KS 72 1/2 2wd getting parted now - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Razor454 · 08-27-2013, 11:22 AM

That's a good price, is that just the top section, or the whole roof including the back with window? Please pm a pic or too if possible. Thanks
Posted via Mobile Device

teeitup · 08-27-2013, 01:06 PM

Eric, I will be at the house then you can follow me to course

Razor454, I usually cut them at lower back window and at lower front post, all I have is a torch though. Pics tonight

Thanks Randy

TOMMY70C10 · 08-27-2013, 01:56 PM

Do you still have the mirrors? If so what is the condition and the best you can do shipped? Thanks tommy

TOMMY70C10 · 08-27-2013, 03:10 PM

Quote:

Originally Posted by tommy70c10

do you still have the mirrors? If so what is the condition and the best you can do shipped? Thanks tommy

zip would help 65655 thanks tommy

teeitup · 08-27-2013, 03:59 PM

Tommy, I'll see if they are still out there tonight

Thanks Randy

White70C20 · 08-27-2013, 04:12 PM

Hi. Is the bench seat still in the truck? Is it original?
Also, I am needing a '69-72 Steering wheel. Do you have any of those?

RCbowtie69 · 08-27-2013, 08:25 PM

Quote:

Originally Posted by teeitup

Randy, just checked the mail, it came today, I'll get them mailed out to you asap. Thanks Randy

Thanks Randy,gald to do business with you.Thanks again,

teeitup · 08-27-2013, 08:57 PM

White70C20, sorry seat is junk and also sorry no good steering wheels right now

Randy, always a pleasure

Thanks Randy

teeitup · 08-27-2013, 09:08 PM

Tommy70c10, they are bad shape, sorry. Thanks Randy

teeitup · 08-27-2013, 09:11 PM

Razor454, I need to pull windshield and make sure no rust on top lip or bottom lip, there is one spot above driver sunvisor, but I do not think its rusted through

teeitup · 08-27-2013, 09:11 PM

more of it, 3rd pic is usually where I cut it, where would you want it cut?

TOMMY70C10 · 08-28-2013, 09:08 AM

Quote:

Originally Posted by teeitup

tommy70c10, they are bad shape, sorry. Thanks randy

ok thanks for checking
tommy

Razor454 · 08-29-2013, 08:33 PM

Hi Randy,

Very tempting....looks like a decent roof. I think I would like it cut below the "bed line" and at the very bottom of the front posts. This way I could determine if I want the back glass, as I currently have a small window. I'll let you know, as I'm still looking locally, but your only about a 7.5 hr drive from me.

Thanks, Mark

**19702wdc10** · 08-29-2013, 09:48 PM

Quote:

Originally Posted by teeitup

702wdC10, I have one out there $65 shipped

Jace, I have all that out there, and also your inner grill

Russ, glad they got there OK, THANKS

Eric, I cut it.

Thanks Randy

Does the PS box have the rag joint and will it need a rebuild?
Thanks
Joe

dave68 · 08-29-2013, 10:13 PM

Hi,
Is the radiator any good? I am assuming it is a 3 row? Can you test the brake booster to see if it holds vacuum? If these two units are good, I would like to buy them. Thanks in advance! -Dave

teeitup · 08-30-2013, 06:57 AM

Tommy, no problem

Mark, I can cut it there no problem, just let me know

Joe, it has rag joint with it. It appears to be good but I can't guarantee it it

Dave, Radiator and booster have been sold, sorry.

Thanks Randy

RCbowtie69 · 08-30-2013, 12:35 PM

Hey Randy,got the heater controls & delete plate today.Thanks for the speeded dlivery

1982shawn · 09-02-2013, 10:40 PM

How much for the grill insert? Got pictures of its condition after removal? Im also looking for a cab back end (to repair an old camper walk through) all those ive found nobody is willing to ship though. Why is everyone afraid of freight lol

teeitup · 09-03-2013, 06:59 AM

Randy glad there got there in safe condition, Thanks as always

1982Shawn, sorry inner grill has been sold and also sorry I don't ship cab sections

Thanks Randy

Codymartinsen · 09-09-2013, 07:43 PM

Do you have a clean 72 grill bowtie available?

ls1nova71 · 09-16-2013, 11:45 PM

Hey Randy, not sure if you have any frames you're going to be cutting up any time soon, but I need an odd part. I need both left and right sides where the emergency brake cable goes into the frame. Here's a pic circled in red what I need. Let me know if you might have it, Thanks, Eric

mmiddle · 09-17-2013, 12:13 AM

Driver side vent window? shipped to 76239

dazza · 09-17-2013, 03:04 AM

hey Randy, hows about...

drivers side door latch control

and/or

drivers side fender brace, in front of rear tire,?

->94505

Thanks

---

teeitup · 09-17-2013, 07:10 AM

Cody, sorry no good bowties

Eric, I have one frame out there yet, I should be cutting it up this weekend

mmiddle, $15 plus shipping for it

dazza, I'll have to look on door latch, sorry no bed braces right now

Thanks Randy

kaphillips · 09-17-2013, 09:38 AM

Randy how much for the complete seat belt set, sunvisors, and rear view mirror shipped to Amarillo tx 79106.

08-27-2013, 11:22 AM	#126
Razor454 Registered User Join Date: Feb 2004 Location: Stokesdale, North Carolina Posts: 341	Re: 72 1/2 2wd getting parted now That's a good price, is that just the top section, or the whole roof including the back with window? Please pm a pic or too if possible. Thanks Posted via Mobile Device __________________ 1967 SwB, 454 BB, 4L80E trans, 3.73 eaton posi 1997 C2500 Ext Cab 5.7 Liter 1955 3/4 ton 1st series w/ 235 straight six Sold it

08-27-2013, 01:06 PM	#127
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now Eric, I will be at the house then you can follow me to course Razor454, I usually cut them at lower back window and at lower front post, all I have is a torch though. Pics tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-27-2013, 01:56 PM	#128
TOMMY70C10 Registered User Join Date: Sep 2012 Location: Wasola, MO Posts: 28	Re: 72 1/2 2wd getting parted now Do you still have the mirrors? If so what is the condition and the best you can do shipped? Thanks tommy __________________ 1970 CHEVY C10 GETTING THERE

08-27-2013, 03:59 PM	#130
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now Tommy, I'll see if they are still out there tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-27-2013, 04:12 PM	#131
White70C20 Registered User Join Date: Oct 2012 Location: Kansas and Iowa Posts: 349	Re: 72 1/2 2wd getting parted now Hi. Is the bench seat still in the truck? Is it original? Also, I am needing a '69-72 Steering wheel. Do you have any of those? __________________ White70C20 1970 Blue C20 - 250, 4 speed 1985 Ford Thunderbird 2005 Pontiac G6

08-27-2013, 08:57 PM	#133
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now White70C20, sorry seat is junk and also sorry no good steering wheels right now Randy, always a pleasure Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-27-2013, 09:08 PM	#134
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now Tommy70c10, they are bad shape, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-27-2013, 09:11 PM	#135
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now Razor454, I need to pull windshield and make sure no rust on top lip or bottom lip, there is one spot above driver sunvisor, but I do not think its rusted through Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-27-2013, 09:11 PM	#136
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now more of it, 3rd pic is usually where I cut it, where would you want it cut? Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-29-2013, 08:33 PM	#138
Razor454 Registered User Join Date: Feb 2004 Location: Stokesdale, North Carolina Posts: 341	Re: 72 1/2 2wd getting parted now Hi Randy, Very tempting....looks like a decent roof. I think I would like it cut below the "bed line" and at the very bottom of the front posts. This way I could determine if I want the back glass, as I currently have a small window. I'll let you know, as I'm still looking locally, but your only about a 7.5 hr drive from me. Thanks, Mark __________________ 1967 SwB, 454 BB, 4L80E trans, 3.73 eaton posi 1997 C2500 Ext Cab 5.7 Liter 1955 3/4 ton 1st series w/ 235 straight six Sold it

08-29-2013, 10:13 PM	#140
dave68 Registered User Join Date: Jun 2011 Location: Buffalo, Mo Posts: 14	Re: 72 1/2 2wd getting parted now Hi, Is the radiator any good? I am assuming it is a 3 row? Can you test the brake booster to see if it holds vacuum? If these two units are good, I would like to buy them. Thanks in advance! -Dave

08-30-2013, 06:57 AM	#141
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now Tommy, no problem Mark, I can cut it there no problem, just let me know Joe, it has rag joint with it. It appears to be good but I can't guarantee it it Dave, Radiator and booster have been sold, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-30-2013, 12:35 PM	#142
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: 72 1/2 2wd getting parted now Hey Randy,got the heater controls & delete plate today.Thanks for the speeded dlivery __________________ My Truck: 2.5 drop front, 4 & 5/8 in rear, 350cubic in. been bored .60 over, 700r4 (soon), 3 speed (on tree for now).rims & tires size,15x8 ralleys 5 on 5,P275/60R15. Members I have met: Pickupman, 1972 Super Cheyenne, Stepside,Chis Mc Bride. tsnow67,joel.e,

09-02-2013, 10:40 PM	#143
1982shawn Registered User Join Date: Aug 2013 Location: Washington D.C. Posts: 8	Re: 72 1/2 2wd getting parted now How much for the grill insert? Got pictures of its condition after removal? Im also looking for a cab back end (to repair an old camper walk through) all those ive found nobody is willing to ship though. Why is everyone afraid of freight lol

09-03-2013, 06:59 AM	#144
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now Randy glad there got there in safe condition, Thanks as always 1982Shawn, sorry inner grill has been sold and also sorry I don't ship cab sections Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

09-09-2013, 07:43 PM	#145
Codymartinsen Registered User Join Date: Jul 2013 Location: Jackson, CA Posts: 29	Re: 72 1/2 2wd getting parted now Do you have a clean 72 grill bowtie available? __________________ codymartinsen '72 SWB Highlander

09-16-2013, 11:45 PM	#146
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,119	Re: 72 1/2 2wd getting parted now Hey Randy, not sure if you have any frames you're going to be cutting up any time soon, but I need an odd part. I need both left and right sides where the emergency brake cable goes into the frame. Here's a pic circled in red what I need. Let me know if you might have it, Thanks, Eric __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

09-17-2013, 12:13 AM	#147
mmiddle Registered User Join Date: Jul 2013 Location: Forestburg, Texas Posts: 659	Re: 72 1/2 2wd getting parted now Driver side vent window? shipped to 76239 __________________ Mark Jesus is the Way! 2003 2500HD CCLB Duramax/Ali (Clifford) 2014 2SS/RS black on black Camaro (Betty) 2006 Pontiac SOLSTICE silver/black (Lula-Bell) 1970 C/10 Short Wide (Peggy) 1964 C/10 Short Step (Hambone) RIP Jimmy Hamilton Thank you for the trucks

09-17-2013, 03:04 AM	#148
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: 72 1/2 2wd getting parted now hey Randy, hows about... drivers side door latch control and/or drivers side fender brace, in front of rear tire,? ->94505 Thanks --- Attached Images __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

09-17-2013, 07:10 AM	#149
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 1/2 2wd getting parted now Cody, sorry no good bowties Eric, I have one frame out there yet, I should be cutting it up this weekend mmiddle, $15 plus shipping for it dazza, I'll have to look on door latch, sorry no bed braces right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-17-2013, 09:38 AM	#150
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: 72 1/2 2wd getting parted now Randy how much for the complete seat belt set, sunvisors, and rear view mirror shipped to Amarillo tx 79106.

Register or Log In To remove these advertisements.