PO has me PO'd - Page 63 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 12-08-2010, 11:20 PM

nice build i went through it a little while ago and i thought i posted but guess i didnt like how you are putting trim on the blazer that was one of gms mistakes not making a 67 68 blazer

**jaros44sr** · 12-09-2010, 12:21 AM

Quote:

Originally Posted by 67chevy1series

nice build i went through it a little while ago and i thought i posted but guess i didnt like how you are putting trim on the blazer that was one of gms mistakes not making a 67 68 blazer

thanks for lookin, been a really fun build, but I have struggled to keep on task at times

The problem with the '68 trim is the radius of the rear wheel well is not the same as the trucks, so I have to tweak it a little. Not sure how that will turn out...we shall see

Always liked the '67 '68 front ends, just simple style with a bit of bling

67chevy1series · 12-09-2010, 12:56 AM

Quote:

Originally Posted by jaros44sr

thanks for lookin, been a really fun build, but I have struggled to keep on task at times

The problem with the '68 trim is the radius of the rear wheel well is not the same as the trucks, so I have to tweak it a little. Not sure how that will turn out...we shall see

Always liked the '67 '68 front ends, just simple style with a bit of bling

exactly ya i hope the trim turns out okay i would love to see a 67 68 trimmed out blazer that would look awsome

**jaros44sr** · 12-09-2010, 01:49 AM

Quote:

Originally Posted by 67chevy1series

exactly ya i hope the trim turns out okay i would love to see a 67 68 trimmed out blazer that would look awsome

I hope so also, as that edge will be my paint color divider. Something like the 50th anniversary, only green instead of the gold

67chevy1series · 12-09-2010, 11:30 PM

oh that will be cool

swamp rat · 12-10-2010, 11:52 PM

I may have missed it but who makes the dual handle shifter kit? Thanks!

**jaros44sr** · 12-11-2010, 12:58 AM

Quote:

Originally Posted by swamp rat

I may have missed it but who makes the dual handle shifter kit? Thanks!

Off Road Design.com good stuff, but I have to try and bend the shifters at a 45 degree angle

swamp rat · 12-11-2010, 01:33 AM

Thanks for the link and the heads up!

**jaros44sr** · 12-12-2010, 08:12 PM

for the longest time I didn't know why I was leaking tranny fluid here, I was playing with my 'K' case TH350 and noticed these brass fittings. Seems like the PO didn't want to put back the strait threaded adapters, and just threaded the inverted flare fittings into the trans. Still have to get some crush washers, but for now just used some thread sealer. The adapters were tight going in, so I hope I didn't put any threads down into the tranny

oh BTW, problem with the shifters on the twin stick, have to cut and bend or cut and weld or machine a block and bore and weld...

67chevy1series · 12-12-2010, 08:50 PM

well what ever it is you will make it come out right

Big J · 12-14-2010, 01:20 PM

Quote:

Originally Posted by jaros44sr

oh BTW, problem with the shifters on the twin stick, have to cut and bend or cut and weld or machine a block and bore and weld...

I have a hydraulic tube bender that would probably work if you wanna come over and use it

**jaros44sr** · 12-14-2010, 04:49 PM

Ill be down in the spring to take you up on the offer
Posted via Mobile Device

Big J · 12-15-2010, 12:04 AM

Quote:

Originally Posted by jaros44sr

Ill be down in the spring to take you up on the offer
Posted via Mobile Device

OUTSTANDING! Maybe mine will be done and we can go for a drive.

CORSAIR · 12-15-2010, 11:42 PM

You are one determined guy, We never see rust that bad out here. It looks like it coming together nice? How you digging those grinding boggers at the end of the day? HA HA (Been there on a 27 ford rodster I just finished)
Good luck and God speed

**jaros44sr** · 12-16-2010, 06:43 PM

Quote:

Originally Posted by CORSAIR

You are one determined guy, We never see rust that bad out here. It looks like it coming together nice? How you digging those grinding boggers at the end of the day? HA HA (Been there on a 27 ford rodster I just finished)
Good luck and God speed

It's not hard to be determined when your workshop is attached to your house and its 70 degrees in there at all times

Hope I entertained you after all the reading ya did. We use salt on our roads in the winter and it just eats the trucks up. Thank goodness for patch panels

I hate grinding!!!!

**jaros44sr** · 01-30-2011, 06:33 PM

pics for AJ...glad to see you're still moving forward

AJs72K5 · 01-30-2011, 07:00 PM

Perfect! Thanks Jim!

67chevy1series · 01-31-2011, 03:03 AM

we need progress

**jaros44sr** · 01-31-2011, 04:34 PM

Quote:

Originally Posted by 67chevy1series

we need progress

Ill see what I can round up, rite now its wiring up the engine compartment, plus putting my tilt back together and installing it in the truck...amazing how many parts are in it

also ordered the new Accel corrected HEI distributer cap, end of this week for delivery

Tynee · 02-02-2011, 10:48 PM

Quote:

Originally Posted by jaros44sr

Ill be down in the spring to take you up on the offer
Posted via Mobile Device

Stop at my place on the way through. I'll ride with you.

Thought about you today while i was spending what seemed like an eternity in the Philly airport waiting on a connecting flight.

Chevyman63 · 02-03-2011, 12:02 AM

Quote:

Originally Posted by jaros44sr

Ill see what I can round up, rite now its wiring up the engine compartment, plus putting my tilt back together and installing it in the truck...amazing how many parts are in it

also ordered the new Accel corrected HEI distributer cap, end of this week for delivery

I'm looking forward to riding in that thing when it's done!!

**jaros44sr** · 02-03-2011, 01:01 PM

Quote:

Originally Posted by Chevyman63

I'm looking forward to riding in that thing when it's done!!

Quote:

Originally Posted by Tynee

Stop at my place on the way through. I'll ride with you.

Thought about you today while i was spending what seemed like an eternity in the Philly airport waiting on a connecting flight.

Sounds like a plan Tim

Tynee, should of called me, we could've killed some time together
Posted via Mobile Device

**jaros44sr** · 02-08-2011, 08:30 PM

AJ, to answer your PM, that step in the cupholder is 1/8" thick at the smallest demension

trying to wire up my electric water pump, once I buy the GOOD Vortec intake manifold gaskets, I may be able to run some water thru my cooling system

**jaros44sr** · 02-11-2011, 08:36 PM

finally foumd a place to mount the solenoids for my winch, not to much modification to the mount

picked up the new corrected dist. cap from Accel, now all my spark plug wires from the left bank and right bank will stay to each side of the engine. Also, scored a NOS interior light (it's for a pickup, but should fit the 1/2 top), and my brackets for mounting my AM radio...thanks board members

67chevy1series · 02-12-2011, 04:32 AM

wow great stuff! i love nos but dont have one nos thing on my truck!haha

12-08-2010, 11:20 PM	#1551
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: PO has me PO'd nice build i went through it a little while ago and i thought i posted but guess i didnt like how you are putting trim on the blazer that was one of gms mistakes not making a 67 68 blazer

12-09-2010, 11:30 PM	#1555
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: PO has me PO'd oh that will be cool

12-10-2010, 11:52 PM	#1556
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: PO has me PO'd I may have missed it but who makes the dual handle shifter kit? Thanks! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

12-11-2010, 01:33 AM	#1558
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: PO has me PO'd Thanks for the link and the heads up! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

12-12-2010, 08:12 PM	#1559
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: PO has me PO'd for the longest time I didn't know why I was leaking tranny fluid here, I was playing with my 'K' case TH350 and noticed these brass fittings. Seems like the PO didn't want to put back the strait threaded adapters, and just threaded the inverted flare fittings into the trans. Still have to get some crush washers, but for now just used some thread sealer. The adapters were tight going in, so I hope I didn't put any threads down into the tranny oh BTW, problem with the shifters on the twin stick, have to cut and bend or cut and weld or machine a block and bore and weld... __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 12-12-2010 at 08:25 PM.

12-12-2010, 08:50 PM	#1560
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: PO has me PO'd well what ever it is you will make it come out right

12-14-2010, 04:49 PM	#1562
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: PO has me PO'd Ill be down in the spring to take you up on the offer Posted via Mobile Device __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-15-2010, 11:42 PM	#1564
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: PO has me PO'd You are one determined guy, We never see rust that bad out here. It looks like it coming together nice? How you digging those grinding boggers at the end of the day? HA HA (Been there on a 27 ford rodster I just finished) Good luck and God speed __________________ "The Can't Family Lives Across The Street"

01-30-2011, 06:33 PM	#1566
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: PO has me PO'd pics for AJ...glad to see you're still moving forward __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 01-31-2011 at 11:13 AM.

01-30-2011, 07:00 PM	#1567
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: PO has me PO'd Perfect! Thanks Jim! __________________ - AJ Gray Matter Build - 1972 K5 with some stuff

01-31-2011, 03:03 AM	#1568
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: PO has me PO'd we need progress

02-08-2011, 08:30 PM	#1573
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: PO has me PO'd AJ, to answer your PM, that step in the cupholder is 1/8" thick at the smallest demension trying to wire up my electric water pump, once I buy the GOOD Vortec intake manifold gaskets, I may be able to run some water thru my cooling system __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 02-08-2011 at 08:32 PM.

02-11-2011, 08:36 PM	#1574
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: PO has me PO'd finally foumd a place to mount the solenoids for my winch, not to much modification to the mount picked up the new corrected dist. cap from Accel, now all my spark plug wires from the left bank and right bank will stay to each side of the engine. Also, scored a NOS interior light (it's for a pickup, but should fit the 1/2 top), and my brackets for mounting my AM radio...thanks board members __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 02-12-2011 at 09:09 AM.

02-12-2011, 04:32 AM	#1575
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: PO has me PO'd wow great stuff! i love nos but dont have one nos thing on my truck!haha



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.