1969 SuperBurb build-up (Bagged and Blown!) - Page 63 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 10-28-2016, 11:32 AM

Bet that5 felt good after all theses years backing it out on its own power. The ole olive burb sure has grown up!

**Hart_Rod** · 10-28-2016, 01:12 PM

Quote:

Originally Posted by Palf70Step

Bet that5 felt good after all theses years backing it out on its own power. The ole olive burb sure has grown up!

It did Bill! It was a long time coming...

. Next year might finally be here....

.

laidoutchevitos · 10-29-2016, 02:25 PM

Dang. That sounds NICE. 👍 and looks sharp

3drburb · 11-02-2016, 12:21 PM

Congrats on getting it running and sunbathing. Man that is one sweet ride!

**Hart_Rod** · 11-02-2016, 12:51 PM

Quote:

Originally Posted by laidoutchevitos

Dang. That sounds NICE. �� and looks sharp

Quote:

Originally Posted by 3drburb

Congrats on getting it running and sunbathing. Man that is one sweet ride!

Thanks guys! Not much progress on the Suburban this week as I've been trying to get my shop finished up. Insulation and sheet rocking should by done by the end of the week, finish the trim this weekend, then paint everything this Monday....

.

**Advanced Design** · 11-02-2016, 01:47 PM

That looks good. Did you do the sheet rock and mudding?

**Hart_Rod** · 11-02-2016, 01:51 PM

Quote:

Originally Posted by Advanced Design

That looks good. Did you do the sheet rock and mudding?

Nope, I left that to the professionals....

.

**Dieselwrencher** · 11-02-2016, 04:40 PM

Quote:

Originally Posted by Hart_Rod

Nope, I left that to the professionals....

.

I don't blame you one bit! They can do it so fast!

04ls1gto · 11-02-2016, 07:57 PM

Garage looks good

**Hart_Rod** · 11-03-2016, 12:17 PM

Quote:

Originally Posted by Dieselwrencher

I don't blame you one bit! They can do it so fast!

Quote:

Originally Posted by 04ls1gto

Garage looks good

Thanks! I'm excited to get it finished and start moving in again,

.

**Hart_Rod** · 11-14-2016, 10:40 AM

I'm still working on getting my shop put back together. All the painting is done but I need to reinstall my lights and assorted components. I had Friday off (God Bless all of our Military and Veterans!) so I took the suburban and had the exhaust installed. It was a tight fit, but it came out well and sounds good. Pics and video!

https://www.instagram.com/p/BMt2yalBmzk/

knomadd · 11-14-2016, 11:41 AM

Looks and sounds good!! I see you have a cruise control on your turn signal switch. Did you get it hooked up and working, or have you not tested it yet (I assume not)? Sorry if I missed it, but is it the factory GM cruise through your ECM or are you using an aftermarket kit like Dakota Digital?

**Hart_Rod** · 11-14-2016, 12:22 PM

Quote:

Originally Posted by knomadd

Looks and sounds good!! I see you have a cruise control on your turn signal switch. Did you get it hooked up and working, or have you not tested it yet (I assume not)? Sorry if I missed it, but is it the factory GM cruise through your ECM or are you using an aftermarket kit like Dakota Digital?

Thanks! My motor is a GEN III, so I was able to wire it into the tach module using a Dakota Digital HND-3 CC handle. Isn't your a Gen IV? If so, you will have to go with an aftermarket setup.

knomadd · 11-14-2016, 05:28 PM

Quote:

Originally Posted by Hart_Rod

Thanks! My motor is a GEN III, so I was able to wire it into the tach module using a Dakota Digital HND-3 CC handle. Isn't your a Gen IV? If so, you will have to go with an aftermarket setup.

You are correct, it is a gen IV. Too bad I'll have to go aftermarket, but at least I can wait on that. Thanks for the heads up.

**Palf70Step** · 11-14-2016, 06:51 PM

Burb looks and sounds good rob. What mufflers you end up with on it?

**Hart_Rod** · 11-15-2016, 12:23 PM

Quote:

Originally Posted by knomadd

You are correct, it is a gen IV. Too bad I'll have to go aftermarket, but at least I can wait on that. Thanks for the heads up.

NP

Quote:

Originally Posted by Palf70Step

Burb looks and sounds good rob. What mufflers you end up with on it?

Doug Thorley Tri-Y headers, Magnaflows, 2 1/2" aluminized pipe all the way back, with an H-Pipe.

**Dieselwrencher** · 11-15-2016, 10:08 PM

The exhaust looks great, and it sounds great too!

**Hart_Rod** · 11-17-2016, 11:03 AM

Quote:

Originally Posted by Dieselwrencher

The exhaust looks great, and it sounds great too!

Thanks!

**HO455** · 11-20-2016, 12:24 AM

Quote:

Originally Posted by Hart_Rod

NP

Doug Thorley Tri-Y headers, Magnaflows, 2 1/2" aluminized pipe all the way back, with an H-Pipe.

If is not too much trouble, which Magnaflows did you use?
Thanks VC

**Hart_Rod** · 11-22-2016, 09:05 AM

Quote:

Originally Posted by HO455

If is not too much trouble, which Magnaflows did you use?
Thanks VC

I believe they were these:

https://www.summitracing.com/parts/mpe-11226/overview/

Finally finished all the painting. Just need to hang some blinds and finish the bathroom. Moved the Burb back in to get a feel of where I want to place all of my tools/toolboxes.

**Palf70Step** · 11-22-2016, 05:48 PM

**Dieselwrencher** · 11-22-2016, 07:14 PM

Very nice! I wish I would have painted all my dry wall before I piled all the stuff against the walls in my garage!

**Hart_Rod** · 11-23-2016, 08:49 AM

Quote:

Originally Posted by Palf70Step

Thanks Bill!

Quote:

Originally Posted by Dieselwrencher

Very nice! I wish I would have painted all my dry wall before I piled all the stuff against the walls in my garage!

Thanks! I don't want to have to move stuff again, so I'm trying to get everything done before I start filling it back up,

.

**Hart_Rod** · 11-27-2016, 09:52 AM

Not much progress other than moving stuff back into the shop. I did get my cruise control working and some minor tuning done, so that's a win

.

Kendski · 12-01-2016, 11:03 PM

Awesome build thread. Beautiful truck.

10-28-2016, 11:32 AM	#1551
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,221	Re: 1969 SuperBurb build-up (Bagged and Blown!) Bet that5 felt good after all theses years backing it out on its own power. The ole olive burb sure has grown up! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-29-2016, 02:25 PM	#1553
laidoutchevitos Registered User Join Date: Dec 2011 Location: Hamilton City, CA. Posts: 11	Re: 1969 SuperBurb build-up (Bagged and Blown!) Dang. That sounds NICE. 👍 and looks sharp

11-02-2016, 12:21 PM	#1554
3drburb Registered User Join Date: Jul 2011 Location: Kent, WA. Posts: 856	Re: 1969 SuperBurb build-up (Bagged and Blown!) Congrats on getting it running and sunbathing. Man that is one sweet ride!

11-02-2016, 01:47 PM	#1556
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: 1969 SuperBurb build-up (Bagged and Blown!) That looks good. Did you do the sheet rock and mudding? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

11-02-2016, 07:57 PM	#1559
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: 1969 SuperBurb build-up (Bagged and Blown!) Garage looks good

11-14-2016, 10:40 AM	#1561
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 SuperBurb build-up (Bagged and Blown!) I'm still working on getting my shop put back together. All the painting is done but I need to reinstall my lights and assorted components. I had Friday off (God Bless all of our Military and Veterans!) so I took the suburban and had the exhaust installed. It was a tight fit, but it came out well and sounds good. Pics and video! https://www.instagram.com/p/BMt2yalBmzk/ Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-14-2016, 11:41 AM	#1562
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looks and sounds good!! I see you have a cruise control on your turn signal switch. Did you get it hooked up and working, or have you not tested it yet (I assume not)? Sorry if I missed it, but is it the factory GM cruise through your ECM or are you using an aftermarket kit like Dakota Digital? __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

11-14-2016, 06:51 PM	#1565
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,221	Re: 1969 SuperBurb build-up (Bagged and Blown!) Burb looks and sounds good rob. What mufflers you end up with on it? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-15-2016, 10:08 PM	#1567
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1969 SuperBurb build-up (Bagged and Blown!) The exhaust looks great, and it sounds great too! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-22-2016, 05:48 PM	#1571
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,221	Re: 1969 SuperBurb build-up (Bagged and Blown!) __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-22-2016, 07:14 PM	#1572
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1969 SuperBurb build-up (Bagged and Blown!) Very nice! I wish I would have painted all my dry wall before I piled all the stuff against the walls in my garage! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-27-2016, 09:52 AM	#1574
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 SuperBurb build-up (Bagged and Blown!) Not much progress other than moving stuff back into the shop. I did get my cruise control working and some minor tuning done, so that's a win . __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-01-2016, 11:03 PM	#1575
Kendski Registered User Join Date: Dec 2016 Location: Port St. Lucie Posts: 9	Re: 1969 SuperBurb build-up (Bagged and Blown!) Awesome build thread. Beautiful truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.