02-20-2016, 10:28 AM | #176 |
Registered User
Join Date: Jan 2013
Location: Imperial, MO
Posts: 1,003
|
Re: My caster mod (with pictures)
I left the saddles in place with the stock rivets as well. Not certain why the OP removed them only to reinstall with socketheads.
|
02-20-2016, 11:29 AM | #177 |
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: My caster mod (with pictures)
I installed socket heads. One of the reasons is someone previously mounted the lower a-arms and didn't ensure they were seated properly, the locating pins were crushed some and I wanted to ensure they worked properly.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
02-20-2016, 11:34 AM | #178 |
Registered User
Join Date: Mar 2005
Location: apple valley, ca
Posts: 2,670
|
Re: My caster mod (with pictures)
It wasn't really a requirement to knock out the rivets on the saddles. I just wanted maximum engagement on all four points. I machined the new spotfaces in the shafts .005" over the diameter of the Grade 8 socket heads, and the added height of the sockethead (versus the height of the rivet) makes for a positive interaction where the shaft locks in to the saddle. With the rivet, you're only engaged at the height of the outer lip. It'll work fine, because that's all the factory required, but I tend to overkill when it comes to suspensions.
__________________
Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527 |
04-22-2016, 09:02 PM | #179 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: My caster mod (with pictures)
Hey guys, I moved my LCA's ahead by 3/4". They were original steel bushing style shafts.
I got an alignment done today. The caster reading was 5.5 degrees. Just an FYI...
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram |
05-12-2016, 06:08 PM | #180 | |
Registered User
Join Date: May 2011
Location: Missoula, MT
Posts: 934
|
Re: My caster mod (with pictures)
Quote:
__________________
69 GMC C10 build thread- http://67-72chevytrucks.com/vboard/s...d.php?t=501676 03 Silverado build thread-http://67-72chevytrucks.com/vboard/s...d.php?t=591582 |
|
05-12-2016, 07:58 PM | #181 | |
Registered User
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
|
Re: My caster mod (with pictures)
Quote:
__________________
Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever! |
|
05-13-2016, 02:56 PM | #182 | |
Registered User
Join Date: May 2011
Location: Missoula, MT
Posts: 934
|
Re: My caster mod (with pictures)
Quote:
__________________
69 GMC C10 build thread- http://67-72chevytrucks.com/vboard/s...d.php?t=501676 03 Silverado build thread-http://67-72chevytrucks.com/vboard/s...d.php?t=591582 |
|
05-13-2016, 04:24 PM | #183 |
Registered User
Join Date: Dec 2009
Location: Kirkland, WA
Posts: 1,302
|
Re: My caster mod (with pictures)
I think you'd have to twist one cap one way, the other cap the opposite -- otherwise you'd draw the caps in or move them out equally netting no caster gain. I'd be concerned about removing bearing surface on the one end of the shaft though, causing premature wearout since the caps are the actual friction surfaces.
__________________
1968 LWB C20 / AC / Wood Bed |
05-14-2016, 11:42 AM | #184 | |
Registered User
Join Date: May 2011
Location: Missoula, MT
Posts: 934
|
Re: My caster mod (with pictures)
Quote:
__________________
69 GMC C10 build thread- http://67-72chevytrucks.com/vboard/s...d.php?t=501676 03 Silverado build thread-http://67-72chevytrucks.com/vboard/s...d.php?t=591582 |
|
10-11-2016, 03:33 PM | #185 |
Registered User
Join Date: May 2010
Location: Stillwater,MN
Posts: 39
|
Re: My caster mod (with pictures)
Ended up doing my arms, got the idea from Rob but decided to take a different approach I saw another member here took. I am on a tight budget so went this way, might brace them up a bit, we will see. I'm not the best fabricator, but I'm happy with them. Moved them over .75
Thanks to everybody. |
10-11-2016, 05:38 PM | #186 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: My caster mod (with pictures)
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
10-12-2016, 12:45 AM | #187 |
Registered User
Join Date: May 2010
Location: Stillwater,MN
Posts: 39
|
Re: My caster mod (with pictures)
|
10-12-2016, 08:19 AM | #188 |
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,566
|
Re: My caster mod (with pictures)
I am sorry? WHY did you do this? I would not run those even with bracing and plating. Seems to have defeated the purpose and created a dangerous situation. Please explain.
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
10-12-2016, 08:46 AM | #189 |
Registered User
Join Date: May 2010
Location: Stillwater,MN
Posts: 39
|
Re: My caster mod (with pictures)
Lol what purpose was defeated here? Little dramatic aye?
Posted via Mobile Device |
10-12-2016, 09:55 AM | #190 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: My caster mod (with pictures)
A piece of 3/16 plate across the bottom & on the sides (F&R).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
10-12-2016, 09:57 AM | #191 |
Registered User
Join Date: May 2010
Location: Stillwater,MN
Posts: 39
|
Re: My caster mod (with pictures)
Thanks. I have two more sets of arms so if these don't work
I'll try a different method. Posted via Mobile Device |
10-12-2016, 11:24 AM | #192 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,921
|
Re: My caster mod (with pictures)
Definitely plate top/bottom. Don't want that breaking off while driving!
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
10-12-2016, 11:33 AM | #193 |
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: My caster mod (with pictures)
Have you installed "skid plates" on the lower parts of your front end
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
10-12-2016, 11:39 AM | #194 |
Registered User
Join Date: May 2010
Location: Stillwater,MN
Posts: 39
|
Re: My caster mod (with pictures)
Ok bad idea, I get it. As soon as I did it I wasn't very confident, not sure if bracing will be enough??
Ill just do the way Rob did it with moving the BJ hole over with another set of arms I have. |
10-12-2016, 11:51 AM | #195 |
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: My caster mod (with pictures)
I have had a experience with skid plates and lower suspension parts!
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
10-12-2016, 12:15 PM | #196 |
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,566
|
Re: My caster mod (with pictures)
OH my! Are you ok? Do tell the story.
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
10-12-2016, 12:25 PM | #197 |
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: My caster mod (with pictures)
Long story !
Very interesting ride, until we got the truck off the road! All fixed and gaining more confidence every day
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
10-12-2016, 12:31 PM | #198 |
Registered User
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,566
|
Re: My caster mod (with pictures)
Just trying to save a life here. Sorry I was dramatic. I meant no harm. Just doesn't look safe. If you moved the arm forward by the mod method, and then moved the ball joint mounting then didn't you basically just move the place where the spring sits? I just don't follow what you've done here. I am a little slow today. Again, I mean no harm just trying to figure this out. As I understand the MOD it moves the whole arm and that is what it is intended to do. Or did you move the ball joint in the same direction creating even more caster?
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350 |
10-12-2016, 12:58 PM | #199 |
Registered User
Join Date: Dec 2009
Location: Kirkland, WA
Posts: 1,302
|
Re: My caster mod (with pictures)
I don't see any problem with modding the arms the way ranger has, as long as he ties in the sides and welds a plate across the bottom. He's just moving the balljoint over to improve caster while leaving the spring pocket in the correctly aligned location.
@solidaxel, how did you manage to drag your lower balljoint on the ground? Did your wheel fall off?
__________________
1968 LWB C20 / AC / Wood Bed |
10-12-2016, 01:24 PM | #200 |
Registered User
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
|
Re: My caster mod (with pictures)
I did my first set of arms in a similar way.
The plating is more important on the sides than top and bottom. You lost the strength of the arms when you cut through the sides. Think of bending a ruler when it is flat vs standing on its side.
__________________
David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy |
Bookmarks |
|
|