post your 67-72 4x4 - Page 65 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Killer Bee · 04-15-2020, 01:48 AM

don't think the white one made it into this thread yet..

gmc is rusted out with decent paint, chevy is rock solid with skin cancer..

drove em both around after getting kicked out of back yard for landscaping

inseparable, like brothers

finally after dump truck and rolloffs were gone, back to the street

jjzepplin · 04-15-2020, 08:42 AM

Quote:

Originally Posted by outfield

We had some March snow fall in Portland on Saturday, so I headed for the hills in Sunday. This is my way of keeping to the social distancing rule!

Now that is just fricken awesome!

57taskforce · 04-21-2020, 07:34 PM

Here’s my turd when I bought it... rust, rust, and more rust.

57taskforce · 04-21-2020, 07:41 PM

And here it is now, it may not look like it’s come far, but it’s a night and day difference. Excuse the mess in the shop, I tend to get a little crazy when I’m working on it! 99% rust free. ( about a Nickels worth in the corners of both doors and that’s it. The carpet and interior should start going in over the next few weeks.

**Jeff's bowtie's** · 04-21-2020, 08:28 PM

Looks good Tyler it’s came a long way for sure!

**Jeff's bowtie's** · 04-21-2020, 08:58 PM

Here’s my latest project truck a 72 short bed K/30 stepper. It started life as a 72 longhorn I parted out and it had a nice clean frame that no one wanted. I have a super clean 6’ step side bed that is 100% rust free and dent free so I decided to build a K/30 short stepper. Started out cutting the longhorn frame down 18” under the cab using the step cut method and then converted the front to 4X4 using all the brackets and bushings and engine crossmember of a donor K/5 blazer frame. I put a low mileage single wheel Dana 60 up front and the matching 4:10 14 bolt with locker in the rear. Installed a 4” lift bought 4 16X10” nub style wheels from summit racing and Hercules brand 315/75/16 terra trac tires. It has a low mileage 350 crate motor with a 400 turbo and np 205. Bought a Arizona rust free cab from a guy in Pennsylvania and I had a pair of original 68 rust free fenders and a new aftermarket 68 grill and cowl hood. The doors were off a clean C/60 truck that was barn kept and were also zero rust the only issue was the corners were cut to clear the bigger truck fenders. I replaced those corners with 1/8” plate and they look great. The interior will have newly covered blue buddy buckets and new carpet as well as a tach vac gauge cluster and all new wiring. Here’s some pics so far

**DeadheadNM** · 04-21-2020, 09:07 PM

Great progress!

57taskforce · 04-21-2020, 09:15 PM

Heck yea Jeff that’s another nice one your building. I really gotta get back up there sometime soon. I was hoping to come back this summer but with all the covid 19 stuff going on it’s not looking good. Keep us updated on it!

**Jeff's bowtie's** · 04-21-2020, 09:58 PM

Quote:

Originally Posted by 57taskforce

Heck yea Jeff that’s another nice one your building. I really gotta get back up there sometime soon. I was hoping to come back this summer but with all the covid 19 stuff going on it’s not looking good. Keep us updated on it!

Thanks and stay safe

**allchevy58** · 04-21-2020, 10:57 PM

Name: IMG_1110.JPG
Views: 827
Size: 80.7 KB

Name: IMG_0235.jpg
Views: 838
Size: 49.4 KB

Name: IMG_1936.JPG
Views: 844
Size: 48.9 KB

52napco · 04-22-2020, 07:17 AM

HOLY CRAP...that's a beautiful.GMC

jjzepplin · 04-22-2020, 08:20 AM

Yessir for sure both of those last two trucks are very nice!

jjzepplin · 04-22-2020, 08:22 AM

Quote:

Originally Posted by 57taskforce

And here it is now, it may not look like it’s come far, but it’s a night and day difference. Excuse the mess in the shop, I tend to get a little crazy when I’m working on it! 99% rust free. ( about a Nickels worth in the corners of both doors and that’s it. The carpet and interior should start going in over the next few weeks.

Great job! Thanks for saving another one!

57taskforce · 04-22-2020, 04:07 PM

Quote:

Originally Posted by 52napco

HOLY CRAP...that's a beautiful.GMC

I agree that K2500 is killer! Really nice work.

**allchevy58** · 04-22-2020, 10:48 PM

Quote:

Originally Posted by 52napco

HOLY CRAP...that's a beautiful.GMC

Quote:

Originally Posted by jjzepplin

Yessir for sure both of those last two trucks are very nice!

Quote:

Originally Posted by 57taskforce

I agree that K2500 is killer! Really nice work.

Thank You, I have it stripped down, ready for body work and paint.

**Orange71shorty** · 04-23-2020, 10:15 AM

Name: 5900A528-B4A0-4904-AD52-D1AB7292E37E.jpg
Views: 799
Size: 39.7 KB

**Orange71shorty** · 04-23-2020, 11:55 PM

72 Cheyenne super k10 swb

Killer Bee · 04-24-2020, 12:26 AM

^^^ nice work y'all

**a Good Man** · 05-29-2020, 07:47 PM

Wtb : K2500 gmc 72-69

**IronCanine** · 06-01-2020, 10:51 PM

Took her out to move some oil around and let her stretch her legs. Snapped a few new photos while out.

57taskforce · 06-01-2020, 11:36 PM

Hell yea! Beautiful truck! Wish my short 69 looked that good... or even my K20 for that matter!

**DeadheadNM** · 06-02-2020, 07:43 AM

Looks great!

**Ol Blue K20** · 06-02-2020, 08:30 AM

Love it, what a beauty!

**davischevy** · 06-02-2020, 10:13 AM

Beautiful.

Wide Open · 06-02-2020, 10:40 PM

Very nice.
All stock?
Posted via Mobile Device

04-15-2020, 01:48 AM	#1601
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,809	Re: post your 67-72 4x4 don't think the white one made it into this thread yet.. gmc is rusted out with decent paint, chevy is rock solid with skin cancer.. drove em both around after getting kicked out of back yard for landscaping inseparable, like brothers finally after dump truck and rolloffs were gone, back to the street __________________ *I started out with nothing - and I still have most of it*

04-21-2020, 07:34 PM	#1603
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: post your 67-72 4x4 Here’s my turd when I bought it... rust, rust, and more rust. Attached Images __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s Last edited by 57taskforce; 04-21-2020 at 07:45 PM.

04-21-2020, 07:41 PM	#1604
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: post your 67-72 4x4 And here it is now, it may not look like it’s come far, but it’s a night and day difference. Excuse the mess in the shop, I tend to get a little crazy when I’m working on it! 99% rust free. ( about a Nickels worth in the corners of both doors and that’s it. The carpet and interior should start going in over the next few weeks. Attached Images __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s Last edited by 57taskforce; 04-21-2020 at 07:48 PM.

04-21-2020, 08:28 PM	#1605
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,955	Re: post your 67-72 4x4 Looks good Tyler it’s came a long way for sure!

04-21-2020, 08:58 PM	#1606
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,955	Re: post your 67-72 4x4 Here’s my latest project truck a 72 short bed K/30 stepper. It started life as a 72 longhorn I parted out and it had a nice clean frame that no one wanted. I have a super clean 6’ step side bed that is 100% rust free and dent free so I decided to build a K/30 short stepper. Started out cutting the longhorn frame down 18” under the cab using the step cut method and then converted the front to 4X4 using all the brackets and bushings and engine crossmember of a donor K/5 blazer frame. I put a low mileage single wheel Dana 60 up front and the matching 4:10 14 bolt with locker in the rear. Installed a 4” lift bought 4 16X10” nub style wheels from summit racing and Hercules brand 315/75/16 terra trac tires. It has a low mileage 350 crate motor with a 400 turbo and np 205. Bought a Arizona rust free cab from a guy in Pennsylvania and I had a pair of original 68 rust free fenders and a new aftermarket 68 grill and cowl hood. The doors were off a clean C/60 truck that was barn kept and were also zero rust the only issue was the corners were cut to clear the bigger truck fenders. I replaced those corners with 1/8” plate and they look great. The interior will have newly covered blue buddy buckets and new carpet as well as a tach vac gauge cluster and all new wiring. Here’s some pics so far Attached Images

04-21-2020, 09:07 PM	#1607
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: post your 67-72 4x4 Great progress! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-21-2020, 09:15 PM	#1608
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: post your 67-72 4x4 Heck yea Jeff that’s another nice one your building. I really gotta get back up there sometime soon. I was hoping to come back this summer but with all the covid 19 stuff going on it’s not looking good. Keep us updated on it! __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

04-21-2020, 10:57 PM	#1610
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,440	Re: post your 67-72 4x4 __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

04-22-2020, 07:17 AM	#1611
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: post your 67-72 4x4 HOLY CRAP...that's a beautiful.GMC

04-22-2020, 08:20 AM	#1612
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: post your 67-72 4x4 Yessir for sure both of those last two trucks are very nice! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

04-23-2020, 10:15 AM	#1616
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 619	Re: post your 67-72 4x4

04-23-2020, 11:55 PM	#1617
Orange71shorty Senior Member Join Date: Feb 2009 Location: Helena, Montana Posts: 619	Re: post your 67-72 4x4 72 Cheyenne super k10 swb Attached Images

04-24-2020, 12:26 AM	#1618
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,809	Re: post your 67-72 4x4 ^^^ nice work y'all __________________ *I started out with nothing - and I still have most of it*

05-29-2020, 07:47 PM	#1619
a Good Man Registered User Join Date: Aug 2010 Location: FL Posts: 2,057	Re: post your 67-72 4x4 Wtb : K2500 gmc 72-69 Attached Images __________________ MY Facebook https://www.facebook.com/saad.alhajri.7106 ( saad_alhajri ) on Instagram

06-01-2020, 10:51 PM	#1620
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,753	Re: post your 67-72 4x4 Took her out to move some oil around and let her stretch her legs. Snapped a few new photos while out. Attached Images __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."



Register or Log In To remove these advertisements.

06-01-2020, 11:36 PM	#1621
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: post your 67-72 4x4 Hell yea! Beautiful truck! Wish my short 69 looked that good... or even my K20 for that matter! __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

06-02-2020, 07:43 AM	#1622
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: post your 67-72 4x4 Looks great! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

06-02-2020, 08:30 AM	#1623
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: post your 67-72 4x4 Love it, what a beauty! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

06-02-2020, 10:13 AM	#1624
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: post your 67-72 4x4 Beautiful. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

06-02-2020, 10:40 PM	#1625
Wide Open Registered User Join Date: May 2016 Location: Ohio Posts: 274	Re: post your 67-72 4x4 Very nice. All stock? Posted via Mobile Device

Register or Log In To remove these advertisements.