1967 C10 Custom Big Window - Page 85 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 07-23-2012, 05:22 PM

The rims will be a nice change of pace! Looking forward to seeing the bed complete

Slick67 · 07-23-2012, 11:02 PM

Quote:

Originally Posted by VA72C10

The rims will be a nice change of pace! Looking forward to seeing the bed complete

I think so too, blingy is nice sometimes but oldschool will always be cool. The wood is beginning to test my patience, 45 degree cuts at a sweeping angle are a pain, sure you understand that one!!! Lot's of custom stuff going into the wood kit and when it's done I will have to tell the secrets of what I had to use to make it work....should be a good laugh!

Slick67 · 07-26-2012, 11:20 AM

I'm confident someone will give me a mound of crap about this, but I couldn't think of a better solution or material to lay under the wood! Plastic lattice from Home Depot!!!!

It's 1/8 inch and works out perfect to keep the wood down low but still able to breath. It won't rot or rust either!! It is slow going doing this wood kit, but it is getting closer to finished.
Name: lattice.jpg
Views: 1200
Size: 41.5 KB

Name: lattice.jpg
Views: 1200
Size: 41.5 KB

Name: lattice1.jpg
Views: 1149
Size: 27.1 KB

Texas Pugh · 07-26-2012, 11:30 AM

I think that is a good solution. So when you put the strips on to hold down the boards does it bolt thru the bed and therefore they will hold down the boards and lattice to the bed? Thanks.

Slick67 · 07-26-2012, 02:51 PM

Quote:

Originally Posted by Texas Pugh

I think that is a good solution. So when you put the strips on to hold down the boards does it bolt thru the bed and therefore they will hold down the boards and lattice to the bed? Thanks.

Yep. The bolts will go through the floor but I also put a few self-tapping screws in the lattice to hold it down while installing everything. It seems to be working out really well!!

VA72C10 · 07-26-2012, 03:34 PM

I think the lattice is a great idea!!!

Slick67 · 07-26-2012, 03:55 PM

Quote:

Originally Posted by VA72C10

I think the lattice is a great idea!!!

Jonathan, I figured you would be the one that laughed at me for this idea! I purchased aluminum, steel, and even long peices of flat plastic, then I saw this and the bulb lit up!!

VA72C10 · 07-26-2012, 04:02 PM

No laughing here....that's really perfect because as you mentioned it has the holes to breathe but is a solid platform to space out the wood to not be against the metal directly....and it's not going to rot or disintegrate.

David67 · 07-26-2012, 04:16 PM

lol what are you some kind of Aggie or something?!

looks like it'll work really nicely!

original-71 · 07-26-2012, 04:24 PM

that wood floor is gonna look nice in your truck.

Slick67 · 07-26-2012, 04:25 PM

Quote:

Originally Posted by VA72C10

No laughing here....that's really perfect because as you mentioned it has the holes to breathe but is a solid platform to space out the wood to not be against the metal directly....and it's not going to rot or disintegrate.

Cool! I have your approval so I don't feel so bad now! Seemed that it worked better this way, not to mention it was only 30 bucks as opposed to over 80 for aluminum flatbar that would not support it as well.

Quote:

Originally Posted by David67

lol what are you some kind of Aggie or something?!

looks like it'll work really nicely!

HAHHAHHA

I wint to A n M fer inginneerin skoolin, see wat i can do! Thanks David! Hoping to have it all cut and the fitment corrected by the end of the weekend. Also putting the front tires on my rally wheels too, so maybe I will have some pics with them mounted on the truck this weekend!!!

Slick67 · 07-26-2012, 04:26 PM

Quote:

Originally Posted by original-71

that wood floor is gonna look nice in your truck.

Thanks! I hope it comes out nicely, you can come by and help if you like!!!!!

Texas Pugh · 07-26-2012, 04:29 PM

Farmers fight, farmers fight, farmers farmers farmers,.......FIGHT!

We Farmers like wooden lattice.......!

David67 · 07-26-2012, 04:31 PM

Quote:

Originally Posted by Slick67

HAHHAHHA

I wint to A n M fer inginneerin skoolin, see wat i can do! Thanks David! Hoping to have it all cut and the fitment corrected by the end of the weekend. Also putting the front tires on my rally wheels too, so maybe I will have some pics with them mounted on the truck this weekend!!!

hahaha you'd have had me fooled! But really it looks like a great idea! Good to hear.. I can't wait to see it with the wood and wheels

Slick67 · 07-26-2012, 04:32 PM

Quote:

Originally Posted by Texas Pugh

Farmers fight, farmers fight, farmers farmers farmers,.......FIGHT!

We Farmers like wooden lattice.......!

Ahh yes....the Farmers fight song!! Wooden lattice has a slight tendency to rot a little faster than the plastic, so the wood was at a disadvantage! Fer the house wood is good!!!

David67 · 07-26-2012, 04:32 PM

Quote:

Originally Posted by Texas Pugh

Farmers fight, farmers fight, farmers farmers farmers,.......FIGHT!

Hellz yeah!

Slick67 · 07-26-2012, 04:34 PM

Quote:

Originally Posted by David67

hahaha you'd have had me fooled! But really it looks like a great idea! Good to hear.. I can't wait to see it with the wood and wheels

I hope it turns out right or I'll be eatin crow! Those wheels are gonna look pretty sweet on it, probably look like a different truck all together!

David67 · 07-26-2012, 04:44 PM

Quote:

Originally Posted by Slick67

I hope it turns out right or I'll be eatin crow! Those wheels are gonna look pretty sweet on it, probably look like a different truck all together!

Yep completely different! You're getting me motivated to work on my bed lol

original-71 · 07-26-2012, 04:54 PM

Quote:

Originally Posted by Slick67

Thanks! I hope it comes out nicely, you can come by and help if you like!!!!!

man i would love to and pop some different kinda LIGHTS

ive been busy and really wanted to go to Texas Heatwave but work comes first. i may actually try to make out to Niftee 50tees for the first time this year on saturday you going?

Slick67 · 07-26-2012, 05:03 PM

Quote:

Originally Posted by original-71

man i would love to and pop some different kinda LIGHTS

ive been busy and really wanted to go to Texas Heatwave but work comes first. i may actually try to make out to Niftee 50tees for the first time this year on saturday you going?

I am going to CureFest 2012, they are having a car and bike show. Live bands, food, fun, car show is away from the mass crowds so the rides are safe. $10 entry fee. Gates open at 9am for show vehicles to come in, come and go as you please. $10 dollar entry fee also gets you in the gate for all the fun.

original-71 · 07-26-2012, 05:09 PM

Quote:

Originally Posted by Slick67

I am going to CureFest 2012, they are having a car and bike show. Live bands, food, fun, car show is away from the mass crowds so the rides are safe. $10 entry fee. Gates open at 9am for show vehicles to come in, come and go as you please. $10 dollar entry fee also gets you in the gate for all the fun.

have fun, ill be at work till the afternoon

Slick67 · 07-27-2012, 10:45 AM

Quote:

Originally Posted by original-71

have fun, ill be at work till the afternoon

Sorry bro, but you can still swing by Saturday evening and finish the bed for me. I'll feed ya some refreshing adult beverages....afterwards!!!

Slick67 · 07-29-2012, 02:23 PM

Took a little time off from the bed and finally got the rally rims on. Looks old school!!!

Name: rally3.jpg
Views: 5004
Size: 49.5 KB

**67cheby** · 07-29-2012, 02:26 PM

Great classy look
Posted via Mobile Device

Slick67 · 07-29-2012, 02:27 PM

Quote:

Originally Posted by 67cheby

Great classy look
Posted via Mobile Device

Thanks Mike! They do give it a different look for sure.

07-23-2012, 05:22 PM	#2101
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1967 C10 Custom Big Window The rims will be a nice change of pace! Looking forward to seeing the bed complete __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-26-2012, 11:20 AM	#2103
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window I'm confident someone will give me a mound of crap about this, but I couldn't think of a better solution or material to lay under the wood! Plastic lattice from Home Depot!!!! It's 1/8 inch and works out perfect to keep the wood down low but still able to breath. It won't rot or rust either!! It is slow going doing this wood kit, but it is getting closer to finished. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

07-26-2012, 11:30 AM	#2104
Texas Pugh Registered User Join Date: Jul 2012 Location: Midlothian, Texas Posts: 72	Re: 1967 C10 Custom Big Window I think that is a good solution. So when you put the strips on to hold down the boards does it bolt thru the bed and therefore they will hold down the boards and lattice to the bed? Thanks.

07-26-2012, 03:34 PM	#2106
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1967 C10 Custom Big Window I think the lattice is a great idea!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-26-2012, 04:02 PM	#2108
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 1967 C10 Custom Big Window No laughing here....that's really perfect because as you mentioned it has the holes to breathe but is a solid platform to space out the wood to not be against the metal directly....and it's not going to rot or disintegrate. __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-26-2012, 04:16 PM	#2109
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: 1967 C10 Custom Big Window lol what are you some kind of Aggie or something?! looks like it'll work really nicely! __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

07-26-2012, 04:24 PM	#2110
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: 1967 C10 Custom Big Window that wood floor is gonna look nice in your truck. __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

07-26-2012, 04:29 PM	#2113
Texas Pugh Registered User Join Date: Jul 2012 Location: Midlothian, Texas Posts: 72	Re: 1967 C10 Custom Big Window Farmers fight, farmers fight, farmers farmers farmers,.......FIGHT! We Farmers like wooden lattice.......!

07-29-2012, 02:23 PM	#2123
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 1967 C10 Custom Big Window Took a little time off from the bed and finally got the rally rims on. Looks old school!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

07-29-2012, 02:26 PM	#2124
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1967 C10 Custom Big Window Great classy look Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.