KS Parting a 70 custom 10 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Already Gone** · 09-26-2014, 03:47 PM

Mike, my stuff arrived today and thank you for the fast service.

freezmcnally · 09-27-2014, 12:23 AM

I'd like the radio if it works pm me

**Cash3481** · 09-27-2014, 12:22 PM

Quote:

Originally Posted by CUSTOM/10

Hey Mike !
Got the radio brackets, just what I needed...
Thanks...
Gary

Very good!

Quote:

Originally Posted by Already Gone

Mike, my stuff arrived today and thank you for the fast service.

Welcome!

Quote:

Originally Posted by freezmcnally

I'd like the radio if it works pm me

Radio is gone sorry!

**IronCanine** · 09-27-2014, 01:42 PM

Upper door panel trim available? If so how much for trim and glovebox door shipped to 30606?

Thanks,

Brad

**Cash3481** · 09-27-2014, 02:16 PM

Quote:

Originally Posted by IronCanine

Upper door panel trim available? If so how much for trim and glovebox door shipped to 30606?

Thanks,

Brad

Brad,
Here's the upper door trim I have I'll choose the best set for you if you want them. $30 shipped and $20 shipped for the glovebox door. Half of these costs are shipping. I'll send them separate or the cost will be higher. I'll check both ways before I send me out.

68panelman · 09-27-2014, 02:29 PM

Any luck on the lower vent pin?

**Cash3481** · 09-27-2014, 02:52 PM

Quote:

Originally Posted by 68panelman

Any luck on the lower vent pin?

Those pins are welded on if it's the one I think it is. I'll send you this whole piece for shipping and a few bucks. If you need the spring... Just cover the bubble envelope. Let me know! Sorry for missing you and getting the pic.

68panelman · 09-27-2014, 04:35 PM

No problem, Just looked and the lower pin has no spring, If the pin comes out, Great, if not I'll take the whole thing.

**IronCanine** · 09-29-2014, 12:30 PM

As long as the glovebox door has no dings. I'm down for it and the best two chrome strips you have.

PM your payment info.

Thanks,

Brad

**Cash3481** · 09-29-2014, 01:52 PM

Quote:

Originally Posted by 68panelman

No problem, Just looked and the lower pin has no spring, If the pin comes out, Great, if not I'll take the whole thing.

$10 Shipped sound good?

Quote:

Originally Posted by IronCanine

As long as the glovebox door has no dings. I'm down for it and the best two chrome strips you have.
PM your payment info.
Thanks,
Brad

PM with paypal inbound! Do you need this specific GBD or any to use with a good face. I haveabout 10 different ones. your choice, just let me know in the PM.

**IronCanine** · 09-29-2014, 03:48 PM

Pay Pal sent.

68panelman · 09-29-2014, 04:12 PM

Sure, I'll take it.

Jake1971 · 10-07-2014, 06:47 PM

Quote:

Originally Posted by Jake1971

How does $60.00 total including shipping for the armrests and push guard sound? The push guard looks like it can be disassembled for a smaller package to ship.

Quote:

Originally Posted by Cash3481

I'll get it off and see if the bolts want to come loose, if shipping is less than $30 I'll make that deal. It takes a lot of time to get the bolts off... Fire up the hot wrench!

Hey Mike, any luck with the push bar?

**KyleSeal** · 10-07-2014, 07:18 PM

Hows the gauge cluster? And which gauges does it have?

**Cash3481** · 10-07-2014, 10:48 PM

Quote:

Originally Posted by Jake1971

Hey Mike, any luck with the push bar?

None yet, I'll have it disassembled this weekend or I will just pass on the sale. It is removed but does not want to be loosened. I don't want to tear it up pulling it apart.

Quote:

Originally Posted by KyleSeal

Hows the gauge cluster? And which gauges does it have?

I sold 13 clusters to a board member. If you need a cluster with gauges I can post a picture of a good condition cluster if you want me to?

bbcjake95 · 10-08-2014, 12:40 AM

So how much would a cab stripped of interior cost me? The windshield frame on mine is fubar lol.

bbcjake95 · 10-08-2014, 12:47 AM

All id need is the cab with doors and the cab support brackets.

**Cash3481** · 10-08-2014, 07:32 AM

Quote:

Originally Posted by bbcjake95

So how much would a cab stripped of interior cost me? The windshield frame on mine is fubar lol.

Quote:

Originally Posted by bbcjake95

All id need is the cab with doors and the cab support brackets.

I have several cabs. I also have a roof only if you need just the sides and top.
Pm me an email and I can send you some pics after work today.

sstaten69 · 10-08-2014, 10:23 AM

Hello my son is looking for a drivers side bedside, well we only need from the tail light to maybe the side marker. his is rusted around the tail light and the corner so just need that part to fix his up. if you have a bed that you could cut this off of. thanks for the time Steve.

**Cash3481** · 10-08-2014, 10:56 AM

Quote:

Originally Posted by sstaten69

Hello my son is looking for a drivers side bedside, well we only need from the tail light to maybe the side marker. his is rusted around the tail light and the corner so just need that part to fix his up. if you have a bed that you could cut this off of. thanks for the time Steve.

I assume its not a 67 bed correct?
Ill seewhat I can find tonight after work!

sstaten69 · 10-08-2014, 11:29 AM

Quote:

Originally Posted by Cash3481

I assume its not a 67 bed correct?
Ill seewhat I can find tonight after work!

His is a 68 but 67 will work It is rusted in the tail light bucket and just around the corner about 1 1/2 inches towards the marker. Thanks Steve.

**Cash3481** · 10-08-2014, 12:32 PM

Quote:

Originally Posted by sstaten69

His is a 68 but 67 will work It is rusted in the tail light bucket and just around the corner about 1 1/2 inches towards the marker. Thanks Steve.

Ill load a pic if I have one to cut after work.

68panelman · 10-08-2014, 01:00 PM

Can you PM me your info for the cowl vent.

68panelman · 10-08-2014, 03:02 PM

Payment sent. Thank you.

**88JRFAN** · 10-09-2014, 10:50 PM

Do you have any of the door lock rod's that you would be willing to sell? Need them for both door's. Thanks!

09-26-2014, 03:47 PM	#126
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,149	Re: Parting a 70 custom 10 Mike, my stuff arrived today and thank you for the fast service. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

09-27-2014, 12:23 AM	#127
freezmcnally Registered User Join Date: Jan 2014 Location: arkansas Posts: 186	Re: Parting a 70 custom 10 I'd like the radio if it works pm me __________________ Every new beginning comes from some other beginnings end

09-27-2014, 01:42 PM	#129
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,798	Re: Parting a 70 custom 10 Upper door panel trim available? If so how much for trim and glovebox door shipped to 30606? Thanks, Brad

09-27-2014, 02:29 PM	#131
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,462	Re: Parting a 70 custom 10 Any luck on the lower vent pin?

09-27-2014, 04:35 PM	#133
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,462	Re: Parting a 70 custom 10 No problem, Just looked and the lower pin has no spring, If the pin comes out, Great, if not I'll take the whole thing.

09-29-2014, 12:30 PM	#134
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,798	Re: Parting a 70 custom 10 As long as the glovebox door has no dings. I'm down for it and the best two chrome strips you have. PM your payment info. Thanks, Brad

09-29-2014, 03:48 PM	#136
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,798	Re: Parting a 70 custom 10 Pay Pal sent.

09-29-2014, 04:12 PM	#137
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,462	Re: Parting a 70 custom 10 Sure, I'll take it.

10-07-2014, 07:18 PM	#139
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 893	Re: Parting a 70 custom 10 Hows the gauge cluster? And which gauges does it have? __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809

10-08-2014, 12:40 AM	#141
bbcjake95 Registered User Join Date: Aug 2013 Location: Lubbock, TX Posts: 16	Re: Parting a 70 custom 10 So how much would a cab stripped of interior cost me? The windshield frame on mine is fubar lol.

10-08-2014, 12:47 AM	#142
bbcjake95 Registered User Join Date: Aug 2013 Location: Lubbock, TX Posts: 16	Re: Parting a 70 custom 10 All id need is the cab with doors and the cab support brackets.

10-08-2014, 10:23 AM	#144
sstaten69 Registered User Join Date: Feb 2011 Location: Irondale, Missouri. Posts: 196	Re: Parting a 70 custom 10 Hello my son is looking for a drivers side bedside, well we only need from the tail light to maybe the side marker. his is rusted around the tail light and the corner so just need that part to fix his up. if you have a bed that you could cut this off of. thanks for the time Steve. __________________ http://67-72chevytrucks.com/vboard/s...0&referrerid=0

10-08-2014, 01:00 PM	#148
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,462	Re: Parting a 70 custom 10 Can you PM me your info for the cowl vent.

10-08-2014, 03:02 PM	#149
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,462	Re: Parting a 70 custom 10 Payment sent. Thank you.

10-09-2014, 10:50 PM	#150
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Parting a 70 custom 10 Do you have any of the door lock rod's that you would be willing to sell? Need them for both door's. Thanks! __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.