|
07-20-2006, 12:54 AM
|
#151 |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
Thank's guy's Think what I'm going to do is take the ones I got with me, run over to my supplier after I get to the city and drop off my truck and trailer at the fabricators. Try the Kirkey and the RCI seats, and if I don't use the ones I have bring them home and take them back to where I got them in town.
I'm sure I can't complicate it any more than I have all ready, had my fill of this seat ordeal. 
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 07-20-2006 at 12:55 AM. |
|
|
|
07-20-2006, 08:52 AM
|
#152 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Ran 11.44 @117.69mph
Good luck I hope you find what you want!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
07-23-2006, 12:14 AM
|
#153 |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
And the winner is Kirkey Pro drag seats, truck is there, measurements taken will be done by the end of next week. If I remember I'll get some pics of the pro street 71 Chev short box he's doing for a guy, full cert cage, back half 4-link, front suspension all done up, 3" chop. Motor's going to be set back, fabbed fire wall and floor, all discs fab 9" rear end, he said the back was all done once before and the guy changed his mind and it had to be again. LOL wish I had that budget. It's like Djracers truck taken one more level.
Anybody get some racing in?
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 07-23-2006 at 12:29 AM. |
|
|
|
|
07-23-2006, 01:09 AM
|
#154 |
|
Senior Member
Join Date: Dec 2001
Location: Redding,CA...USA
Posts: 4,736
|
Re: Ran 11.44 @117.69mph
No racing...but I did go visit my truck. Forgot the camera. Should have the primmer shot tomorrow. I ordered the QA1 front shocks..so we will see how they work. It was 117 degrees again today....just too hot to race(non points)
__________________
It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA |
|
|
|
|
07-23-2006, 01:42 AM
|
#155 |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
It was cooking hot up here too.
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs |
|
|
|
|
07-23-2006, 02:29 AM
|
#156 |
|
Senior Member
 
Join Date: Nov 2005
Location: Spokane , Wash.
Posts: 790
|
Re: Ran 11.44 @117.69mph
I went racing tonite , if you can call it that . 104 air temp , 137 track temp according to the hand held temp gage , i was spinning off the line , that hasn't been a problem before , had the tire pressure down to 9lbs , plus the truck wouldn't cool down below 180 deg. The dragster dudes said the air was registering at 6400 ft. Anyway very small turnout , no one else in my bracket , that 68 is so predictable , ran a 66 on a 65 dial in , last week it was running 49 on a 49 dial in . I don't think i'd bother going to the track when it's that hot , i was just curious how it would react .
Later ........................................... 409 
__________________
Can-Am Motorsports 37 Chev Coupe 331 4 speed 5.13 posi . ex-gasser . 64 Biscayne 409 2x4 4 speed 4.11 posi 65 Nova Wagon Drag Car 383 t400 (Dragin-Wagon) 68 c10 cst 396 t400 a/c buckets lwb 4.11 posi (SOLD) |
|
|
|
|
07-23-2006, 11:49 AM
|
#157 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Ran 11.44 @117.69mph
It rained us out here so I took my son to see Cars at the theater! It was pretty good! It was 100 degrees all week supposed to be 88 today!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
07-26-2006, 11:07 PM
|
#158 |
|
Senior Member
Join Date: Mar 2004
Location: Nebraska
Posts: 583
|
Re: Ran 11.44 @117.69mph
here is parts for the toy i picked up at the machine shop today...
its a 383 stroker built for nitrous.. alot i hope.. bottom end starts with a well preped 350 splayed block. top water chacket holes on decks near bore were pluged and drilled.. rock block instaled to the bottom of water jackets... got a cola forged 4340 leightweight crank thats had denser metal added for balancing... coneting the custom ross nitrous pistons is a set of billet oliver 6" rods with the high hp rod bolts... on the upper end has got a custom ground comp roller cam . dur. 298 lift is 680. heads are dart pro 1s with rme cnc port work done on the chamber and ported exhaust.. as you can tell i am runing one of those cheaper huricane power plus manifolds.. just going to try it for now... to top it off is a 825cfm demon carb.. might be a little small but id like to keep the rpms down... anyways the real hard part was talking my wife into letting me drag it into the house so i could keep it clean and away from bodywork on truck in garage lol!!!  oh ya is anboy going to americruise in lincoln ne.. i will see you there i will be riding with my 15 year old in his green gmc.. the one in my picture.. latersss |
|
|
|
|
07-26-2006, 11:24 PM
|
#159 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Ran 11.44 @117.69mph
Looks sweet it should be lots of fun!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
07-26-2006, 11:50 PM
|
#160 |
|
Senior Member
Join Date: Dec 2001
Location: Redding,CA...USA
Posts: 4,736
|
Re: Ran 11.44 @117.69mph
nice.....
__________________
It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA |
|
|
|
|
07-27-2006, 10:37 AM
|
#161 |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
Inside the house, isn't that where your suppose to keep the valuables?
 Looks good!
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs |
|
|
|
|
07-27-2006, 12:47 PM
|
#162 | |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Ran 11.44 @117.69mph
Quote:
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
|
07-27-2006, 01:45 PM
|
#163 | |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
Quote:
On another note, I got charged $70 re-stocking fee on the first crappy seats I ordered in. Even after I asked the little parts geek before I ordered and he said no charge if I had to bring them back, the butt-munch owner took $70!
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs |
|
|
|
|
|
07-27-2006, 05:05 PM
|
#164 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Ran 11.44 @117.69mph
I would have taken it out of his arse!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
07-27-2006, 05:36 PM
|
#165 | |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
Quote:
 I'm trying to forget about it before I go back.Anyway, found a set of belts, maybe things are looking up, then again, talked to roll bar guy today he asked if I could pick it up Sun instead. Inspection guy just got back to him with plan approval for the back bars.
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 07-27-2006 at 08:06 PM. |
|
|
|
|
|
07-27-2006, 08:09 PM
|
#166 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Ran 11.44 @117.69mph
That's not bad they are usually weeks late with my junk!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
07-30-2006, 10:37 PM
|
#167 | |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
Quote:
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 07-30-2006 at 10:37 PM. |
|
|
|
|
|
07-30-2006, 11:24 PM
|
#168 |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
Here are a few pics of another truck the guy's doing.
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs |
|
|
|
|
07-30-2006, 11:25 PM
|
#169 |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
More.
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs |
|
|
|
|
07-30-2006, 11:49 PM
|
#170 |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
Here are a few pics from the past at the local track. I have no details at all on the trucks or even how old the pics are.
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs |
|
|
|
|
07-31-2006, 12:31 PM
|
#171 |
|
Registered User
Join Date: Feb 2001
Location: Wetumpka, Al, U.S.
Posts: 8,892
|
Re: Ran 11.44 @117.69mph
No pics of yours what's up with that?
What's the deal with the 4 bars out the back of the cab? I have never seen that before and you show 2 trucks like that! The first truck you show needs allot of bars to replace the strength taken out with the firewall!
__________________
Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! |
|
|
|
|
07-31-2006, 12:59 PM
|
#172 | |
|
Registered User
Join Date: Jun 2004
Location: Saskatchewan, Canada
Posts: 1,368
|
Re: Ran 11.44 @117.69mph
Quote:
 The first one, Not sure what they are putting in for a firewall I think steel just shaped for the set back motor. Didn't ask about the extra bars, It has serious cage so far, lot's of extra braces inside also. Could it be possible that it's that way to do away with the funny car cage but still tech for 8's? It was 1/2 done then taken to this guy, and now being changed, not sure what stays and goes.One thing that I don't like on mine is my seat sits too far forward now, I have to try and move the pedals forward for more leg room. He made my back hoop a bit different as a trade off. It has 2 down bars from the top that tie to the frame, and to the back bars, with it like this the NHRA inspector allowed the side bars to attach with plates to the floor and not tie into the frame. Also let me keep my slider and make room for the back bars to travel through the corners. But bad side, head rest hits on the bar and has to be moved forward, not good when your 6'1" 250lbs.  My truck is camera shy when it's stripped down I was going to take a few pics on Sunday, but got a little off track and didn't get around to it. I'll for sure post some when I pick it up.
__________________
Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs |
|
|
|
|
|
08-02-2006, 09:50 PM
|
#173 |
|
Senior Member
Join Date: Dec 2001
Location: Redding,CA...USA
Posts: 4,736
|
Re: Ran 11.44 @117.69mph
Heres some pics of the bed mounting and of the new look(click on pic to make bigger)
     
__________________
It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA Last edited by bigjimzlll; 08-02-2006 at 10:27 PM. |
|
|
|
|
08-02-2006, 10:25 PM
|
#174 |
|
Senior Member
Join Date: Nov 2005
Location: Spokane , Wash.
Posts: 790
|
Re: Ran 11.44 @117.69mph
That truck is looking good ( or baad as my kids say ) . Ya gotta luv black . Are you racing this week end ? Has the temp come down much ? It's kinda nice here , mid 80's , should be nice for the big Nitro Bash fri - sun . I'm planning on racing sat nite , try out my new flowmasters .
Later ................................. 409.
__________________
Can-Am Motorsports 37 Chev Coupe 331 4 speed 5.13 posi . ex-gasser . 64 Biscayne 409 2x4 4 speed 4.11 posi 65 Nova Wagon Drag Car 383 t400 (Dragin-Wagon) 68 c10 cst 396 t400 a/c buckets lwb 4.11 posi (SOLD) |
|
|
|
|
08-02-2006, 10:30 PM
|
#175 |
|
Senior Member
Join Date: Dec 2001
Location: Redding,CA...USA
Posts: 4,736
|
Re: Ran 11.44 @117.69mph
No racing this weekend...I am putting the new Qa1 front shocks on, new ATI 8" converter and ultimate playback tach and wheel tubs and bed cover...lol the list goes on and on
__________________
It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
