OR 1972 C10 Parting - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Krex · 06-03-2015, 11:44 PM

how much for side mirrors and front bumper brackets to 75023

eightbanger · 06-04-2015, 08:54 AM

Hi, I need a DS trailing arm in good condition???

DLTruck1973 · 06-04-2015, 12:36 PM

Quote:

Originally Posted by eightbanger

Hi, I need a DS trailing arm in good condition???

Hello,

I have several here. They are $85.00 each plus shipping and will be rust, rot and damage free.

I would need your complete UK address to get you a shipping quote. You can PM me that if interested.

Thank you,
Thomas

DLTruck1973 · 06-04-2015, 01:43 PM

Quote:

Originally Posted by Krex

how much for side mirrors and front bumper brackets to 75023

The side mirrors are sold pending payment. If no payment by the end of tomorrow, they are up to you. They are $40.00 plus shipping.

The outside bumper brackets are still available at $15.00 each plus $15.00 to ship so $45.00 total.

Let me know and thank you for the interest,
Thomas

DLTruck1973 · 06-04-2015, 01:48 PM

Quote:

Originally Posted by 70RedBlurr

Thomas zip code for shipping is 95023...
the truck I need those parts for is a 70.

Thanks
Steve

Hi Steve,

I can get you everything from a 1970 pick up with a 350 4 speed. $65.00 plus $17.00 to ship. Total is $82.00. I will make sure every nut bolt and clip is included and make sure the parts are clean for you as well.

Let me know,
Thank you,
Thomas

hddeluxe1 · 06-04-2015, 04:02 PM

I wish to purchase both rear upper shock mounts.Let me know how to send payment and include shipping rate to 97868 if you could please.Thanks.

hddeluxe1

bgravesm · 06-04-2015, 04:05 PM

Do you have any gas pedal assemblies for a 71-72? Thanks

70RedBlurr · 06-04-2015, 05:29 PM

Quote:

Originally Posted by DLTruck1973

Hi Steve,

I can get you everything from a 1970 pick up with a 350 4 speed. $65.00 plus $17.00 to ship. Total is $82.00. I will make sure every nut bolt and clip is included and make sure the parts are clean for you as well.

Let me know,
Thank you,
Thomas

Sounds great. PM your billing info for paypal and I will get that sent over to you
Thanks
Steve

rusted72' · 06-17-2015, 06:00 PM

Is the power booster available for a C10?
would need the brackets as well...shipped to 90601

In The Ten Ring · 06-17-2015, 09:39 PM

Do you still have the white door panels?

Krex · 06-18-2015, 01:17 AM

Quote:

Originally Posted by DLTruck1973

The side mirrors are sold pending payment. If no payment by the end of tomorrow, they are up to you. They are $40.00 plus shipping.

The outside bumper brackets are still available at $15.00 each plus $15.00 to ship so $45.00 total.

Let me know and thank you for the interest,
Thomas

Mirrors sold?

Dano4163 · 06-18-2015, 09:22 AM

I am interested in buying all 4 of the leaf spring hangers if they will fit a 1969 Gmc 1/2 ton. Shipped to 43466.

eightbanger · 06-23-2015, 10:43 AM

Trailing arm arrived in the UK and its perfect, very clean. Thanks Thomas.

DLTruck1973 · 07-08-2015, 11:23 AM

ttt

ddiaz90503 · 07-08-2015, 12:48 PM

Is the grill emblem still avail?

DLTruck1973 · 07-09-2015, 12:13 PM

Quote:

Originally Posted by ddiaz90503

Is the grill emblem still avail?

I have this one for $20.00 plus shipping at $7.00 so $27.00 total.

It is not bad with minor pitting on the chrome, good studs with nuts. The center is not that great but is not cracked.

Let me know,

Thank you,
Thomas

rusted72' · 07-09-2015, 02:53 PM

looking for the power booster with all brackets for a C-10 on pic#2.
is it still available?
thanks

DLTruck1973 · 07-09-2015, 03:31 PM

Quote:

Originally Posted by rusted72'

looking for the power booster with all brackets for a C-10 on pic#2.
is it still available?
thanks

The one in the photo is not available but I have one on a 72 C10 "delco moraine" that needs to be pulled. It is $100.00 plus shipping for the booster, the pedal bracket, both support rods, small lines from master to prop valve, prop valve and master.

rusted72' · 07-09-2015, 03:43 PM

sounds good.
can I see some pics before i commit?
total with shipping to 90601
.
thank you

DLTruck1973 · 07-09-2015, 05:19 PM

Quote:

Originally Posted by rusted72'

sounds good.
can I see some pics before i commit?
total with shipping to 90601
.
thank you

Here are photos of the one I have available. Shipping will be $29.42 so the total is $129.42. I will have to pull this. It will be Monday before I can get to it.

Let me know and I will PM you payment information.

Thank you,
Thomas

rusted72' · 07-12-2015, 01:51 PM

PM sent

NovaBrad · 07-12-2015, 05:16 PM

Do you still the engine wire harness and front light wire harness available? If so can you please post a couple pictures. I am interested. Thanks.

buick1 · 07-12-2015, 09:05 PM

Hello
Do you still have left front parking light housing with wiring? I don't need the lense, just the housing and wiring pigtail! How much freight to 55082?
Thanks!
Dan

DLTruck1973 · 07-13-2015, 11:13 AM

Quote:

Originally Posted by NovaBrad

Do you still the engine wire harness and front light wire harness available? If so can you please post a couple pictures. I am interested. Thanks.

I am not sure about the ones from this truck. I believe they were in poor condition. I do have others here that are nicer.

What is your engine trans combo? 350/auto? 6 cyl/4speed?

Let me know what you have and I will look and post photos of what I have.

Thank you,
Thomas

DLTruck1973 · 07-13-2015, 11:15 AM

Quote:

Originally Posted by buick1

Hello
Do you still have left front parking light housing with wiring? I don't need the lense, just the housing and wiring pigtail! How much freight to 55082?
Thanks!
Dan

Hi Dan,

I have plenty of the housings with nice pigtails. $28.00 shipped to your door.

Let me know and I will send you a PM with payment information.

Thank you,
Thomas

06-03-2015, 11:44 PM	#151
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: 1972 C10 Parting how much for side mirrors and front bumper brackets to 75023

06-04-2015, 08:54 AM	#152
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: 1972 C10 Parting Hi, I need a DS trailing arm in good condition??? __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

06-04-2015, 04:02 PM	#156
hddeluxe1 Registered User Join Date: Jun 2015 Location: Pilot Rock,Or Posts: 13	Re: 1972 C10 Parting I wish to purchase both rear upper shock mounts.Let me know how to send payment and include shipping rate to 97868 if you could please.Thanks. hddeluxe1

06-04-2015, 04:05 PM	#157
bgravesm Registered User Join Date: Jun 2015 Location: Fairfax, VA Posts: 1	Re: 1972 C10 Parting Do you have any gas pedal assemblies for a 71-72? Thanks

06-17-2015, 06:00 PM	#159
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 1972 C10 Parting Is the power booster available for a C10? would need the brackets as well...shipped to 90601

06-17-2015, 09:39 PM	#160
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,427	Re: 1972 C10 Parting Do you still have the white door panels?

06-18-2015, 09:22 AM	#162
Dano4163 Registered User Join Date: Jun 2015 Location: Wayne, Ohio Posts: 12	Re: 1972 C10 Parting I am interested in buying all 4 of the leaf spring hangers if they will fit a 1969 Gmc 1/2 ton. Shipped to 43466.

06-23-2015, 10:43 AM	#163
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: 1972 C10 Parting Trailing arm arrived in the UK and its perfect, very clean. Thanks Thomas. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

07-08-2015, 11:23 AM	#164
DLTruck1973 Registered User Join Date: Jan 2015 Location: Junction City OR Posts: 1,758	Re: 1972 C10 Parting ttt

07-08-2015, 12:48 PM	#165
ddiaz90503 Registered User Join Date: Jun 2015 Location: torrance ca. Posts: 24	Re: 1972 C10 Parting Is the grill emblem still avail?

07-09-2015, 02:53 PM	#167
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 1972 C10 Parting looking for the power booster with all brackets for a C-10 on pic#2. is it still available? thanks

07-09-2015, 03:43 PM	#169
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 1972 C10 Parting sounds good. can I see some pics before i commit? total with shipping to 90601 . thank you

07-12-2015, 01:51 PM	#171
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 1972 C10 Parting PM sent

07-12-2015, 05:16 PM	#172
NovaBrad Registered User Join Date: Aug 2014 Location: Huntley,Illinois Posts: 21	Re: 1972 C10 Parting Do you still the engine wire harness and front light wire harness available? If so can you please post a couple pictures. I am interested. Thanks.

07-12-2015, 09:05 PM	#173
buick1 Registered User Join Date: Sep 2013 Location: stillwater mn Posts: 13	Re: 1972 C10 Parting Hello Do you still have left front parking light housing with wiring? I don't need the lense, just the housing and wiring pigtail! How much freight to 55082? Thanks! Dan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.