Daverods project 66 - Page 70 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 05-27-2010, 12:18 AM

I had an extra 350 transmission. I just painted it and used it. Got my flex plate bolted on. Installl the TC and mounted the trans to the engine. Need to get my brackets welded on my axle and get my drive line shortened. Scripped one of the threads when I went to put the flex plate on. Sucked. Had to do a helicoil.

daverod · 05-27-2010, 12:21 AM

Guy at Autozone had one of these. I thought he built it from scratch at first. Looked way cool. It's a kit $150-200. Goes 40 and gets 150 mpg.

Island park and back for $5.

daverod · 05-27-2010, 12:26 AM

Quote:

Originally Posted by ruffrida2005

looks like you just pulled the guts of the seal out. Go get another one and put it in.

The seal was aready out. I thought the pump thing was the seal and tried to pul it out.

daverod · 05-27-2010, 12:27 AM

Quote:

Originally Posted by watahyahknow

check the converter too maibe it has a groove in it causing the new seal to get ripped too ....... there sleeves available to repair that

Does the sleeve go on the TC?

The TC I used was kinda worn alittle on the shaft. I was wondering if I should get a new one. Hay I gotta start cutting or I'll never get done.

watahyahknow · 05-27-2010, 03:26 AM

TC ? it goes on the torque converter the part the (now destroyed) seal slides over on the outside

daverod · 05-27-2010, 10:43 AM

Quote:

Originally Posted by watahyahknow

TC ? it goes on the torque converter the part the (now destroyed) seal slides over on the outside

TC torque converter. I was getting lazy. I saw that sleeve when I bought the seal. I thinking I should have got it.

The end of the TC I used was alittle worn. No sharp edges just alittle wavy.

watahyahknow · 05-27-2010, 06:38 PM

dont know anything about the exact mounting procedures or if you need to machine the surface for the bushing or just sand it down get it to slide over but i guess that bushing is made from pretty thin material you need to press on there maibe you should ask an trans rebuilder if its a hard job and how to do it

daverod · 05-27-2010, 10:51 PM

Worked on my drive line. Looks like I need it about 6 3/4 " shorter. Guy said he would do it for $65. Put a new carrier on. Leveled my frame to see how much the line increases and decreases when the axle moves up and down. It was only about a 1" in differance.

Bought a sleeve for my torque converter now I just need to see how to get it on.

ruffrida2005 · 07-10-2010, 07:28 PM

Hey man you know your last post was over a month ago. You better get some work done.

Strodder · 07-10-2010, 10:31 PM

Quote:

Originally Posted by ruffrida2005

Hey man you know your last post was over a month ago. You better get some work done.

Yeah, I agree!!! I guess I shouldn't talk.

I need to get motivated.

bubba327 · 07-11-2010, 12:27 AM

I know he is alive --I sent him a PM yesterday -I was trying to get him to come to Northwest Motorfest in SW Idaho
Dave .........Check in with progress and pictures please

daverod · 07-11-2010, 01:22 PM

I'm still here. Broke but still here. I know you have some pictures to show us Bubba.

daverod · 07-11-2010, 01:28 PM

Got my tabs welded on my axle, used JB weld to seal up the seams on my bed sides. Put some more plates in my bed. Need to get a different yolk for my transmission the one I have has the smaller u joint. Looks like about 4" needed to be cut off the end of the drive line.

daverod · 07-11-2010, 01:35 PM

Few more. Wish my dog would learn to jump.

ruffrida2005 · 07-11-2010, 10:59 PM

those are sweet and looking good Dav. keep at it.

Strodder · 07-12-2010, 10:50 AM

I love this one. The caption should say:
"WHAT THE HELL YOU LOOKEN AT?"

MacAttack · 07-12-2010, 12:03 PM

Great looking work and beautiful dog.

jgh64pkup · 07-12-2010, 12:32 PM

lookin good dave

daverod · 07-12-2010, 12:54 PM

Quote:

Originally Posted by Strodder

I love this one. The caption should say:
"WHAT THE HELL YOU LOOKEN AT?"

He's waiting for me to come pick him up.

His balls are to big he has'nt learned to jump.

watahyahknow · 07-12-2010, 07:14 PM

leave him there long enough and he yawhn and jump in on his own hes just playing yah

the floor with the licenceplates is a nice idea haven seen that one before

tiggamonsta · 07-12-2010, 08:03 PM

He's got you trained well Daverod.

Although with a Rotti's tendency to hip problems it is probably best to lift him in.

daverod · 07-14-2010, 10:51 PM

Got my drive line cut and balanced. Had to buy a different yoke, switched everything to the bigger u joint size. Installed new carrier bearing.

Welded up the bolt holes where the chains attached on my bedsides. Sanded down my roof on the 64 skimcoated it, shot it with some feather fill and painted it. Maybe do the back of the cab next weekend.

ruffrida2005 · 07-14-2010, 11:02 PM

Looking good Dave

daverod · 07-14-2010, 11:10 PM

Thanks and no you can't have my roof. I know you want it. I saw there was one on ebay.

bubba327 · 07-31-2010, 12:48 AM

Is this thread going to die a slow death?? Dave you cant quit us now. Keep working on it.. Any progress is still good progress

05-27-2010, 12:18 AM	#1726
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I had an extra 350 transmission. I just painted it and used it. Got my flex plate bolted on. Installl the TC and mounted the trans to the engine. Need to get my brackets welded on my axle and get my drive line shortened. Scripped one of the threads when I went to put the flex plate on. Sucked. Had to do a helicoil. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

05-27-2010, 12:21 AM	#1727
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Guy at Autozone had one of these. I thought he built it from scratch at first. Looked way cool. It's a kit $150-200. Goes 40 and gets 150 mpg. Island park and back for $5. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 05-27-2010 at 12:22 AM.

05-27-2010, 03:26 AM	#1730
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 TC ? it goes on the torque converter the part the (now destroyed) seal slides over on the outside __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

05-27-2010, 06:38 PM	#1732
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 dont know anything about the exact mounting procedures or if you need to machine the surface for the bushing or just sand it down get it to slide over but i guess that bushing is made from pretty thin material you need to press on there maibe you should ask an trans rebuilder if its a hard job and how to do it __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

05-27-2010, 10:51 PM	#1733
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Worked on my drive line. Looks like I need it about 6 3/4 " shorter. Guy said he would do it for $65. Put a new carrier on. Leveled my frame to see how much the line increases and decreases when the axle moves up and down. It was only about a 1" in differance. Bought a sleeve for my torque converter now I just need to see how to get it on. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 05-27-2010 at 10:59 PM.

07-10-2010, 07:28 PM	#1734
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Hey man you know your last post was over a month ago. You better get some work done. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

07-11-2010, 12:27 AM	#1736
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 I know he is alive --I sent him a PM yesterday -I was trying to get him to come to Northwest Motorfest in SW Idaho Dave .........Check in with progress and pictures please __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

07-11-2010, 01:22 PM	#1737
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I'm still here. Broke but still here. I know you have some pictures to show us Bubba. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-11-2010 at 01:45 PM.

07-11-2010, 01:28 PM	#1738
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Got my tabs welded on my axle, used JB weld to seal up the seams on my bed sides. Put some more plates in my bed. Need to get a different yolk for my transmission the one I have has the smaller u joint. Looks like about 4" needed to be cut off the end of the drive line. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-11-2010 at 01:41 PM.

07-11-2010, 01:35 PM	#1739
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Few more. Wish my dog would learn to jump. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-11-2010, 10:59 PM	#1740
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 those are sweet and looking good Dav. keep at it. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

07-12-2010, 10:50 AM	#1741
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 I love this one. The caption should say: "WHAT THE HELL YOU LOOKEN AT?" __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-12-2010, 12:03 PM	#1742
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Daverods project 66 Great looking work and beautiful dog. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

07-12-2010, 12:32 PM	#1743
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 lookin good dave __________________ Gage 1967 C10 Shortbed Stepside

07-12-2010, 07:14 PM	#1745
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 leave him there long enough and he yawhn and jump in on his own hes just playing yah the floor with the licenceplates is a nice idea haven seen that one before __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts



Register or Log In To remove these advertisements.

07-12-2010, 08:03 PM	#1746
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: Daverods project 66 He's got you trained well Daverod. Although with a Rotti's tendency to hip problems it is probably best to lift him in.

07-14-2010, 10:51 PM	#1747
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Got my drive line cut and balanced. Had to buy a different yoke, switched everything to the bigger u joint size. Installed new carrier bearing. Welded up the bolt holes where the chains attached on my bedsides. Sanded down my roof on the 64 skimcoated it, shot it with some feather fill and painted it. Maybe do the back of the cab next weekend. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-14-2010 at 10:56 PM.

07-14-2010, 11:02 PM	#1748
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Looking good Dave __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

07-14-2010, 11:10 PM	#1749
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Thanks and no you can't have my roof. I know you want it. I saw there was one on ebay. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 07-14-2010 at 11:11 PM.

07-31-2010, 12:48 AM	#1750
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Is this thread going to die a slow death?? Dave you cant quit us now. Keep working on it.. Any progress is still good progress __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

Register or Log In To remove these advertisements.