Bazooka's 63 build thread. - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tiggamonsta · 10-11-2009, 10:03 AM

Isn't Austin closer to you then Dallas?

ruffrida2005 · 10-11-2009, 01:55 PM

Yeah Austin is an hour away, maybe I need to look there. I was actully looking for somewhere in East texas that's where my truck is at. I just would hate to have to carry the tube over 4 hours.

c10Mang · 10-23-2009, 09:01 PM

Wassup?? Any updates.. Can't wait to see this thing..

Bazooka · 10-23-2009, 11:21 PM

Quote:

Originally Posted by c10Mang

Wassup?? Any updates.. Can't wait to see this thing..

Hopefully will have some updates next week on this thing..

Bazooka · 11-05-2009, 05:46 PM

No update pics yet havent had a chance to stop by the shop. I did order my headers today though..

I was looking for a cheaper alternative to the hookers at $400. I ended up ordering these ceramic coated headers. I found them for $180 shipped on evil bay. Some of the guys on here are using these on bagged trucks and think they would fit even better on a truck with a SD crossmember or PB dropmember..

http://cgi.ebay.com/ebaymotors/SBC-C...item5882ecffd1

http://67-72chevytrucks.com/vboard/s...d.php?t=346197

c10Mang · 11-05-2009, 07:46 PM

Humm.. I wonder if I should get some too? These are what I have now.

Bazooka · 11-06-2009, 02:05 AM

Id wait till you get the engine dropped in and see if there is clearance for the steering shaft. My stock ram horn manifolds wouldnt work..

**Captainfab** · 11-06-2009, 02:09 AM

Whoa! you've got a crossram for your truck? I have one I've been wanting to put on something for a long time.

Quote:

Originally Posted by c10Mang

Humm.. I wonder if I should get some too? These are what I have now.

Bazooka · 11-13-2009, 03:07 AM

headers came in. they are very nice for the price. well worth the money... after seeing these I def wouldnt buy the $400 hookers..

engine and trans are out of the truck along with the stock front suspension stuff. Just a bare set of frame rails in the engine compartment.

the suspension and chassis work should be wrapped up real soon. I will be able to bring my truck home.

couldnt get any good pics was to dark in the shop when I stopped by.

will update again soon hopefully..

Bazooka · 11-16-2009, 05:53 PM

Here's some pics of the bare frame rails. There was some hacked spots on the upper frame rails that were fixed. Cant tell they where ever there.. getting closer

Bazooka · 11-17-2009, 04:17 AM

**scotts62** · 11-17-2009, 08:59 AM

Cool! That cross member is going to look good

ruffrida2005 · 11-17-2009, 09:57 PM

You are going to love how the P-47 lays the front out.

creep · 11-17-2009, 10:11 PM

Looks awesome! Now I can't wait to get my P51 setup started.

sams60gmc · 11-18-2009, 03:08 AM

Subscribed

great looking truck and fab work!

Bazooka · 11-21-2009, 10:02 AM

**ChiefRocka** · 11-21-2009, 10:05 AM

NIce man !!!

FRENCHBLUE72 · 11-21-2009, 10:05 AM

Looking good keep up the good work...

**scotts62** · 11-21-2009, 10:09 AM

looking nice!

Bazooka · 11-24-2009, 04:32 AM

A little more progress

Made a new tranny mount

MacAttack · 11-24-2009, 01:52 PM

Oh wow - that is some beautiful looking fab work, and that steering is going to be sick.

Mac.

98L150 · 11-24-2009, 02:16 PM

cant wait to see more on this one

shrunken66stroker · 11-24-2009, 03:51 PM

Clean work. Nice job.

ruffrida2005 · 11-24-2009, 09:02 PM

Nice work on the trans mount. I think I may have to do the same thing. I put my crossmember as low as I could for exhaust to go, but my pinion is off. Anyone had a mount 1 1/2" larger then stock. and do you see a problem with it.

Bazooka · 11-29-2009, 05:24 AM

Forgot to put the dust shields on... They will be put on

10-11-2009, 10:03 AM	#151
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: Bazooka's 63 build thread. Isn't Austin closer to you then Dallas?

10-11-2009, 01:55 PM	#152
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Bazooka's 63 build thread. Yeah Austin is an hour away, maybe I need to look there. I was actully looking for somewhere in East texas that's where my truck is at. I just would hate to have to carry the tube over 4 hours. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-23-2009, 09:01 PM	#153
c10Mang Registered User Join Date: May 2008 Location: Venice, Ca Posts: 322	Re: Bazooka's 63 build thread. Wassup?? Any updates.. Can't wait to see this thing..

11-05-2009, 05:46 PM	#155
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. No update pics yet havent had a chance to stop by the shop. I did order my headers today though.. I was looking for a cheaper alternative to the hookers at $400. I ended up ordering these ceramic coated headers. I found them for $180 shipped on evil bay. Some of the guys on here are using these on bagged trucks and think they would fit even better on a truck with a SD crossmember or PB dropmember.. http://cgi.ebay.com/ebaymotors/SBC-C...item5882ecffd1 http://67-72chevytrucks.com/vboard/s...d.php?t=346197 Last edited by Bazooka; 11-05-2009 at 05:47 PM.

11-05-2009, 07:46 PM	#156
c10Mang Registered User Join Date: May 2008 Location: Venice, Ca Posts: 322	Re: Bazooka's 63 build thread. Humm.. I wonder if I should get some too? These are what I have now. Attached Images

11-06-2009, 02:05 AM	#157
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Id wait till you get the engine dropped in and see if there is clearance for the steering shaft. My stock ram horn manifolds wouldnt work.. Last edited by Bazooka; 11-06-2009 at 02:06 AM.

11-13-2009, 03:07 AM	#159
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. headers came in. they are very nice for the price. well worth the money... after seeing these I def wouldnt buy the $400 hookers.. engine and trans are out of the truck along with the stock front suspension stuff. Just a bare set of frame rails in the engine compartment. the suspension and chassis work should be wrapped up real soon. I will be able to bring my truck home. couldnt get any good pics was to dark in the shop when I stopped by. will update again soon hopefully.. Last edited by Bazooka; 11-13-2009 at 03:12 AM.

11-16-2009, 05:53 PM	#160
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Here's some pics of the bare frame rails. There was some hacked spots on the upper frame rails that were fixed. Cant tell they where ever there.. getting closer

11-17-2009, 04:17 AM	#161
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Last edited by Bazooka; 11-17-2009 at 04:18 AM.

11-17-2009, 08:59 AM	#162
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Bazooka's 63 build thread. Cool! That cross member is going to look good __________________ Scott 93 crew cab build Project 62

11-17-2009, 09:57 PM	#163
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Bazooka's 63 build thread. You are going to love how the P-47 lays the front out. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

11-17-2009, 10:11 PM	#164
creep Registered Loser Join Date: Jun 2009 Location: Elyria, OH Posts: 1,523	Re: Bazooka's 63 build thread. Looks awesome! Now I can't wait to get my P51 setup started. __________________ ((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. SOLD '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver.

11-18-2009, 03:08 AM	#165
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: Bazooka's 63 build thread. Subscribed great looking truck and fab work! __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718 Last edited by sams60gmc; 11-18-2009 at 03:09 AM.

11-21-2009, 10:02 AM	#166
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread.

11-21-2009, 10:05 AM	#167
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Bazooka's 63 build thread. NIce man !!! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

11-21-2009, 10:05 AM	#168
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Bazooka's 63 build thread. Looking good keep up the good work... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-21-2009, 10:09 AM	#169
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: Bazooka's 63 build thread. looking nice! __________________ Scott 93 crew cab build Project 62

11-24-2009, 04:32 AM	#170
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. A little more progress Made a new tranny mount Last edited by Bazooka; 11-24-2009 at 04:34 AM.

11-24-2009, 01:52 PM	#171
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Bazooka's 63 build thread. Oh wow - that is some beautiful looking fab work, and that steering is going to be sick. Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

11-24-2009, 02:16 PM	#172
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Bazooka's 63 build thread. cant wait to see more on this one __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

11-24-2009, 03:51 PM	#173
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: Bazooka's 63 build thread. Clean work. Nice job. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

11-24-2009, 09:02 PM	#174
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Bazooka's 63 build thread. Nice work on the trans mount. I think I may have to do the same thing. I put my crossmember as low as I could for exhaust to go, but my pinion is off. Anyone had a mount 1 1/2" larger then stock. and do you see a problem with it. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

11-29-2009, 05:24 AM	#175
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. Forgot to put the dust shields on... They will be put on Last edited by Bazooka; 11-29-2009 at 05:30 AM.

Register or Log In To remove these advertisements.