MD 72 burb parts - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

notchbackgta · 11-06-2016, 09:28 PM

Quote:

Originally Posted by richard2717

here is the last pc I pulled off before the scrap man pulled away. This was under the plywood floor for the rear (3rd) seat. The 2nd row bracket was not worth pulling out. mainly surface rust & I will run a tap thru the threads in the morning to make sure all is well there.

I will give 1968 K20 1st refusal since i am not sure if this is what he was asking for in an earlier post or if it was the brackets attached to the seats.

This pc is $50 shipped due to the weight and length

.

Is this still available?

**richard2717** · 11-06-2016, 09:39 PM

Quote:

Originally Posted by notchbackgta

Is this still available?

Yes sir it is

notchbackgta · 11-06-2016, 09:41 PM

That is under the wood floor ~above the gas tank, right?

**richard2717** · 11-06-2016, 10:47 PM

Quote:

Originally Posted by notchbackgta

That is under the wood floor ~above the gas tank, right?

Yes. It was attached to the underside of the plywood floor in the 3rd seat position.

notchbackgta · 11-07-2016, 10:51 AM

Cool, I'll take it you're taking paypal

**richard2717** · 11-07-2016, 11:13 AM

Quote:

Originally Posted by notchbackgta

Cool, I'll take it you're taking paypal

Pm sent

irving · 11-07-2016, 08:37 PM

Quote:

Originally Posted by richard2717

Here is a closeup of the struts for Irving. The one still has a tab in the lock/ unlock cut out, the other does not. It did not appear to have any affect on the function of the struts. They will both need some white lube to free them up as they are both stiff.

Pmt sent. Thanks!

**richard2717** · 11-07-2016, 09:14 PM

Quote:

Originally Posted by irving

Pmt sent. Thanks!

Got it. Will send out tomorrow and pm tracking.
Thanks
Richard

**richard2717** · 11-07-2016, 09:17 PM

Quote:

Originally Posted by notchbackgta

Cool, I'll take it you're taking paypal

Got your payment. Will send out tomorrow and pm tracking.
FYI I ran a tap thru all four welded nuts so the threads are good and clean.

Thanks
Richard

notchbackgta · 11-07-2016, 10:10 PM

Quote:

Originally Posted by richard2717

Got your payment. Will send out tomorrow and pm tracking.
FYI I ran a tap thru all four welded nuts so the threads are good and clean.

Thanks
Richard

Sweet, thanks. I will probably blast it and epoxy prime it anyway.

How is it held in? I haven't looked at mine much, I just know some PO put a ragged hole in it to get to the sender through the floor

**richard2717** · 11-07-2016, 11:49 PM

Quote:

Originally Posted by notchbackgta

Sweet, thanks. I will probably blast it and epoxy prime it anyway.

How is it held in? I haven't looked at mine much, I just know some PO put a ragged hole in it to get to the sender through the floor

It just had two 1/4" carriage bolts thru it into the plywood

**richard2717** · 11-08-2016, 11:49 AM

PM's sent with tracking to notchback and Irving

**richard2717** · 11-17-2016, 06:37 PM

Ttt still have a few things left

Jestradaiam620 · 12-05-2016, 05:29 PM

How much for the doors?

**richard2717** · 12-05-2016, 06:17 PM

Quote:

Originally Posted by Jestradaiam620

How much for the doors?

Only door I have is the 3rd door and it has some filler in the bottom. $150 plus shipping. Shipping to CA would probably be in the area of $250 extra. Thats about what I paid to get a pair of doors from Riverside CA. There are a few guys in CA here on the site that would probably be a better bet for you

Richard

Jestradaiam620 · 12-05-2016, 09:52 PM

Richard,
In what kind of shape are the front door window frames? Have doors need to convert them into square instead of pick up truck rounded frames

**richard2717** · 12-05-2016, 11:46 PM

Quote:

Originally Posted by Jestradaiam620

Richard,
In what kind of shape are the front door window frames? Have doors need to convert them into square instead of pick up truck rounded frames

Both front doors have already been scrapped. I took off all usable parts but the shells were complete junk. The drivers door frame was badly damaged by forklift and the passenger side was dented up so they were no saved. Sorry

Heliarcn · 12-12-2016, 11:54 AM

Richard,

I need a couple of short sections of the front frame rails if your willing to cut. Please let me know. Thanks.

Bret

**richard2717** · 12-12-2016, 12:06 PM

Quote:

Originally Posted by Heliarcn

Richard,

I need a couple of short sections of the front frame rails if your willing to cut. Please let me know. Thanks.

Bret

Bret
I already junked all of that and it was in bad shape. I have some other frame cuts here but not sure what you are needing. Post a pic of what you need and I can let you know if I have it.

Richard

Heliarcn · 12-12-2016, 12:41 PM

Quote:

Originally Posted by richard2717

Bret
I already junked all of that and it was in bad shape. I have some other frame cuts here but not sure what you are needing. Post a pic of what you need and I can let you know if I have it.

Richard

I'm looking for a 12" section of both frame rails that starts 18" from the front. So, if you measure back 18" from the front of the frame, that would be the starting point and I need the next 12" of the frame. Both sides.

**richard2717** · 12-12-2016, 01:09 PM

It has been raining here all morning. If I catch a break in the rain I will go out and check. Is there a difference in 2wd vs 4wd frames, or are they the same?

thanks
Richard

Heliarcn · 12-12-2016, 07:08 PM

Quote:

Originally Posted by richard2717

It has been raining here all morning. If I catch a break in the rain I will go out and check. Is there a difference in 2wd vs 4wd frames, or are they the same?

thanks
Richard

I've never looked at the 4wd so I'm not sure. Can you take a picture and I'll compare?

Thanks

**richard2717** · 12-13-2016, 05:38 PM

Bret
Here is the picture of the Pass side rail. I forgot I cut and shipped DS last week to another member. I should be getting 2 more burbs in on Saturday if I can swing the deal. If so I will be parting them pretty quickly

.

Heliarcn · 12-13-2016, 06:36 PM

That passenger side rail looks the same as mine. I think it'll work.

Travisarmenta · 12-14-2016, 11:32 AM

3rd door panel any good?

if not any idea where i can get a green one?

11-06-2016, 09:41 PM	#128
notchbackgta Registered User Join Date: Dec 2011 Location: Earth, NJ Posts: 479	Re: 72 burb parts That is under the wood floor ~above the gas tank, right?

11-07-2016, 10:51 AM	#130
notchbackgta Registered User Join Date: Dec 2011 Location: Earth, NJ Posts: 479	Re: 72 burb parts Cool, I'll take it you're taking paypal

11-08-2016, 11:49 AM	#137
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: 72 burb parts PM's sent with tracking to notchback and Irving __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

11-17-2016, 06:37 PM	#138
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: 72 burb parts Ttt still have a few things left __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-05-2016, 05:29 PM	#139
Jestradaiam620 Registered User Join Date: Dec 2016 Location: Mission hills, CA Posts: 6	Re: 72 burb parts How much for the doors?

12-05-2016, 09:52 PM	#141
Jestradaiam620 Registered User Join Date: Dec 2016 Location: Mission hills, CA Posts: 6	Re: 72 burb parts Richard, In what kind of shape are the front door window frames? Have doors need to convert them into square instead of pick up truck rounded frames

12-12-2016, 11:54 AM	#143
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: 72 burb parts Richard, I need a couple of short sections of the front frame rails if your willing to cut. Please let me know. Thanks. Bret __________________ Bret 1972 Chevy Suburban 1976 Blazer

12-12-2016, 01:09 PM	#146
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: 72 burb parts It has been raining here all morning. If I catch a break in the rain I will go out and check. Is there a difference in 2wd vs 4wd frames, or are they the same? thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-13-2016, 05:38 PM	#148
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,130	Re: 72 burb parts Bret Here is the picture of the Pass side rail. I forgot I cut and shipped DS last week to another member. I should be getting 2 more burbs in on Saturday if I can swing the deal. If so I will be parting them pretty quickly . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-13-2016, 06:36 PM	#149
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: 72 burb parts That passenger side rail looks the same as mine. I think it'll work. __________________ Bret 1972 Chevy Suburban 1976 Blazer

12-14-2016, 11:32 AM	#150
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: 72 burb parts 3rd door panel any good? if not any idea where i can get a green one?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.