80 Scottsdale build - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

UKNOWME · 07-12-2018, 12:34 AM

Finally installed my cab trim and tailgate band

**TKCR** · 07-12-2018, 07:47 AM

Very Nice!!! I think all the trim makes the truck POP!!
Where did you get your trim?
I seen The Truck & Car Shop has the 81-87 cab trim.

UKNOWME · 07-12-2018, 08:59 AM

Quote:

Originally Posted by TKCR

Very Nice!!! I think all the trim makes the truck POP!!
Where did you get your trim?
I seen The Truck & Car Shop has the 81-87 cab trim.

Thanks! That’s where I bought the cab trim. The tailgate band is NOS.

**Hart_Rod** · 07-12-2018, 12:41 PM

Looks like a totally different truck with the trim on,

!

UKNOWME · 07-12-2018, 02:29 PM

Quote:

Originally Posted by Hart_Rod

Looks like a totally different truck with the trim on,

!

Thanks

Oscar the grouch · 07-12-2018, 11:05 PM

Your truck started off like the 78 I just plcked up in ruidoso 😎

UKNOWME · 07-13-2018, 01:23 AM

Quote:

Originally Posted by Oscar the grouch

Your truck started off like the 78 I just plcked up in ruidoso 😎

Funny, my truck came from Los Lunas

Oscar the grouch · 07-13-2018, 09:27 AM

Go figure I couldn't find a decent one locally or one that wasn't overpriced, by the way beautiful truck gives me some inspiration on the direction I will go.

UKNOWME · 09-03-2018, 10:10 PM

This past week has been very productive as c10sinthepark is right around the corner. I changed out the water pump that has been leaking for quite some time. Installed the new to me OEM hood with WamRods. Swapped out my generic LMC grille for a GM restoration parts 73-74 grille. Last I got a little nip & tuck on both bumpers. I’m very pleased with the results. Couldn’t have done it without all the help from my friends.

**TKCR** · 09-04-2018, 08:52 AM

Everything looks nice, especially the bumpers. And the Grille looks good too, I like seeing the emblem on there.

The bumpers is always something I notice Chip Foose doing on that Overhaulin' Show. It's amazing how little things like that can make the vehicle look so much better.

blazer2007 · 09-04-2018, 10:34 AM

I just noticed the wamrods, I looked thru the build but didn,t see any info or did I miss a page. I didn,t know they had them for 73-80

z71se · 09-15-2018, 10:31 PM

Quote:

Originally Posted by UKNOWME

This past week has been very productive as c10sinthepark is right around the corner. I changed out the water pump that has been leaking for quite some time. Installed the new to me OEM hood with WamRods. Swapped out my generic LMC grille for a GM restoration parts 73-74 grille. Last I got a little nip & tuck on both bumpers. I’m very pleased with the results. Couldn’t have done it without all the help from my friends.

Any advice on how you this? I just got my bumpers back from chrome and would like to do the same on my 77. I assume you slotted the left and right side brackets in the rear. For the front side brackets, you slotted the middle brackets and probably slotted and bent the side brackets?

UKNOWME · 09-16-2018, 12:13 AM

Quote:

Originally Posted by blazer2007

I just noticed the wamrods, I looked thru the build but didn,t see any info or did I miss a page. I didn,t know they had them for 73-80

They recently released these for the 73-80 trucks

UKNOWME · 09-16-2018, 12:15 AM

Quote:

Originally Posted by z71se

Any advice on how you this? I just got my bumpers back from chrome and would like to do the same on my 77. I assume you slotted the left and right side brackets in the rear. For the front side brackets, you slotted the middle brackets and probably slotted and bent the side brackets?

Front frame horn was cut and reworded to shorten. Side brackets just drilled new holes further in the frame. Have to not the drivers side for steering gear clearance. Rear brackets shortened and others drilled further in.

**Dads79GMC** · 09-19-2018, 11:40 AM

Extremely nice!!

SATXRusty · 11-12-2018, 04:14 PM

Quote:

Originally Posted by UKNOWME

This past week has been very productive as c10sinthepark is right around the corner. I changed out the water pump that has been leaking for quite some time. Installed the new to me OEM hood with WamRods. Swapped out my generic LMC grille for a GM restoration parts 73-74 grille. Last I got a little nip & tuck on both bumpers. I’m very pleased with the results. Couldn’t have done it without all the help from my friends.

Where did you buy the 73-74 grille from? I have yet to find anyone who still has the reproduction available.
Posted via Mobile Device

UKNOWME · 11-12-2018, 04:47 PM

Quote:

Originally Posted by SATXRusty

Where did you buy the 73-74 grille from? I have yet to find anyone who still has the reproduction available.
Posted via Mobile Device

This grille was purchased from KeyParts as a GM restoration part but has since be discontinued. I do not know of anyone that is making them at the moment.

UKNOWME · 11-12-2018, 04:50 PM

Installed the newly release US Mags Boulevard rims also. I really love em!

UKNOWME · 11-12-2018, 04:55 PM

New licence plate too

3drburb · 11-19-2018, 01:31 PM

Nice, I like the new wheels and the plate. The truck looks awesome as always.

UKNOWME · 11-19-2018, 01:42 PM

Quote:

Originally Posted by 3drburb

Nice, I like the new wheels and the plate. The truck looks awesome as always.

Thank you very much

kipps · 11-20-2018, 01:42 PM

Any explanation of the "New Mexico Milk" front plate? Are you a producer?

UKNOWME · 11-20-2018, 02:36 PM

Quote:

Originally Posted by kipps

Any explanation of the "New Mexico Milk" front plate? Are you a producer?

No but I live in a area that is heavily populated with dairies and the largest cheese plant in the US. My pay check is greatly influenced by my dairy customers and when one gave me the plate I thought it would be cool to put it on that truck. Around here it’s no big deal but at shows or out of town it creates interest.

kipps · 11-20-2018, 07:29 PM

Quote:

Originally Posted by UKNOWME

No but I live in a area that is heavily populated with dairies and the largest cheese plant in the US. My pay check is greatly influenced by my dairy customers and when one gave me the plate I thought it would be cool to put it on that truck. Around here it’s no big deal but at shows or out of town it creates interest.

Thanks. It caught my eye, because that's what I spend my time at. It's a very small dairy, just 50 Jerseys with some grazing, and I'm a one man show. Not very profitable, but I still have hope.

photo-tom · 11-22-2018, 03:11 PM

Bichin build, sir.

07-12-2018, 12:34 AM	#201
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 80 Scottsdale build Finally installed my cab trim and tailgate band Attached Images __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

07-12-2018, 07:47 AM	#202
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,979	Re: 80 Scottsdale build Very Nice!!! I think all the trim makes the truck POP!! Where did you get your trim? I seen The Truck & Car Shop has the 81-87 cab trim. __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

07-12-2018, 12:41 PM	#204
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 80 Scottsdale build Looks like a totally different truck with the trim on, ! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-12-2018, 11:05 PM	#206
Oscar the grouch Registered User Join Date: Oct 2016 Location: los lunas nm Posts: 63	Re: 80 Scottsdale build Your truck started off like the 78 I just plcked up in ruidoso 😎 Attached Images __________________ 1970 chevy k10 305/4 speed

07-13-2018, 09:27 AM	#208
Oscar the grouch Registered User Join Date: Oct 2016 Location: los lunas nm Posts: 63	Re: 80 Scottsdale build Go figure I couldn't find a decent one locally or one that wasn't overpriced, by the way beautiful truck gives me some inspiration on the direction I will go. __________________ 1970 chevy k10 305/4 speed

09-03-2018, 10:10 PM	#209
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 80 Scottsdale build This past week has been very productive as c10sinthepark is right around the corner. I changed out the water pump that has been leaking for quite some time. Installed the new to me OEM hood with WamRods. Swapped out my generic LMC grille for a GM restoration parts 73-74 grille. Last I got a little nip & tuck on both bumpers. I’m very pleased with the results. Couldn’t have done it without all the help from my friends. Attached Images __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

09-04-2018, 08:52 AM	#210
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,979	Re: 80 Scottsdale build Everything looks nice, especially the bumpers. And the Grille looks good too, I like seeing the emblem on there. The bumpers is always something I notice Chip Foose doing on that Overhaulin' Show. It's amazing how little things like that can make the vehicle look so much better. __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

09-04-2018, 10:34 AM	#211
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: 80 Scottsdale build I just noticed the wamrods, I looked thru the build but didn,t see any info or did I miss a page. I didn,t know they had them for 73-80

09-19-2018, 11:40 AM	#215
Dads79GMC Senior Member Join Date: Feb 2008 Location: Des Moines, Iowa Posts: 1,238	Re: 80 Scottsdale build Extremely nice!! __________________ Instagram @HomeBuiltC10s Dads 79 GMC Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=642929 1978 Silverado Build http://67-72chevytrucks.com/vboard/s...d.php?t=756016

11-12-2018, 04:50 PM	#218
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 80 Scottsdale build Installed the newly release US Mags Boulevard rims also. I really love em! Attached Images __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

11-12-2018, 04:55 PM	#219
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: 80 Scottsdale build New licence plate too Attached Images __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

11-19-2018, 01:31 PM	#220
3drburb Registered User Join Date: Jul 2011 Location: Kent, WA. Posts: 856	Re: 80 Scottsdale build Nice, I like the new wheels and the plate. The truck looks awesome as always.

11-20-2018, 01:42 PM	#222
kipps Registered User Join Date: Jul 2014 Location: North-central Virginia Posts: 1,104	Re: 80 Scottsdale build Any explanation of the "New Mexico Milk" front plate? Are you a producer?

11-22-2018, 03:11 PM	#225
photo-tom Registered User Join Date: Jul 2016 Location: MINNEAPOLIS Posts: 36	Re: 80 Scottsdale build Bichin build, sir.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.