images __________________ 1967 C-10 (project) 1964 Pontiac Lemans (Treasure lol) 2009 GMC Denali Truck (DD)

09-20-2012, 10:49 AM	#146
67BBC Registered User Join Date: Dec 2008 Location: Cement, Ok Posts: 23	Re: 1967 C-10 LS POWERED Build Really looking good.. Great work __________________ 72 SNB Drag truck 67 Project (Sold) 85 4x4 11 Z71

09-20-2012, 01:57 PM	#147
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: 1967 C-10 LS POWERED Build What did you use to record the vid?? I want to post up a clip but my new galaxy III freaks out with the ex noise?? the clip sounds like crap.. __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

09-20-2012, 02:53 PM	#149
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: 1967 C-10 LS POWERED Build No I mean, what device to do the recording, phone cam corder.. etc __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

Register or Log In To remove these advertisements.